Chromatography Sample Preparation

Chromatography Sample Preparation

Products (63)

Compare Tool

Select up to 3 products

  • Celite 545 Particle Size 0.02-0.1 mm

    CAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3

  • Rocker Vacuum Pumps

    Oil-free vacuum pumps are piston powered, so they do not pollute the air and require minimal maintenance Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the unit is cool Inlet filter traps...

  • SilcoCan Air Sampling Canisters with RAVE Valve

    For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with...

  • Mini-Regulator for Natural Gas and Refinery Gas Standards

    0–300 psig inlet pressure range 0–15 psig outlet pressure range Supplied with 0–15 psig outlet pressure gauge, brass CGA 170 nut and nipple, and 1/8-inch compression outlet

  • Q-sep QuEChERS Extraction Salts

    Free-flowing salts transfer easily and completely. Easy-open packets eliminate the need for a second empty tube for salt transfer. Convenient slim packets fit perfectly into tubes to prevent spills. Ready-to-use tubes, no glassware required. Pre-weighed, ultra-pure extraction salts. Ideal for...

  • Extraction Cell Caps & Replacement Parts for ASE Systems

    Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 Method 3545, Pressurized Fluid Extraction (PFE). Restek offers a wide range of replacement parts to keep your extraction system running smoothly. All parts...

  • Florisil PR (Bulk Adsorbent)

    Florisil PR is commonly used to remove polar interferences from pesticide residues. This bulk material is ideal for labs packing their own extraction cartridges for pesticide residue extractions. Pesticide residue grade Packaged in glass containers

  • Restek Replacement Parts for Original Resprep SPE Vacuum Manifolds

    Resprep® vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12- and 24-port configurations. These manifolds help in achieving consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The...

  • Method Specific SPE Cartridges

    These cartridges have been specifically designed to provide consistent and reproducible results for the method or application stated. All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or all of...

  • Resprep-C18 and Resprep-C8 SPE Disks

    Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks

  • Air Canister Tripod

    Restek’s air canister tripod holds two canisters simultaneously for collocated ambient air sampling. The custom-designed bracket holds most 1, 3, and 6L canisters* securely without any tools. Lightweight (12 lb) and compact for easy storage and transport Extends from 6' to 9' high...

  • Sample Cylinders, High Pressure

    Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3...

  • Ottawa Sand (Bulk Adsorbent)

    Ottawa sand is listed in several U.S. EPA methods as the specified medium for matrix spike and laboratory control blanks. Sample medium for matrix spikes and laboratory control blanks Packaged in convenient 5 kg buckets

  • Extraction Cell Bodies for ASE Systems

    Cell bodies are serialized for easy sample identification Smooth inner surfaces for easier cleaning Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 Method 3545, Pressurized Fluid Extraction (PFE). Restek...

  • Sample Cylinder Valves

    Alta-Robbins' unique valve design incorporates a fully contained soft seat that provides durability and longer lifetime. Tight shut-off is easily achieved with very low torque, yet the valve is rugged enough to withstand overtightening. Multiple valve configurations are available for both...

  • Chromatographic Spray

    Delivers a true aerosol with no droplets. Enables thorough brushing for uniform development. Spray action begins at .028m3 per minute air flow. Atomization rate approximately 10cc per minute. Easily controlled with thumb pressure on vent hole. Suction stem is 125mm long.

  • Resprep SPE Cartridges (Normal Phase)

    Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be...

  • Multi-Layer Foil Gas Sampling Bags

    Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose the...

  • Tedlar Sampling Bags

    Sampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose...

  • SDVB Resin

    Styrene/divinylbenzene, equivalent to XAD-2 resin Untreated, packaged in 1 kg plastic containers Spherical, 20 to 60 mesh particles

  • Ultra-Clean Resin

    Equivalent to XAD-2 Resin—Exclusively from Restek! Ultra-Clean resin typically eliminates the hassle of cleaning and testing resin for air sampling. For adsorbing semivolatiles in air. Cleaned and GC tested. Available in 100 gram quantities.

  • Rupture Disk Tee

    Unlike other designs, Alta-Robbins rupture disk tee is NOT permanently soldered to the disk, making the disks replaceable. Disks are easily changed without removing the valve or tee from the cylinder. These tees are designed to be installed into existing systems to provide reliable overpressure...

  • Accessories for Thermal Desorption Tubes

    1174R53 : Long-term storage of blank/sampled tubes. 1174R54 : Long-term storage caps. 1174R55 : Use for tightening long-term storage caps. 1174R57 : Assists with tube packing. 1174R58 : Use for connecting tubes in series. 1174R59 : Required for diffusive sampling with stainless steel tubes.

  • Regulators for Scott/Air Liquide Transportable Gases

    Use the CGA-160 inlet connection with 14L Scott/Air Liquide transportable gases. Use the CGA-165 inlet connection with 48L Scott/Air Liquide transportable gases.

Compare Tool

Select up to 3 products