Water Quality

Octet Comparator For determining total iron (dissolved, suspended and collodial) in natural waters Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace amounts of total...

QUANTOFIX Total iron 1000 semi-quantitative test strips for rapid and easy analysis of Iron directly on-site. Measuring range: 0-5-20-50-100-250- 500-1000 mg/L Fe2+/Fe3+

The Spectroquant Iron Cell Test by MilliporeSigma offers a reliable method for photometric determination of iron levels in water. The kit includes all necessary reagents and components for accurate and straightforward testing. It is designed to deliver precise measurements, essential for water...

The Aquaquant Iron Test Kit by MilliporeSigma offers a reliable method for colorimetric analysis of iron levels in water samples. This kit includes a color card and comparator block with long test tubes, providing accurate and easy-to-read results. Designed for both field and laboratory use, it...

QUANTOFIX Glucose semi-quantitative test strips for the determination of glucose content. Measuring range: 0-50-100-250-500- 1000-2000 mg/L glucose

Direct Reading Titrator, Syringe Type For use in LaMotte field titration kits as well as in standard laboratory procedures such as dilutions and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL   All-purpose test tube used primarily with...

QUANTOFIX chlorine dioxide 3000 semi-quantitative test strips for the determination of chlorine dioxide. Measuring range: 0-10-25-50-100-250-500-1000-1500-2000-2500-3000 mg/L ClO2

Ensure the highest standard of water quality with the MilliporeSigma Nitrite Test, a crucial component in the field of water quality testing. These test strips offer an accurate, reliable means of detecting the presence and concentration of nitrites, crucial in various sectors including...

UN Number: UN3316

Copper is naturally present in the earth’s crust and in seawater. Copper-containing fungicides are used to control biological growth in water supplies. The Maximum Contaminant Level Goal for copper is 1.3 mg/L in drinking water. The measurement of copper is an important means of monitoring the...

Method: colorimetric with test strips and reagents 0.02 - 0.05 - 0.1 - 0.2 - 0.5 mg/l As 0.1 - 0.5 - 1.0 - 1.7 - 3.0 mg/l As MQuant™ UN Number: UN3316 Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. Hazard: Irritant; Dangerous for the Environment The...

Molybdate is used throughout the industrial water treatment and power generation industries as a corrosion inhibitor in both open- and closed-loop cooling water systems. In solution, molybdate anions complex with oxidized iron to form a protective film of molybdate and ferric-oxide. Molybdate is...

HR CHEMets ®  is the new way to test at high ranges and replaces the now discontinued VACUettes product line. The K-2520A Chlorine HR CHEMets® Test Kit (0-125 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): CHEMets®...

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...

Tube test for the determination of BOD5 in test tubes. Precise rapid tests for all kind of water and waste water analysis. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: BOD5 - 0.5–3000 mg/L O2

Tube test for the determination of Detergents. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Detergents - 0.20–4.00 mg/L CTAB

Tube test for the determination of Ammonium. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Ammonium - 300–1600 mg/L NH4-N, Ammonium - 400–2000 mg/L NH4?

Method: colorimetric with test strips and reagents 2 - 5 - 20 - 50 - 100 mg/l Mn MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +15°C to +25°C. Hazard: Corrosive The manganese test can be used for routine testing of water,...

QUANTOFIX Peracetic acid 50 semi-quantitative test strips for the determination of peracetic acid. Measuring range: 0-5-10-20-30-50 mg/L

Standard test for the determination of Fluoride. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Fluoride - 0.05–2.00 mg/L F?

This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

DPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet method; EPA-accepted method for NPDWR...

VISOCOLOR Powder Pillows Ammonium reagent set for photometric determination of Ammonium. Ideal for drinking water, surface water and waste water analysis. Measuring range: 0.02-0.80 mg/L NH4-N

QUANTOFIX Carbonate alkalinity semi-quantitative test strips for the determination of the carbonate hardness. (Strong bases -or other acid-consuming substances cause false results.) Measuring range: 0-3.8-7.5-12.5-18.8-25.0 °e