Select up to 3 products
QUANTOFIX Peroxide 100 semi-quantitative test strips for the determination of hydrogen peroxide (H 2 O 2 ) and peroxides in solutions. Measuring range: 0-1-3-10-30-100 mg/L H2O2
Hardness is a measure of the mineral content of water. Calcium and magnesium are the most common minerals that contribute to hardness. Hard water causes scaling in boilers and other industrial equipment, and diminishes the effectiveness of soaps and detergents. The EDTA Method (Total) References:...
Sulfite is not usually present in surface waters. If sulfite is discharged in effluents or from domestic wastewaters, it readily oxidizes to form sulfate. Sodium sulfite is the most common form of sulfite and is an excellent reducing agent with applications as an oxygen scavenger. Sulfite...
QUANTOFIX Cobalt test strips for rapid and easy analysis of Cobalt directly on-site. Measuring range: 0-10-25-50-100-250- 500-1000 mg/L Co2+
Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...
Tube test for the determination of Formaldehyde. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Formaldehyde - 0.20–10.00 mg/L
Tube test for the determination of Organic acids. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Organic acids - 0.5–50.0 mmol/L CH3COOH , Organic acids - 30–3000 mg/L CH3COOH
Ozone is a strong oxidizing agent and is used as an alternative to chlorine as a biocide in the disinfection of drinking water. Ozone is used to remove odor, decolorize, and to control algae and other aquatic growths. Ozone is also used in various disinfectant and sterilization processes in the food...
Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer
The Vent Filter is engineered to provide effective filtration for maintaining clean air flow within laboratory settings. It is constructed to trap particles and contaminants, ensuring a sterile environment for sensitive applications. The filter is durable and easy to install, making it suitable for...
The test vessels are suitable for MColortestTM and MQuant™ tests. Storage class: 10 - 13 Other liquids and solids
Tube test for the determination of total Kjeldahl Nitrogen (TKN). Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Kjeldahl-Nitrogen - 1.00–16.0 mg/L TKN
Tube test for the determination of Nitrite. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Nitrite -0.1–4.0 mg/L NO2-N, Nitrite - 0.3–13.0 mg/L NO2?
Method: colorimetric with test strips MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +2°C to +8°C. The product quality of milk depends heavily on successful pasteurization. To verify this, the lactoperoxidase activity must be measured regularly. The...
Tube test for the determination of ortho- and total Phosphate. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Phosphate (ortho) - 0.5–15.0 mg/L PO4³? , Phosphate (ortho) -...
Tube test for the determination of Potassium. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Potassium - 2–50 mg/L K?
Insta-Test Analytic Phosphate Test Strips by LaMotte provide a simple and effective method for measuring phosphate levels in water samples. These strips offer quick results, making them suitable for on-site testing and monitoring. Their compact design allows for easy storage and transport. They are...
Method: colorimetric with test strips 200 - 400 - 800 - 1200 - 1600 mg/l SO4 2- MQuant™ Storage class: 10 - 13 Other liquids and solids Storage Store: at +15°C to +25°C. The sulfate test can be used to give a rapid estimation of the sulphate ion content of drinking and...
This kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO2
This Spectroquant Sulfite Test provides an efficient solution for detecting sulfite levels in water through photometric analysis. Its straightforward procedure allows for quick and accurate assessments, making it suitable for various laboratory and field applications. The test ensures high...
VISOCOLOR Powder Pillows Silica HR reagent set for photometric determination of Silica in the high range. Ideal for boiler feed water analysis of low to medium pressure boilers. Measuring range: 2-210 mg/L SiO2 Set of Molybdate-, Citirc acid- and Acid reagent
UN Number: UN1830
This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education