Ace Glass

Specially engineered to fit standard taper joints and tubes. Manufactured under white room conditions for extreme cleanliness. Made of a more dense rubber, low extractables and a better fit (50% to 80% on joints) these septa are much less likely to fail in the presence of solvents.

Superior Electric Powerstat & reg; with Ace Warning Glow variable output transformer. Autotransformers have one wire continuous from input to load. If this wire is incorrectly connected to the "hot" side of the service, a 110-120v potential exists between it and the ground. Reversing...

Transition adapter to convert a spherical ball or socket 2 joint to a standard taper inner joint. The Spherical to Standard Taper Adapter allows for the integration of spherical joints with standard taper glassware. It provides a reliable connection, expanding the versatility of your laboratory...

Columns are fully jacketed including internally threaded ends for circulation of heat exchange media. A wide choice of upper and lower end pieces can be fitted to columns using 5837, 5838, 5840, 5841, 5842 and 5843 fittings. Available in variety of diameters and lengths. Not for use with 5819...

Polished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a...

Filter discs, available in glass fiber or granular type. Glass fiber filter discs last longer, are more abrasion resistant, and are superior in performance than granular type discs. Granular discs for analytical and general bacteria filtration are avai

Twin adapter features two Ace-Thred top openings and a standard taper inner joint bottom. With the supplied nylon bushings, two tubes or a thermometer and bleed tube can be inserted through the same joint. The 24/25 medium length joint is compatible wi

A general line of adapters supplied with spherical joints to be used in assemblies for distillation, extraction, or your own requirements. On code -30, please specify capacity and catalog number of item into which the adapter is going to be placed. The

Three-way high vacuum oblique bore stopcock with liquid seal. The solid plug is bored to permit evacuation of the lower chamber and prevents leakage through the bottom.

Coated to neck with PVC safety coating to reduce potential breakage and exposure to laboratory personnel when handling hazardous material. Carboy style bottles with sloping shoulders. Necks are tooled for uniform fit with stoppers. Uses No. 12 stopper

Stainless Steel Quick Release clamp for use with two-piece Pressure Reaction Flasks and Heads with Duran flanges. Available with or without rod for clamping to support frame. Note: Ensure proper bottom support for your reactor, the clamp is only recommended for stabilization, not support.

Outer joint at angle of 105 degree. Hose connection opposite top joint. Stem below joint, 30mm. The Adapter, Vacuum Take-off, Short Stem is a specialized glass component designed for efficient vacuum take-off in laboratory setups. Its short stem facilitates easy integration with existing glassware...

Simple absorption column for rapid preparative separations with moderate resolution. Modified with a #25 Ace-Thred connector in place of 35/20 joints, for grease free connection. Internally threaded connector & Nylon bushing make a pressure-tight, O-Ring compression seal with glass stem on...

For solvents heavier than water. Used in the method of quantitative separation and determination of glycol mixture by azeotropic distillation described in Analytical Chemistry, Vol. 29, No.1, Page 100. Capacity is 121/2mL, graduated in 0.1mL. Joints are standard taper 24/40.

European style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit

Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.

Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with

With spiral condensing tube having both inlet and outlet connections at top, on same side. With joints. Length between joints is approximately 80-90 mm longer than the stated coil length. Available with PTFE clad bottom joint.

Ring-style hose connections for use with regular size condensers, etc. Codes -03 & -07 are on straight tubing; code -11 has a flare end. Sold in shelf-packs of 12 each.

Schlenk style flask for vacuum, NO-AIR or gas applications. Can be used for storage or reactions. Top is either a no.15 o-ring or outer standard taper joints. Side arm has either a 0-3 inlet valve or a 2mm or a 4mm glass stopcock.

A turbine type agitator, available for 19mm and 28mm shafts. 19mm six blade agitators are open in the center to allow custom positioning on drilled type or knob type 8076, 8078 & 8079 shafts. 28mm four blade agitators are supplied with a PTFE nut & bolt set for securing to 8080 shafts. Shaft is not...

Two neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.

Glass purge adapters for use with popular brands of rotary evaporators. Top has 35/25 socket joint for joining with the trap or condenser. The bottom has a 35/25 ball joint for connecting to the receiver flask. The middle or purge tube has either a 2mm PTFE stopcock or a 2mm valve to allow for...

Glass Manifold with #15 Ace-Thred at either end to allow switching vacuum connection to left or right side. Supplied with three or five 0 - 4mm High Vacuum, Easy Action Stopcocks for sample ports. Plugs are PTFE with Nylon hooded handles and FETFE O-Rings. Ultimate vacuum of 10 - 7 can be realized...