Supplies AA General

The Agilent Technologies 0.7 mm capillary nipple E consists of an internal thread that provides a secure connection to any adapter or connector. Application: For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only,...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Metal Body Nebulizers, for AAnalyst 100/200/300/400/700/800 This product is only...

The Agilent Technologies venturi kit is suitable for use with hi-vac and adjustable barrel nebulizers, which are used with Mark V and VI spray chambers. Application: For Barrel Nebulizer, For Hi-Vac & Adjustable Barrel Nebulizers Used With Mark V & VI Spray Chambers This product is only available to...

The Agilent Technologies replacement FIMS cell is suitable for FIMS-100/400 and PerkinElmer FIMS/FIAS instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies Type II connector consists of a 1/4 Inch internal screw thread that provides an efficient connection to any PerkinElmer instruments. Application: For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers....

Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other...

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: Spray...

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing...

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research...

Probe, inert, 1.0 mm id, PTFE-sleeved, for SPS 3 autosampler for operation with AA, MP-AES, ICP-OES, and UV-Vis instruments (or with diluter). Application: For SPS 3 Autosampler For Operation With AA, MP-AES, ICP-OES, & UV-Vis Instruments (or With Diluter) This product is only available to U.S....

The Agilent Technologies replacement filter is the ideal replacement filter for mercury scrubbers in mixing and separation assemblies. Application: For Mercury Scrubber, FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be...

The Agilent Technologies nebulizer spring features a solid stainless steel construction that provides durability and prevents corrosion. Application: For AAnalyst 100/200/300/400/700/800 & PinAAcle 900, PerkinElmer AAS Instruments This product is only available to U.S. Domestic Customers. For...

Spray chamber tools enable the user to complete routine maintenance on the Mark 7 spray chamber. Maintenance is easy. Special spray chamber tools are required, to remove the nebulizer components which are integrated into the nebulizer block. Application: Nebulizer Venturi Removal & Replacement This...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent nebulizer used in the Mark 7 atomization system is easily adjustable by the user, so performance can be optimized with any sample type. The nebulizer is integrated into the spray chamber assembly and comprises easily interchanged capillary assemblies for low cost maintenance. All Agilent...

Probe, inert, 1.3 mm id, PTFE-sleeved, for SPS 3 autosampler. Application: For SPS 3 Autosampler This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing...

Tubing kit for VGA 77. Includes silastic tubing for gas supply to reaction coil and gas-liquid separator, 2 x barb connectors for 3/32 inch ID tubing, 3m length of PVC tubing for gas inlet to VGA, sample and reagent uptake tubing for hydride module and 4 connectors to join the inlet sample capillary...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 6.4 mm K adapter consists of an external thread that provides good connection and ensures a leak-tight seal. Application: For 1.8 mm OD Nipple, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only available to U.S. Domestic Customers. For research use only, not...