SP Wilmad-LabGlass Supplies

Three styles available for our NMR and EPR Tubes 1187C59 (820-A): Lightweight polypropylene rack maximizes your benchtop storage capacity and is virtually inert 1187C64 (WG-2442): Simple but useful this stainless steel NMR tube rack accommodates 12 tubes with a maximum OD of 5mm. Small footprint...

To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding process to...

Designed to monitor reactions from start to finish, the Wilmad-LabGlass Reaction Monitoring System is a two-chamber borosilicate glass NMR tube that allows for in-tube mixing. The system features an inner chamber with a Teflon® tip that when secured creates a positive seal separating solutions...

Ideal for cultures that require a large surface area to volume ratio Beaded rim ensures a greater resistance to chipping Available without baffles or with three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic marking spot...

After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks are...

Authentic Bruker® SampleJet® cap without code, up to 600 MHz. Do not use with Ceramic spinners.

Shigemi tube features a susceptbility matched bottom and plunger for each of the following solvents: CDCL3 CD3OD D2O DMSO-d6 This feature would effectively reduce the boundary gradients at the edges of the coil. Therefore, it is no longer critical to keep the general NMR sample rule as "sample...

To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding process to...

Our volumetric pippets are calibrated "to deliver" (TD) at 20°C, these borosilicate glass, color coded pipettes are fabricated to meet the requirements for accuracy, appearance, glass quality and calibration line accuracy. Reference: Volumetric, Class A ASTM E-969

Commonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.

Causes less probe insert damage by better insert sample control Tachometer strip now with foil protection for improved life span Longer upper barrel stabilizer easily identified by 3mm yellow band Variable temperature operation from -150°C to +200°C Can be mixed with originals during sample...

Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability. They are recommended for experiments at high - ultra high field and those using Chloroform as the reference...

Try our handy pocket NMR/EPR tube carrier; holds one 5mm O.D., 7 inch length NMR/EPR tube. Pack of 3 white holders. Features a pocket clip that keeps it secure. Made from unbreakable polymer material with a snap-on cap. Protection is provided for the sample and lab personnel during transport.

Designed for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA facility...

These borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.

Calibrated "to contain" at 20°C, these borosilicate glass moisture traps are used for the determination of water in various materials by distillation with an immiscible solvent. They consist of a full length Standard Taper inner joint for vapor tube connection to distilling flask and a...

This inexpensive portable titration set features a 2mm straight bore stopcock. The borosilicate glass buret is filled by pressure through a tube extending from the bottle up inside the graduated tube. A small hole in the filling tube at the "O" line permits setting of the liquid level and...

Calibrated "to contain" (TC) at 20°C, this heavy walled borosilicate glass viscosity flask has a top with reinforced lip and is used in determining Saybolt viscosity of petroleum and bituminous materials. This receiving flask can be used in Saybolt viscometer baths. Conforms to ASTM D...

Large capacity borosilicate glass bottles, offered in four different sizes, feature a hose connector sealed at neck (1/2 or 3/8" connection). All bottle necks are compatible with a #12 stopper.

Wilmad Long-Tip Sample Transfer NMR Pipettes are designed for easy transfer of liquid samples contained in 5mm OD NMR tubes, long neck volumetric flasks or chromatography columns. Manufactured from high quality ASTM Type 1 Class A glass Resistant to most organic solvents Transparency provides easy...

These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus...

Now, sample tubes and storage vials have been joined! Save time and money with the Screw Cap EPR Tube; each come with a PTFE/Silicone Septum.

These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289....

To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding process to...