Ace Glass

Space saving, Elliptical shaped, bump trap. For use in Rotary Evaps between the steam tube and the evaporator flask. Prevents fluid from being drawn into the condenser. Shape allows for the same effect as standard traps but with less space between the flask and evaporator tube. This allows for use...

Vacuum trap with joint to facilitate cleaning. Available modified with top tube bent in line with side tube, but in opposite direction.

Apparatus designed by James Velasco of U.S.D.A. and published in the J.O.A.C., Vol. 46, No. 5, Pages 252-255. Newly designed flask increases the efficiency and standardization of neutral oil determination by: permitting automatic transfer of weighed crude oil samples onto alumina columns; converting...

Standard collecting tube with glass stopcock and capillary tubing for connecting to rubber tubing and syringe sampling port with septum. Available with either glass or 1:5 taper PTFE stopcock plugs. For replacement stopcock plugs, see 8223 (PTFE), 8224 (glass).

Flat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

Fritted filter disks for Ace Membrane Filtration Apparatus. Special tight outside diameter and tolerance to fit 3702-10 and 3700-10 filter adapters.

High vacuum straight thru stopcock available with several types of Easy Action plugs including bakeable PTFE, PTFE stem with glass filled PTFE threads, and glass with Nylon handle, for allowing smooth adjustment. A variety of replacement items are avai

With standard taper joint at top. Capacity 100mL, in 1mL subdivisions. The Distilling Receiver by Ace Glass is a vacuum-type apparatus designed to facilitate efficient distillation processes. Constructed from high-quality glass, it ensures chemical resistance and durability. This equipment is vital...

Trypsinizing flask with beaded neck and long side baffles. Ideal for converting homogenous tissue samples into cell suspensions by digestion of connective tissue. Heavy beaded neck accepts either cotton plugs or stoppers. The extra-deep baffles enhance vigorous agitation.

New design gas washing bottle with the convenience of Ace-Threds. Center washing tube fits into borosilicate glass bottle via #25 Ace-Thred with nylon bushing and FETFE o-ring. Washing tube has #7 Ace-Safe inlet/outlet ports with 1/4-in hose connection

A simple, all PTFE septum injector. Allows direct, on-column injection to the center of the filter disc at top of column without stopping the solvent flow through the 1/4"-28 female side thread (with or without helicoil). Locknut design provides leaktight seal without o-rings. You can order the...

Smith Buret for dispensing precise quantities of liquids. The wide base adds stability when placed on a balance pan. Complete apparatus consists of a flask, buret and cap stopper. With a 19/10 cap type stopper joint as illustrated, and a standard taper

Firestone splash guard adapter with medium length joints that will accept full length joints. Internal porosity A (147-174 micron) fritted disc that assures no carry-over in the event of pot splash-up. Overall length is kept to a minimum to positively

Erlenmeyer flask, wide mouth with beaded lip to resist chipping. 10 and 25mL capacity, used to carry out reactions or to hold items such as 9581 Craig Tube in microscale work.

Replacement stopcock plugs with inlet feeds for rotary evaporators. Codes -08, -10 for Buchi assemblies and -20 for Heidolph 4000 series. All plugs are 19/38.

Trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep,...

Similar to 7745 but with overflow line to allow excess solvent to return to boiling flask. Used to determine the water content in petroleum and bituminous material. Similar to ASTM Type, except supplied with joints and stopcock to empty measuring tube during the determination. The 10mL size is...

For coupling threaded columns together or to end fittings with single O-Ring seal for leak tight engagement with hand pressure and no sig-nificant size reduction in I.D. One end threaded for the next smallest diameter. Size listed refers to inside diameter of threads. Supplied with two FETFE...

Angled offset adapter with outer joint on top and inner joint on bottom. For use with heads having 10 degree side necks, transitioning to 90 degrees.

Glass powder funnel used for the addition of material to containers with standard taper joints. See Ace 7242 family for funnels without joints.

Fully flexible drive shaft facilitates isolation of the stirrer motor from the reactor. Complete units, code -30 (91.4cm) and code -32 (152.4cm), designed for use with 8mm (5/16in) motor shaft. Purchase the optional code -27 adapter for motors with 9.5mm (3/8in) shafts. Reactor end consists of a...

A vertical, compact screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore

Medium length standard taper stoppers, size 7/15, 10/18 and 12/18 are solid, all others are hollow.

Standard taper joint at top and spherical joint at bottom. Ensure seamless transformation between different sizes of laboratory glassware with our reducing and enlarging adapter. This robust adapter is specifically designed to bridge gaps between apparatus of varying joint sizes, offering a secure...