Ace Glass

Specific gravity bottle, weld, unadjusted for calibration in the lab. Provided with cap to reduce evaporation losses when using volatile liquids. Stopper is 10/18 and cap 14/20 outer.

Microscale, heavy wall reaction vial with standard taper outer joint externally threaded at opening to allow an o-ring cap seal connection with mating male joints. This connection type eliminates the need for clamps while offering the positive, leak-tight seal of ground glass joints. Vials include...

Designed for the extracting of liquids with ether. The dispersion of the ether is accomplished by the use of an ACE fritted disc, Por. B (70-100m), which is attached to the base of the funnel tube. With 24/40 and 40/50 joints. Available in the following sizes.

Clamp is designed to fit 4 inch conical flanges, allowing the top half to be removed without disturing the lower half. Clamp features and extension arm (1/2 x 8 inch) suitable for attachment to an appropriate support stand or lab frame. Silicone liner will withstand temperatures up to 500ºdegF.

Bubbler with either fritted tip or plain orifice stopper. Bottle has 24/40 joint and 10 cm tube below bulge. Stopper has 12/5 outer joint on inlet arm and 12/5 inner on outlet arm. Fritted tip is porosity C (25-50m). Orifice tip is 1.5mm capillary with end tapered. Approximate capacity, with stopper...

Weighted, all transparent safety shield for laboratory worker protection. Polycarbonate shield is 4.7mm(3/16") thick. Three-sided construction provides stability and protects personnel from front and sides. Heavy steel perimeter base is 25mm x 48mm (1" x 1 1/2"), coated with green...

Glass standard taper and spherical joint adapters featuring a right angle ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

Automatic, adjustable pressure release valve for safer operation of pilot plant or other assemblies where the pressure is of great concern. The tension on the stainless steel spring determines the amount of pressure needed to force the lower piece open. With the spring supplied, the range is 15-50...

Ace-Thred to standard taper adapter designed specifically for securing a thermocouple via a nylon bushing and PTFE ferrule.

Polypropylene tubing used to make connection between pressure source and 12517 Quick disconnect on side of Pressure Manifold and between other side of manifold the Pressure Reactor. Sold in 100' coil.

Ensure your scientific samples maintain their integrity with this Septa, Flat, PTFE Faced. Made of durable materials, it provides a secure seal to prevent leaks and contamination, thereby enhancing the overall efficiency of your experiments. The PTFE facing adds a chemically inert and heat-resistant...

Diameter of sintered glass filter disc is 18mm. Measures 40mm from disc to bottom of joint. All porosities of a given size are priced the same. Volume approximately 10 mL. Hose connection is size A.

A liquid-liquid extractor for use with lighter or heavier-than-water extracting solvents. Overflow and boil-up tube uses Ace-Thred Connections, thus allowing easy removal for cleaning to reduce cross contamination among samples. Complete consists of:Extractor Body, (approx.1.3L capacity), Dispersion...

Consisting of rubber bulb and polyethylene release tube. For use with (Thomas Nos. 1169W70-76). The Rubber Bulb & Release Tube from Ace Glass is crafted to enhance the precision and ease of use of automatic burets. Made from high-quality rubber, it ensures a firm grip and long-lasting performance....

Drying tubes available with beaded or standard taper tops and standard taper bottom. Ensure the protection of your scientific experiments from atmospheric moisture with this high-quality drying tube. It is crafted with precision to provide a secure barrier against unwanted moisture ingress, making...

With short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.

Straight sparger tube with Ace fritted bottom available in various porosities. Top is either a 1/2"ID hose connection or a #7 Ace-Thred which allows the use of our 5853-06 Ace-Safe connector. The 10MM OD spargers will fit inside #11 Ace-Threds, the 14M

Outside diameter of tube 8mm, total length of tube 150mm.

Used for sampling air volumes at low jet velocity. Bottle joint is 24/40. Stopper uses #7 Ace-Safe removable hose connections for easy connect/disconnect. Impinger nozzle calibrated to deliver 0.09 to 0.11 CFM at 30.5cm (12") H2O vacuum. Bubbler nozzle has sintered glass filter, porosity A...

With completely adjustable 7mm inner tube. Tube has a pulled tip and is secured by a #7 Ace- Thred. Volume approximately 40mL. Tapered bottom of vessel allows for use with small volumes. Nylon bushing supplied with FETFE O-Ring. Available modified with #7 Ace-Threds on inlet/outlet for use with...

Plain, open top, chromatographic column, with porosity B (70 - 100 m) fritted disc sealed in.

With standard taper 24/40 joints. Length in centimeters refers to the effective length of the column as measured from the lowest to the highest indent of the column.

Accurate to within plus or minus 3%. The McLeod gauge is the most convenient and economical instrument for measuring low pressures from 1 micron up. The ACE McLeod gauge is offered in four ranges, so that it is possible to accurately measure any pressures between 1 micron and the highest reading on...

Schlenk filter tube with an integral glass filter disc at the tube's mid-line and featuring inner joints at top and bottom.