SP Wilmad-LabGlass
-
5mm Screw-Cap NMR Tubes
SP Wilmad-LabGlassCommonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.
-
Le Chatelier Specific Gravity Bottle
SP Wilmad-LabGlassUsed to determine the specific gravity/density of sand, cement and other fine materials, this borosilicate glass specific gravity bottle is developed from ASTM C 188 and ASTM E 694. The body holds approximately 250mL and the capacity of the oval bulb in the neck is 17mL. Volume below the bulb is…
-
Bruker SampleJet NMR Tubes
SP Wilmad-LabGlassAuthentic Bruker® SampleJet® cap without code, up to 600 MHz. Do not use with Ceramic spinners.
-
Ammonia Dissociation Buret
SP Wilmad-LabGlassGraduated from 10 to 90% in 1% subdivisions, this borosilicate glass buret is used to determine the degree of dissociation of ammonia during the nitriding of steel alloys. Buret is 100mL and reads the amount of ammonia absorbed. Stopcocks are glass and a Standard Taper 14/20 joint connects the…
-
Fat Extraction Flask, AOAC
SP Wilmad-LabGlassThese borosilicate glass extraction apparatus are used to measure the fat content in dairy and other food products. Reference AOAC 989.05 for fat in milk. Top is tooled to accept rubber stoppers (not included).
-
Laboratory Grade Cylindrical Dewar Flasks
SP Wilmad-LabGlassFor routine use. Furnished silvered, evacuated and with aluminum base. Not for transportation of Liquid Nitrogen. Properties Capacity mL: 1000 Inside Diameter Inches: 2-11/16 Inside Depth Inches: 11-7/8
-
Jacketed Beakers
SP Wilmad-LabGlassMade of borosilicate glass, these laboratory beakers are fully jacketed to allow temperature control over a wide range. They are similar to a standard Griffin Beaker, but do not have a pouring spout.
-
ProCulture® Shaker Flasks with Beaded Neck and Standard Baffles
SP Wilmad-LabGlassBeaded rim ensures a greater resistance to chipping Three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
Stainless Steel Micro Spatula
SP Wilmad-LabGlassGetting a tiny powder sample into any tube larger than 4mm OD should never be a struggle again. Unlike ordinary spatulas, WILMAD's Stainless Steel NMR Spatula fits into the most common NMR tubes. Add or remove samples easily (including freeze-dried); scoop samples with the round end or pry…
-
Class A Volumetric Flasks
SP Wilmad-LabGlassThese borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289.…
-
5mm O.D. Quick Pressure Valve (QPV) NMR Sample Tubes
SP Wilmad-LabGlassWilmad Quick Pressure Valve Sample Tubes are specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents. Due to the nature of glass, Extreme Caution should be…
-
Extra Large Soxhlet Extraction Apparatus
SP Wilmad-LabGlassThis borosilicate glass X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn…
-
4mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
5mm Bruker Spinner Turbine
SP Wilmad-LabGlassCauses less probe insert damage by better insert sample control Tachometer strip now with foil protection for improved life span Longer upper barrel stabilizer easily identified by 3mm yellow band Variable temperature operation from -150°C to +200°C Can be mixed with originals…
-
Class A Volumetric Serialized Flasks with Stopper
SP Wilmad-LabGlassGlass quality, calibration lines, inscription and appearance are maintained according to the former NBS circular 602. Flask has a marking spot in addition to a serial number. Calibrated to contain (TC) at 20°C. Supplied with stopper.
-
Plain Dissolution Test Vessel
SP Wilmad-LabGlassMade of borosilicate glass, these dissolution test vessels/flasks have smooth hemispherical bottoms, straight sides, and flat flanges. Reference: USP 23 (711)
-
Laboratory Grade Automatic Burets with Straight Stopcocks with PTFE Plugs
SP Wilmad-LabGlassThis inexpensive portable titration set features a 2mm straight stopcock with PTFE plug. The borosilicate glass buret is filled by pressure supplied by the rubber bulb. A small hole in the filling tube at the "O" line permits setting of the liquid level and excess titrant is returned to…
-
Pyrex® NMR Capillary Tubes
SP Wilmad-LabGlassWilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field
-
Cylindrical Jacketed/Indented Reaction Vessels, O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.
-
5mm O.D. Thin Walled Economy NMR Tubes
SP Wilmad-LabGlassDesigned for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…
-
Class A Volumetric Flasks, Heavy Duty, Wide Mouth, Glass Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…
-
Spinner Turbines for Agilent® Spectrometers
SP Wilmad-LabGlassLow cost alternative to the full VT version for sample changers Weight and susceptibility matched to originals Can be mixed with originals in sample changer operation Limited VT operation around ambient Does not jam at top of upper barrel during insert operation Tachometer strip now…
-
NMR Tubes for Bruker® MicroProbe and MicroCryoProbe
SP Wilmad-LabGlassTen times more precise in terms of camber and concentricity than capillary tubes. Ideal for Ultra-High Field (>600MHz) experiments Recommended for Bruker® MicroProbe and MicroCryoProbe Includes disposable cap
-
Tall Form Weighing Bottles with Flat Top Cap
SP Wilmad-LabGlassCaps can be used as weighing dishes External standard taper joint allows for sample transfer without seal interference Flat top permits stacking for increased desiccator capacity High form shape decreases bottle footprint Light weight for simple tare settings Manufactured from ASTM…
-
10mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
NMR/EPR Tube Caps
SP Wilmad-LabGlassOur PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability. They are recommended for experiments at high - ultra high field and those using Chloroform as the reference…
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
Stainless Steel McCarter Reaction Clamps
SP Wilmad-LabGlassUsed to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…
-
Rotor and Caps for Bruker® MAS Probe
SP Wilmad-LabGlassManufactured from the highest purity Zirconia, Wilmad MAS Rotors provide the ultimate solution for analysis of solid samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and…
-
X-Band Economy Brand EPR Suprasil® Tubes
SP Wilmad-LabGlassWilmad X-Band Economy Brand EPR Suprasil® tubes are manufactured from synthetic quartz which has 20 fold less paramagnetic impurities than naturally occurring quartz. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination …
-
Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…
-
Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads…