Portable Water Quality Test Kits

Method: colorimetric with test strips and reagents 0.02 - 0.05 - 0.1 - 0.2 - 0.5 mg/l As 0.1 - 0.5 - 1.0 - 1.7 - 3.0 mg/l As MQuant™ UN Number: UN3316 Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. Hazard: Irritant; Dangerous for the Environment The...

Molybdate is used throughout the industrial water treatment and power generation industries as a corrosion inhibitor in both open- and closed-loop cooling water systems. In solution, molybdate anions complex with oxidized iron to form a protective film of molybdate and ferric-oxide. Molybdate is...

HR CHEMets ®  is the new way to test at high ranges and replaces the now discontinued VACUettes product line. The K-2520A Chlorine HR CHEMets® Test Kit (0-125 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): CHEMets®...

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...

Tube test for the determination of BOD5 in test tubes. Precise rapid tests for all kind of water and waste water analysis. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: BOD5 - 0.5–3000 mg/L O2

Tube test for the determination of Detergents. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Detergents - 0.20–4.00 mg/L CTAB

Tube test for the determination of Ammonium. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Ammonium - 300–1600 mg/L NH4-N, Ammonium - 400–2000 mg/L NH4?

Method: colorimetric with test strips and reagents 2 - 5 - 20 - 50 - 100 mg/l Mn MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +15°C to +25°C. Hazard: Corrosive The manganese test can be used for routine testing of water,...

Standard test for the determination of Fluoride. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Fluoride - 0.05–2.00 mg/L F?

This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

DPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet method; EPA-accepted method for NPDWR...

Phenol (hydroxybenzene) is the simplest of a group of similar organic chemicals, which includes cresols, xylenols, and catechols. Phenol itself is a common ingredient of disinfectants. In drinking water, low-level phenolic concentrations impart a foul taste and odor, especially upon chlorination....

Standard test for the determination of Cyanide. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Cyanide - 0.001–0.50 mg/L CN?

Tube test for the determination of Total hardness. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Calcium - 10–100 mg/L Ca²?, Magnesium - 5–50 mg/L Mg²?, Total hardness -...

Kit comes in a cardboard box and contains everything needed to perform 20 tests: Refill, Comparator, reaction tube with lid, tip breaking tool, and instructions. Filming amines are fed continuously into boiler feedwater to protect metal surface from corrosion cuased by dissolved oxygen and carbon...

Tube test for the determination of Iron. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Iron - 0.10–3.00 mg/L Fe

Standard test for the determination of Chlorine/Ozone. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Chlorine (free) - 0.02–10.0 mg/L Cl2 , Chlorine (total) - 0.02–10.0 mg/L Cl2

Tube test for the determination of Silver. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Silver - 0.20–3.00 mg/L Ag+

Method: colorimetric with test strips and reagent 10 - 20 - 40 - 60 - 100 mg/l HCHO MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +2°C to +8°C. Hazard: Corrosive Formaldehyde is used as a disinfectant for surfaces, medical...

Tube test for the determination of Starch. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Starch - 5–100 mg/L Starch

Tube test for the determination of Total Nitrogen with the easiest handling available. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Total Nitrogen - 0.5–22.0 mg/L N

UN Number: UN3316

UN Number: UN3316

Tube test for the determination of Aluminum. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Aluminum - 0.02–0.70 mg/L Al³?