Supplies AA General

Agilent sample loops are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only available to U.S....

Agilent burner heads for PerkinElmer PinAAcle/AAnalyst flame AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Nitrous Oxide-Acetylene or Air-Acetylene Operation, For Pinaacle & AAnalyst...

The Agilent Technologies clamp bead adjuster is suitable for use with Mark 7 spray chamber. Application: For Mark 7 Spray Chamber This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies multi-use quartz window is designed to use with HGA graphite furnaces and the quartz construction provides added strength and durability. Application: For PE FIAS 100/200/400, FIMS, HGA Graphite Furnace, Optima DV ICP-OES & DSC DPA 7 This product is only available to U.S....

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For Seal...

The Sample Introduction Pump System (SIPS) is an innovative sample introduction and dilution system for flame AA. SIPS eliminates the task of manual preparation of multiple calibration standards, providing fast, accurate online dilution of over-range samples. Application: For SIPS 10/20, to Seal...

Compatible with Agilent 50/55/110/200/240/280 flame AA. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies high sensitivity nebulizer is made from an alloy of platinum and iridium and provides good resistance to corrosion. This nebulizer can be used on a variety of inorganic acids and organic solvents. Application: For AAnalyst 100/300/700/800 This product is only available to...

The Agilent Technologies 2.79 mm peristaltic pump tubing consists of a two-stop design and the marprene construction provides more flexibility and endurance. Application: For AS-93plus/S10 Autosampler This product is only available to U.S. Domestic Customers. For research use only, not to be used in...

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is...

Agilent capillary tubing is equivalent to PerkinElmer AA tubing, so you can be confident that it will integrate seamlessly with your PerkinElmer AS-90/90A/90plus/91/93plus/S10 autosampler. Application: Sample Tubing, For as Stainless Steel Probe, For FIAS, For AS-90/90A/90Plus/91/93Plus/S10...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

These graphite furnace tools are required to enable removal and replacement of the graphite electrodes or the graphite shroud. These tools are suitable for use with the Agilent GTA-96/97/100/110/120 graphite furnace AA systems. Application: For GTA 96/100/110/120 Zeeman This product is only...

A range of rinse reservoirs and other autosampler supplies are available to upgrade probe rinsing capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab. Application: For SPS 3 Autosampler This product is only available to U.S. Domestic Customers. For...

Agilent burner heads for PerkinElmer PinAAcle/AAnalyst flame AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Air-Acetylene Operation, PerkinElmer This product is only available to U.S. Domestic Customers....

Agilent burner heads for PerkinElmer PinAAcle/AAnalyst flame AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Air-Acetylene Operation, For Air-Acetylene Elements, for Pinaacle & AAnalyst...

Agilent adapters with internal thread, adapters with external thread, and connectors for PerkinElmer FIMS/FIAS systems are equivalent to genuine adapters and connectors for PerkinElmer FIMS/FIAS systems. You can be confident that these adapters will integrate seamlessly with your PerkinElmer...

Santoprene peristaltic pump tubing, yellow/yellow, 15/pk. Suitable for ketone-based solvents including MIBK and DIBK. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies burner base O-ring is suitable for use with Mark 7 spray chamber in all Agilent AA systems. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies cell support is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies nebulizer bung O-ring kit is suitable for use with spray chamber. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies clamp bush guide is suitable for use with Mark 7 spray chamber. Application: For Mark 7 Spray Chamber This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies capillary tubing measuring 0.023 Inch x 10 Feet provides a secure connection for 0.038 Inch Dia tubes. Polyethylene construction provides added strength and durability and is designed to use with cross-flow and high solids nebulizers. Application: For Sample Tubing,...

This peristaltic pump tubing is recommended for use with the Agilent fully automated modular VGA 77 vapor generation accessory, which. is used with Agilent flame AA systems to enable rapid trace level determinations of mercury (using the proven cold vapor technique) and other hydride-forming...