Gas Chromatography Columns

Gas Chromatography Columns

Products (255)

Compare Tool

Select up to 3 products

  • Rtx-2887 Column (fused silica)

    nonpolar phase; Crossbond 100% dimethyl polysiloxane—for simulated distillation The Rtx-2887 column's stationary phase, column dimensions, and film thickness have been optimized to exceed the resolution and skewing factor requirements specified in ASTM Method D2887. Each column is...

  • Porous Polymer Columns

    Restek offers a full range of porous polymers, including HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvents.

  • HP-PAS-5 25m, 0.32mm, 0.52um

    Agilent Technologies

    Non-polar Specifically designed and processed for the analysis of organochlorine pesticides ECD tested to assure minimal pesticide breakdown and low ECD bleed Bonded and cross-linked Solvent rinsable Similar Phases: DB-5, Ultra-2, SPB-5, CP-Sil 8CB, RSL-200, Rtx-5, BP-5, CB-5, OV-5, 007-2 (MPS-5),...

  • DB-1301

    Agilent Technologies

    (6%-Cyanopropyl-phenyl) methylpolysiloxane Equivalent to USP Phase G43 Low/midpolarity Bonded and cross-linked Exact replacement of HP-1301 Solvent rinsable Similar Phases: Rtx-1301, PE-1301 Agilent Technologies products are intended for sale/shipment within the US only. International customers...

  • SUPELCOWAX® 10 Capillary GC Columns

    SUPELCOWAX® 10 Capillary GC Column may be used for the analysis of milk fat in order to demonstrate its health benefits. It may also be used for high-resolution separation of polychlorinated biphenyls by comprehensive two-dimensional gas chromatography. Application: This column is based on one...

  • DB-XLB

    Agilent Technologies

    Exceptionally low bleed Low polarity Extended temperature limit of 340°/360°C Exhibits inertness to active compounds Suitable for confirmational analysis Excellent for pesticides, herbicides, PCBs and PAHs Useful for GC/MS MSD testing and certification available Bonded and cross-linked...

  • DB-624

    Agilent Technologies

    GC capillary columns are typically wound on 7 inch cages that fit into standard-sized GCs like the 6890. The 6850 GC has a smaller oven which requires the use of columns wound on a smaller cage diameter. Specifically designed for the analysis of volatile priority pollutants No cryogenics needed for...

  • Siltek-Deactivated Guard/Retention Gap Columns/Transfer Lines (fused silica)

    Tested with a comprehensive test mix, to ensure high inertness Revolutionary deactivation process for superior inertness Analyze active samples accurately; ideal for chlorinated pesticide analysis (reduces endrin breakdown to less than 1%) Maximum temperature: 380°C

  • DB-ALC1 And DB-ALC2

    Agilent Technologies

    Meets EN14110 standard Reliable blood alcohol analysis Optimized primary and confirmation column pair for U.S. blood alcohol analysis Faster GC run times Improved resolution of key ethanol/acetone peaks Available in 0.32 and 0.53 mm ID Bonded and cross-linked Similar Phases: Rtx-BAC1, Rtx-BAC2...

  • OPTIMA® 5 Amine Capillary Columns

    OPTIMA® 5 Amine GC capillary columns for amine separation Features Especially deactivated for the analysis of polyfunctional amines such as ethanol­amines, amino-functionalized diols and similar compounds, which are important base materials in industrial chemistry, and show strong tailing on...

  • Metal Packed GC Column (General Configuration) phase none, matrix 40/60 Carboxen-1000 support

    Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and...

  • DB-5ms

    Agilent Technologies

    Phenyl Arylene polymer virtually equivalent to a (5%-Phenyl)-methylpolysiloxane Non-polar Very low bleed, suitable for GC/MS Exhibits inertness to active compounds Temperature limits are -60° to 325°/350°C Improved signal-to-noise ration for increased sensitivity and mass spectral...

  • Metal Packed GC Column (fits Agilent, Configuration "A")

    An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column fits Agilent 5880, 5890, 6890, 7820, and 7890 (configuration A, on-column injection, all detectors except TCD). In packed columns, the carrier gas percolates through...

  • Chromatography Reservoirs with Standard Taper Joints

    Reservoirs for use with CG-1188 and CG-1189 chromatography columns. Reservoir has a top 24/40 standard taper outer joint for use with CG-1191 flow control adapter and the listed size lower inner joint.

  • DX-1 And DX-4

    Agilent Technologies

    DX-1: 90% Dimethylpolysiloxane - 10% Polyethylene Glycol DX-4: 15% Dimethylpolysiloxane - 85% Polyethylene Glycol Because DX series GC columns are not bonded and cross-linked, we do not recommend solvent rinsing. Agilent Technologies products are intended for sale/shipment within the US only....

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W DB-1 is nonpolar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. Precision-engineered DB-1 is bonded, crosslinked and solvent rinsable, and is equivalent to USP phase G2. This product is only...

  • BP624 Capillary Columns

    Cyanopropylphenyl Polysiloxane US EPA 624 optimized column Designed for volatiles analysis Ideal for EPA624, SW-846 and 8240/8260 methods Ideal for USP G43 method Application Areas: EPA method 624, drinking water volatiles, chlorinated hydrocarbons, solvents Operating Temperature: 1.0-3.0µm...

  • DB-23

    Agilent Technologies

    50%-Cyanopropyl)-methylpolysiloxane High polarity Designed for separation of fatty acid methyl esters (FAMEs) Excellent resolution for cis- and trans-isomers Bonded and cross-linked Solvent rinsable Replaces HP-23 Close equivalent to USP Phase G5 Similar Phases: SP-2330, Rtx-2330, 007-23, AT-Silar,...

  • Chromatography Columns with Fritted Discs

    Similar to CG-1186 but with a sealed in COARSE porosity fritted disc to support column packing. Lower end of the column has a round bottom. Column is constructed using MEDIUM WALL TUBING.

  • Columns Capillary HP-88 100m, 0.25mm id, 0.2um

    (88%-cyanopropyl) aryl-polysiloxane 250/320°C upper temperature limits High Polarity Designed for separation of cis/trans fatty acid methyl esters Even better separation than DB-23 of cis-trans isomers Similar Phases: CP-Sil 88, SP-2560, SP-2340, SP-2330, BPX-70, BPX-90 Agilent Technologies...

  • Rtx-Wax Columns (fused silica)

    polar phase; Crossbond polyethylene glycol Rtx-Wax columns are the most inert and efficient PEG columns currently available. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures as high as 250°C. Selectivity is...

  • BPX35 Capillary Columns

    35% Phenyl Polysilphenylene-siloxane Mid polarity column Ideal for confirmational analysis Inert Equivalent to USP phase G42 High temperature Low bleed Pharmaceutical specialist Application Areas: Environmental analyses, pesticides/herbicides, drugs of abuse, pharmaceuticals, polynuclear aromatic...

  • HT5 Capillary Columns

    5% Phenyl (equiv.) Polycarborane-siloxane Ultra High temperature column range Unique phase - no equivalent phases Ideal for simulated distillation applications (petroleum industry) Application Areas: Simulated distillation, general hydrocarbon profiles, pesticides/herbicides, GC/MS applications...

  • Elite 624 capillary column 30m x 0.32mm, 1.80µm

    Temperature range -20°C to 240°C Equivalent to USP G43 phase

Compare Tool

Select up to 3 products