Lab Glassware

M ade with solid PTFE for air tight vacuum work, one of the highest quality products you can find in the market.

Horizontal design of bubbler allows for in line connection and purging of apparatus. Hose connection has a 9mm OD middle serration. Complete with standard taper inner joint.

The Ai heavy wall short path distillation head with vacuum jacket. Features Heavy wall for durability Boiling flask and distribution ports Vacuum jacketed Five sets of vigreux Thermo probe port: 14/20 joints Recirculating fluid ports: GL-16 adapters Glass material: high borosilicate glass 3.3.

Adapter has a Nylon compression cap and a Viton o-ring to form a vacuum tight seal. Cap accommodates 5.0 - 7.5mm O.D. thermometer or gas inlet tube. The 8mm hose connection can be used for N2/Ar introduction or vacuum. Supplied with one Nylon cap and one Viton o-ring.

These PYREX® Claisen adapters have 19/22 Standard Taper outer joints at the upper end and on the parallel sidearm and an inner 19/22 Standard Taper joint at the lower end.

Allows introduction of reactants below the interior surface. Hose connection has a O.D. of 10mm at the largest serration and is bent downward at a 90º angle to the inner joint.

Used with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.

Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

Adapters for use with AF-0060 thru AF-0062 vacuum manifolds that permit the manifold to be utilized with a multitude of standard glassware or tubing products. The AF-0070 adapters are to be used with either a Cajon® fitting on the main ports or at the ends of the manifold with heavy wall rubber...

Fabricated from 18-8 type Stainless Steel No. 303 free machining. Inside diameter the same as our glass joints, 7655, and are fully interchangeable. Can also be supplied from other metals, made to order. Shanks are machined for thread sizes listed, and are available not threaded or machined with NPT...

Straight reducing connector tube, with ends of different size Ideal for a variety of laboratory applications, this connecting tube is a versatile addition to any scientific workspace. It is designed with precision and durability in mind, ensuring reliable and consistent performance. Its high-quality...

Synthware flow control adapter with metering stopcock. Adapter has a 2mm PTFE metering stopcock between top outer and lower inner standard taper joints. Permits flow control of fluids between apparatus.

Ideal for use as a stillhead adapter. With Standard Taper inner joints at each end Both joints are of the same size Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Micro impinger designed for sampling of small volumes of air at low jet velocity, as per EPA Method 6. Impinger bottle is graduated from 5 to 30mL in 5mL subdivisions. Both the bottle and stopper have 24/40 standard taper joints. The nozzle being replaced with an extra coarse fritted gas dispersion...

Ace Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breaking under...

Synthware Vigreux distillation connecting adapter. Indenstations in lower section improve liquid/vapor contact. The standard taper top outer joint accomodates a 76mm immersion thermometer. Bottom and side joints are standard taper inner joints.

Porous fused quartz discs. Porosity sizes are as listed and differ from porosities of borosilicate discs.

Screw thread tube for replacement on apparatus using the GL thread, which is manufactured to I.S.O. specifications. (GL is the I.S.O. designation for GLASS.) To be used with a CG-196 solid cap with liner or a CG-195 cap with aperture and CG-197 silicone sealing ring.

Spherical lead free soda lime glass beads for use in disruption of bacteria, mammalian cells. Speed up the process of cell lysis with these high-quality Disruptor Beads. Designed for optimal performance, they facilitate efficient mechanical rupture of cell walls, ensuring a high yield of...

Bidwell-Sterling designed for the determination of moisture in foods and organics. 1178W31 has a drip tip Made to ASTM specifications E123 Also conforms to many methods of the American Oil Chemists Society Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I...

Nylon or PTFE bushings for use with any #7 Ace-Thred. Solid bushings are not stoppers (see 5803,5846) but are intended for drilling custom diameter holes. Ferrule designed bushings can be used with either 11710-03 PTFE ferrule for 1/8 inch OD tubes, code -05 for 3/16 inch OD tubes or code -07 for...

The Corning® chemical-resistant glass rod is perfect for use in scientific research and development as well as in chemistry labs.

Adapter, o-ring joint to size E hose connection, fits 3/8"-7/16" id tubing, fetfe o-ring included Dealing with complex lab setups can be challenging, especially when it involves a reliable connection between glass systems and hoses. To address this, the Adapter, O-Ring Joint to Hose Connection, is...

Drying tube adapter with inner joint and rubber stopper. This adapter for drying tube is an essential piece of glassware for any lab conducting chemical reactions sensitive to moisture. It features a robust construction to withstand various chemical reactions, and its design ensures efficient...