Water Quality

UN Number: UN3316

In this Sodium Hydroxide Test Kit a sample is reacted with barium to precipitate any carbonates, then is titrated with a standard acid to the phenolphthalein endpoint. Range/sensitivity is 0-10%/0.2% NaOH # Tests (# Rgts) is 50 at 10% (4) The Sodium Hydroxide Test Kit contains the following: (30...

Tube test for the determination of Fluoride. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Fluoride - 0.1–2.0 mg/L F?

The Legionella Single Test Kit detects the presence of Legionella in a filtered water sample.It contains everything you need to perform one test with the highest accuracy. With results in 30-35 minutes (including sample prep-time), the test allows for immediate understanding and response to the...

Standard test for the determination of Silica. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Silica - 0.01–10.0 mg/L Si, Silica - 0.02–10.0 mg/L SiO2

Direct Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and...

UN Number: UN3316

Applications: Industrial Water Boiling and Cooling, Water and Wastewater This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

Methods The alkalinity of water is a measurement of its buffering capacity. Alkalinity of natural waters is typically a combination of bicarbonate, carbonate, and hydroxide ions. Sewage and wastewaters usually exhibit higher alkalinities due to the presence of silicates and phosphates. Alkalinity...

Tube test for the determination of COD. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: COD - 400–4000 mg/L O2

For measuring water turbidity (cloudiness) according to either EPA or ISO Standards Easy Calibration and Operation Auto Ranging from 0-1100 NTU Simple 5 key operation Signal Averaging for stable and accurate readings Long Battery and Bulb Life Portable for use either in the lab or field Choose TB...

Tube test for the determination of Nitrite. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Nitrite - 0.003–0.460 mg/L NO2-N, Nitrite - 0.02–1.50 mg/L NO2?

VISOCOLOR Powder Pillows Phosphate reagent set for photometric determination of Phosphate. Ideal for drinking water, surface water and waste water analysis. Measuring range: 0.03-4.50 mg/L PO4-P __UN 3316 Chemical kit 9 II 0.004 KG ADR/GGVSEB M11 (E) ADR 3.3.1/251 PAX 960 10 KG CAO 960 10 KG Q:...

Ensure accurate and reliable detection of peroxide levels in your water samples with this high-quality Peroxide Test. Designed for precision and ease of use, it offers an efficient solution for monitoring water quality in various settings, from research laboratories to water treatment facilities....

Tube test for the determination of COD. Precise rapid tests for all kind of water and waste water samples according to ISO 15705. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: COD - 2–40 mg/L O2

Spectroquant® Cyanuric Acid Test Method: photometric

Double Roll Hydrion Quat Check Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, specifically Alkyldimethylbenzyl ammonium compounds, Rocall II, and Hyamine 3500. With color matches within the Hi Range of 0-200-400-600-800-1000ppm...

Tube test for the determination of Chlorine dioxide. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Chlorine dioxide - 0.15–5.00 mg/L

EPA-accepted method for NPDWR and NPDES Employs modified APHA Argentometric method Range of 0 to 50 ppm Cl in 1 ppm increments Sufficient for 50 tests Range of 0 to 200 ppm Cl in 4 ppm increments Sufficient for 50 tests at 200 ppm Employs Argentometric method

Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),...

Sensafe® Low Range Peroxide Check is a break through in testing for Hydrogen Peroxide (H2O2). Utilizing ITS’ patented aperture technology, this strip allows for detection levels of 0.05, 0.3, 0.5, 1.0, 2.0, and 4.0 ppm, all in an easy dip and read procedure. Simply dip the patented...

UN Number: UN3316

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...

Formaldehyde, a toxic substance, is used in the following applications: metal plating baths, textile treatments, biological specimen preservatives, and disinfectants of medical equipment. Commercial formaldehyde gas is readily soluble in water. The Purpald Method Reference: Purpald® developed by...