Water Quality

Spectroquant® Residual Hardness Cell Test Method: photometric

Tube test for the determination of COD. Precise rapid tests for all kind of water and waste water samples according to ISO 15705. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: COD - 5–60 mg/L O2

Tube test for the determination of Organic complexing agents. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Organic complexing agents - 0.5–15.0 mg/L IBiK

Tube test for the determination of Chloride. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Chloride-0.10–1.00 g/L Cl?, Chloride-5–200 mg/L Cl?

Ideal for precise and reliable copper measurement, the Spectroquant Copper Test employs photometric technology for accurate quantification. This testing method offers high sensitivity, thus ensuring a comprehensive and detailed analysis. It is particularly useful in environmental testing and water...

LaMotte Company now offers an affordable, safe, and reliable screening test to identify lead in drinking water. Lead is still found in old pipes, solder and service lines. Corrosive water can leach lead into water supplies. In only 10 minutes the analyst can detect lead levels above 15 ppb, the EPA...

UN Number: UN3316

Tests the quality of water, these nitrate #1 tablets are part of the nitrate-nitrogen kit.

AQUADUR test sticks for the quick and easy determination of water hardness. Gradation: 3 >5 >10 >15 >20 >25 °d = 54 >90 >180 >270 >360 >450 ppm CaCO3

Tube test for the determination of polyoxy carbonic acides (POC). Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: POC - 20–200 mg/L POC AS 2020 , POC - 20–200 mg/L POC HS 2020

This Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10 ppm (4)

Standard test for the determination of Phosphate. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Phosphate (ortho) - 0.04–6.5 mg/L PO4-P , Phosphate (ortho) - 0.1–20.0 mg/L PO4³?

VISOCOLOR Powder Pillows Nitrate reagent set for photometric determination of Nitrate. Ideal for pool or drinking water analysis. Measuring range: 1.0 - 50 mg/L NO3-N

A kit from Solvay for the determination of for the determination of tetrakishydroxymethyl phosphonium sulfate (THPS). The iodometric titration may be used for fresh or salt water in oilfields, towers, pulp and paper, etc.

Tube test for the determination of ortho- and total Phosphate. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Phosphate (ortho) - 0.05–1.50 mg/L P , Phosphate (ortho) - 0.2–5.0...

UN Number: UN3316 pH: (H2O, 20°C) strongly acid Solubility: (20°C) soluble Density: 1.079 g/cm3 (20°C)

Molybdate is used throughout the industrial water treatment and power generation industries as a corrosion inhibitor in both open- and closed-loop cooling water systems. In solution, molybdate anions complex with oxidized iron to form a protective film of molybdate and ferric-oxide. Molybdate is...

Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater 2951HR High Range QAC test papers are specifically formulated to read high range levels of QAC. Range and sensitivity is 200, 400, 600, 1000, 1500 ppm.

Ethylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination originating...

Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl₂ in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

Detergents can be introduced into the water supply by industry, soap manufacturers, and private households. Environmental analysts often include a determination of anionic detergents when assessing surface water pollution. The Methylene Blue Method References: USEPA Methods for Chemical Analysis of...

Designed for accurate, reliable, and quick assessment of water pH levels, the MQuant colorimetric test kit offers a precise solution for water quality monitoring. It operates on a colorimetric method with a color card and sliding comparator, enabling users to visually match the color produced by the...

Tube test for the determination of BOD5 in Winkler-bottles. Precise rapid tests for all kind of water and waste water analysis. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: BODs - 2–3000 mg/L O2