Ace Glass

Complete, two-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and...

With long neck and standard taper 24/40 outer joint. Ace Glass's Flask, Single Neck, is a versatile piece of laboratory equipment used for boiling and mixing chemicals. It is constructed from durable glass, which can withstand high temperatures and chemical exposure. The single neck design allows...

Side operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision

Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

Fabricated from 18-8 type Stainless Steel No. 303 free machining. Inside diameter the same as our glass joints, 7655, and are fully interchangeable. Can also be supplied from other metals, made to order. Shanks are machined for thread sizes listed, and are available not threaded or machined with NPT...

Plain type, 10mm I.D. with indents for supporting glass beads or other packing.

Used for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.

Straight reducing connector tube, with ends of different size Ideal for a variety of laboratory applications, this connecting tube is a versatile addition to any scientific workspace. It is designed with precision and durability in mind, ensuring reliable and consistent performance. Its high-quality...

Side operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore housing.This offers a unique flexibility...

Ace Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breaking under...

Jacketed, adjustable bed chromatographic column used for recycling, ascending descending applications. Completely jacketed for better temperature uniformity with single bushing at each end allowing for quick and easy adjustment of the PTFE plunger. the 25-50 micron porous glass disc gives rapid flow...

Vacuum instrument,digital,0.001 - 760 torr,LED display,²thermocouple vacuum gauge tube,100-230v 50/60Hz,CE rated²Optional features available:²2C: The ability to control an external device via 2 SPDT²external connections at user specified setpoints.²5V5T: Provides a voltage output proportional to...

Cylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE or metering valve stopcock plug.

Simple absorption chromatography column for rapid preparative separations with moderate resolution. Allows separations of samples from 0.01 to 10.0g in 10-15 minutes. Column and reservoir, only, are Epoxy Coated. Reservoir connects between column and flow control adap-ter. Joints on column,...

A high velocity impinger (Ref. AGI-30) which passes 12.0 to 13.0L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary...

Robust and reliable, this filtering flask from Ace Glass is designed to withstand demanding laboratory conditions. The heavy-wall construction ensures durability, while the side hose connection facilitates efficient filtration processes. Suitable for both chemistry and biology labs, this flask...

Nylon or PTFE bushings for use with any #7 Ace-Thred. Solid bushings are not stoppers (see 5803,5846) but are intended for drilling custom diameter holes. Ferrule designed bushings can be used with either 11710-03 PTFE ferrule for 1/8 inch OD tubes, code -05 for 3/16 inch OD tubes or code -07 for...

Cylindrical form, silvered and evacuated. Furnished with an aluminum base. Exterior, including base, is coated with a tough, resilient, baked-on plastic which does not rupture if flask breaks. Intended for use with liquid nitrogen. Performance is not g

PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone....

Large volumetric flask with joint and flat bottom. Available with or without graduation mark. See 8255-18 and 8255-20 for 34/28 and 40/35 stoppers.

Adapter, o-ring joint to size E hose connection, fits 3/8"-7/16" id tubing, fetfe o-ring included Dealing with complex lab setups can be challenging, especially when it involves a reliable connection between glass systems and hoses. To address this, the Adapter, O-Ring Joint to Hose Connection, is...

Drying tube adapter with inner joint and rubber stopper. This adapter for drying tube is an essential piece of glassware for any lab conducting chemical reactions sensitive to moisture. It features a robust construction to withstand various chemical reactions, and its design ensures efficient...

Designed by Dr. H.R. Krouse, University of Calgary, for use with 7408 in H2O18/H2O16 determinations. CO2 from the equilibration flask is transferred to the sample tube for isotopic analysis. Unit consists of PTFE plug with FETFE O-Ring and glass vessel with 5mL tube at bottom.

Bulb type, approximately one bulb per 50 mm, with various joint sizes at bottom and top. Available with hose barbs or Ace-Safe connectors.,/p>