Lab Clamps, Stands & Supports

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and...

Set includes retort base, rod, support ring and 4-pronged cork-lined clamp and bosshead Upgraded design now includes a two-piece stainless steel rod that effortlessly screws together, ensuring easy setup and enabling more compact storage when not in use The 8"L x 5"W base weighs 1.75lbs, providing...

Manufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2"(13mm) in diameter.

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with...

Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

Nylon Apparatus Flange Vertical Base Plate Corrosion-resistant; they will not corrode or rust Accommodates (1/2") rod Locked with 14"-20 hex screws

303 stainless steel support rods, 13mm (1/2") O.D. for use in place of aluminum or fiberglass. For use with all standard laboratory connectors.

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp...

Steel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels.

This cast-aluminum double burette clamp can attach to a support stand and hold up to two burettes securely. It has rubber grips to improve the grip on the burettes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to the State of...

Cast iron bases with gray enamel finish. The base is 3mm thick with a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the...

Solid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.

Sturdy Tripods featuring adjustable openings through the use of detachable rings.

Lab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole...

The Chemglass standard taper joint clamp is mainly used for supporting flasks, beakers or burettes while conducting experiments. It is made of sturdy PTFE material which ensures durability and long lasting usage. It is color coded for easy identification.

Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.

Made of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.

Snap-N-Lock Clamps are custom-made clamps created to accommodate various sized bottles. These clamps are sold individually and are used with Snap-N-Lock shafts. To use, insert a bottle into the bottom plate, then lock the clamp in place with the easy-to-use lever. Lastly, snap the clamp onto the lid...

Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest fume hoods. Clamps...

S-Connector Clamp is ideal for constructing lab-frames or other supports requiring the connection of two perpendicular rods. Clamp connects two 13 mm (0.51") rods at a 90° angle and features separate adjustment screws for each rod location. Lab Frame Foot Stainless steel electro-polished...

Able to adapt to multiple brands of rod mount skeletons Tube Inner Diameter = 12.5mm Cast Iron Heavy Base Heavy Duty Casters Tired of skeleton stands breaking? Tipping Over? Difficult to move? This is the skeleton stand for you. This heavy duty skeleton holder was designed to hold multiple brands of...

Joint Spring, Stainless Steel, Synthware, Coil Length: 6.35, 25.0 and 32.0mm available.