Ace Glass

Fully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.

Ace Glass pressure tubes are the premier glass pressure tubes in the world, rated at 150 psig at 120 degrees C. Featuring a #7 Ace-Thred sample port, these tubes offer the convenience of sampling while remaining connected to the researcher's apparatus. Due to varying conditions, Ace cannot guarantee...

Three segment, anodized aluminum, heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09...

Nephelometer type culture flask with angled cuvette side arm and side clean-out port. Flasks have three outside bottom baffles to promote mixing and oxygen transfer to media. Flasks come with 18-415 side port phenolic cap and 38-430 phenolic top cap. The side arm fits all standard Nephelometers and...

Adapter, 15mm o-ring joint to blank cap. The Adapter Cap from Ace Glass is engineered to provide a reliable seal between glass joints, ensuring efficient operation in laboratory experiments. Made from premium-grade glass, it offers excellent chemical resistance and durability under various...

Fernbach style culture flask with mide-mouth neck and screw cap closure. Supplied with GL45 PP cap. Flask is triple baffled on outside edges for maximum oxygen transfer to the media. Caution! Do not place on direct heat source.

Chlorofluorocarbon grease for use at speeds up to 6000 r.p.m. with ACE standard glass assemblies. Use 8040 water-cooled type bearing for long-time stirring (over one hour). Below one hour, 8038 type may be used at 1500 r.p.m.; eight hours at 1000 r.p.m. High chemical inertness unaffected by strong...

With an ACE fritted disc sealed in. Can be used in any standard Soxhlet extraction apparatus. The sizes below correspond to the size specifications of extraction bodies and will fit those units. Available in porosities A, B, C, D and E. All porosities of a given size are priced the same. Height...

Schlenk style reaction tube for vacuum and No-Air applications. Available in many capacities, joint sizes and side arm configurations including a glass stopcock, 0-3 inlet valve or a 0-4 Hi-Vac valve.

Bulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.

3-way stopcock with T-bored solid glass plug. See Ace 8228 family for replacement plugs. The Three-Way T-Bore Stopcock allows for versatile fluid direction in laboratory applications. Its design facilitates easy switching between different flow paths, enhancing the flexibility of fluid management....

Vacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.

Used for limit test for arsenic as described in European Pharmacopeia, 1997, page 51. Complete consists of 125mL conical flask with 24/40 joint, a capillary chimney with a pulled tip below 24/40 joint at bottom, #5 O-Ring joint at top with hooks for 3/4" springs, and an adapter tube with #5 O-Ring...

Shake style culture flask with long style straight neck, accomodates either plastic or stainless steel closures. Without baffles.

With full length standard taper joints, single scale metric graduations. Can be used for distilling receivers. Stoppers not included.

A rapid, efficient and foolproof Purge Valve for 100% replacement of air in reaction vessels with any desired gas (N2, H2, Ar, Cl2, etc.). No mercury used, no reducing valve needed on gas source, no high vacuum source necessary. No need to watch manometers, hand control gas flow, or install warning...

Internal threaded bottom drip adapter with or without flow regulator valve. 1/4"-28 or NPT internal threads. Supplied with packing support and o-ring. For use with all Ace-Thred chromatography columns.

Stopcock adapter, inner joint bottom, #7 top, stopcock side arm with PTFE plug and hose connection end. Supplied bushing and FETFE o-ring allows compression seal with thermometers, bleed tubes, etc. Will accomodate thermometers or tubes up to 7mm OD. F

Round bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.

Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

Oil baths heated by Instatherm®, an integral noble metal alloy fused permanently to the glass & covered with a tough silicone rubber treated glass cloth insulation which serves as a thermal barrier as well as protection against physical shock. Rapid heat response - low thermal lag. For...

With tooled neck for uniform stopper fit. Side hose connection is #11 Ace-Thred that accepts a PTFE Tubing Connector with silicone O-Ring and Nylon bushing to make an easier, safer, more convenient vacuum hose connection. Two connectors are available:

Same as 8751 except with six ring hose connections on inlet and outlet tubes. O.D. of smallest ring is 14mm; largest is 16mm.

Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15...