Ace Glass

Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C. From Ace Glass, comes a round-bottomed boiling flask, designed with meticulous precision for optimal performance in laboratory settings. Constructed from high-quality PTFE, this single neck flask offers outstanding...

Stirring shaft agitator combination available in either a solid, precision ground glass shaft or all PTFE knob type shaft with a PTFE snap-fit agitator designed to fit through 14/20 and 18/11 joints. Designed for use with our 5mm ID 9524 or 9527 bearings and flasks of 50ml and smaller.

Continuous reflux apparatus keeps solvents pure and free of oxygen. Compact, upright design allows multiple units to be assembled in small areas. Distillation column is 250mm long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert...

Screw caps and pouring rings for use with GL threaded bottles. For steam autoclaving, we recommend PBT (polybutylene theraphthalate) caps with a PTFE liner, -45 to 180 degrees C rated. Polypropylene is only rated to 140 degrees C. 316L stainless steel cap is for use with stainless steel laboratory...

Cylindrical, heavy wall reaction flask with extra thick flat, ground flange. Without constriction at top to facilitate introduction/removal of material and allow for ease of cleaning. Available in 1L to 4L capacities, flat bottom and round bottom, with

Double tube vacuum manifold with #15 o-ring joints at both ends. Available in either a 3 or 4 port configuration with 4mm bore glass double oblique stopcocks. The ports can be ordered in 14/20, 24/40 standard taper or #15 o-ring joints. The distance between ports is 210MM which allows for use of...

Offset adapter with outer joint top, inner joint bottom. Some include drip tip. Ace Glass's Offset Adapter is designed to provide flexibility in glass joint systems by allowing for offset connections. This adapter is made from superior glass material, ensuring it can withstand various chemical...

Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction...

PTFE banana shaped stir blades for 10mm OD button type stir shafts. 3mm thick blades have a number of perforations and are designed to closely fit various sizes of round bottom flasks. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.

Adapter with bent hose connection top and standard taper inner bottom joint. This connecting hose adapter is an essential tool in various lab applications where secure and efficient fluid or gas transfer is required. It is designed to fit seamlessly between two pieces of glassware, ensuring a...

Sparger tube with Ace fritted bottom available in various porosities. Top has either 0-3 or 0-5 Easy Action Stopcock. The 90 degree side arm is available with a glass hose connection or a #7 Ace-Thred which promotes the use of our 5853-06 Ace-Safe conn

Large distillation columns, jacketed with internal expansion bellows. Outer jacket baked out and evacutaed to 10-6 Torr. Columns are silvered internally with observation stripe. All columns are supplied with the proper number of bellows to withstand the 180 Deg C temperature differential at all...

No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include

Fernbach style culture flask with long style straight neck for either plastic or stainless steel closures, see Ace 3917 and 3918 product families. The bottom of the flask is triple baffled to achieve maximim oxygen transfer to the culture medium. Caution! Do not place on direct heat source.

A front-seal, solid plug for sealing column ends. Supplied with one FETFE o-ring. The Plug, available in Nylon, HDPE, or PTFE, is designed for secure sealing in a variety of laboratory applications. It features a front seal design that ensures a tight fit, preventing leaks and contamination. These...

Graduated addition funnel featuring standard taper joints,graduations in both ascending and descending volume,protected drip tip and a glass stopcock. Graduations are calibrated from the stopcock.

Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable...

Coiled condensing tube, with 24/40 inner and outer joint at bottom and top. Available in various lengths with hose barbs or Ace-Safe connectors.

This bushing adapter has a male Ace-Thred connection at bottom and a female NPT thread drilled into the center of the top of the bushing. The top FNPT connection matches male Swagelok fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is...

Designed to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask. Supplied with PTFE gasket to prevent scratching top of bearing and acts as dust cover. Available in either Glass-filled PTFE or 316...

With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

Bushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.

Process pipe reducing tee. Designed for high-performance and reliable operation, this Reducing Tee for process piping offers a versatile solution for complex pipeline systems. Constructed with precision, it allows for secure connections between three pipes of differing diameters. This component is...

Reflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.