Test Tube Racks

Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and...

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for...

Polypropylene Co-Polymer rack is lightweight, stackable and autoclavable. Rack comes flat and is folded and snapped into place for use. Rack remains collapsible for flat storage when not in use and measures 246 x 104 x 64 mm when assembled. Lightweight, stackable, and autoclavable. Collapsible to...

Sturdy, economical, and convenient racks for samples stored in vials. Autoclavabale at 120°C for 20 minutes. Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom.

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for...

This pegboard is made of type 304 stainless steel with 1/2" diameter, 6" long white polypropylene pegs. Pegboard is 30" tall and is furnished with a 4" wide stainless steel drip trough and clear plastic drain tube.

Top shelf height is 41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates have hand...

Optimize your workflows through user-friendly handling of clearly arranged samples. Eppendorf Tube Racks and Eppendorf Cuvette Racks are ideal for sample processing, transport, and short- to mid-term storage of samples. Well Organized - The Eppendorf Tube Racks and Eppendorf Cuvette Rack Benchtop...

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work...

Drip Trough, Stainless Steel Our drip troughs are constructed of stainless-steel, 20-gauge material, Type 304 stainless steel, #4 finish. The 3/4" mounting flange allows for easy installation on the underside of an acrylic or epoxy pegboard.

For labs using cycle strips, 8 or 12 tube strips or large quantities of individual 0.2 mL PCR tubes Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8...

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 13/16? (20.6mm) Tube Size: 18mm Spacing: 6x12 Holds 72 Tubes Dimensions: 10" X 5" X 3" Minimum Requirement: 5...

For Denville 81 & 100 Hinged place polypropylene cryo vial boxes, R8110 and R8310 series Metal Freezer Storage Racks are constructed of high-quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left handed doors. Our extensive product range will...

Dimensions: 68mm x 35mm.

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 1/16? (26.9mm) Tube Size: 25mm Spacing: 4x10 Holds 40 Tubes Dimensions: 11 1/2" X 4 3/4" X 2 3/8" Minimum...

20-well acrylic rack houses all major brands of 5mL tubes including both the original   Argos 5mL, as well as the new CapSafe™ (secure locking) version The tubes sit upright in this sleek design, and are supported at two levels in the rack The crystal clear color of the rack allows...

Designed to hold the most popular brands of Blood Bags, Bone Marrow, Stem Cell, Cord Blood and Plasma Bags •    Canister frames are constructed with lightweight Aluminum and include handles

Will not rust or deteriorate in water baths or CO2 atmospheres. Specifications: Stainless Steel Material Each Opening Rack 9/16? (14.3mm) Tube Size: 13mm Spacing: 4x10 Holds 40 Tubes Dimensions: 6 1/2" X 2 3/4" X 2" Minimum Requirement: 5 Each

Corning CoolRack thermo-conductive centrifuge tube modules eliminate variability which originates from tubes placed directly into ice, dry ice, alcohol baths, water baths and other temperature sources. Place the CoolRack module directly onto a temperature source between -196°C to >100°C...

Upright Freezer Drawer Rack for 96 deep well plates, 7 x 5 capacity 35 plates 25 x 10 1/8 x 5 7/16" (L x H x W)

Stainless steel rack for holding hot COD vials or test tubes prior to reading. Fit Hach COD vials and Test 'N Tube vials. Vials not inlcuded. Hach products are intended for sale/shipment within the US only. International customers should contact their local Hach distributor to place orders for...

For High Volume Work High quality epoxy-coated wire racks in convenient extra-long sizes for volume test tube work. Epoxy coated steel wire is chemical and corrosion resistant Steam autoclavable at 121°C (250°F)