ICP-MS Nebulizers

ICP-MS Nebulizers are specialized instruments designed for use in inductively coupled plasma mass spectrometry (ICP-MS), enhancing the efficiency and accuracy of sample introduction. These nebulizers convert liquid samples into aerosols, which are then transported into the plasma torch for analysis. The precision of ICP-MS Nebulizers, particularly those from the nebulizer ICP range, allows for detecting trace elements and isotopes at extremely low concentrations, making them invaluable in environmental monitoring and geochemistry. Their design ensures minimal sample loss and maximizes analytical sensitivity, offering reliable and consistent performance. By providing a seamless interface between liquid samples and high-temperature plasma, these nebulizers support the advanced analytical capabilities of ICP-MS systems, contributing to the generation of accurate and reproducible results.

For related products, see also our lab tubes range.

ICP-MS Nebulizers

Products (34)

Compare Tool

Select up to 3 products

  • Type C0.5 Glass Nebulizer for NexION

    The MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and...

  • Concentric Type CT Q + Nebulizer for NexION 2000/1000

    Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow...

  • EzyFit Sample Tube - Twin

    Replacement tubing for internal standard kit.

  • 0.5 mm I.D. Sample Intro Line for PFA-ST Nebulizer for NexION 2000/1000

    One Sample Introduction Line for PFA-ST Nebulizer is included in the NexION 2000 ICP-MS Productivity Configuration's Consumable Kit (N8150056) and the Semi Configuration's Consumable Kit (N8150057).

  • Capillary Tubing 18 0.043 x 0.017 for Mira Mist

    0. 5 meters of . 044 OD X . 018 ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.

  • 200 uL/min self-asp capillary

    200 µL/min self-aspirating sample capillary for ST nebulizer. 0.30 mm i.d., yellow marker

  • PTFE Capillary Tubing

    PFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.

  • GemCone High Dissolved Solids Nebulizer

    High solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High...

  • 1 mL/min self-asp capillary for ST Nebulizers

    1 mL/min self-aspirating sample capillary for ST nebulizer 1 mm i.d., gray marker

  • Adapter Tubing GemTip Nebulizer

    Used to connect capillary tubing (Product Number: 09908265) to Cross-flow nebulizers, and to larger i.d. peristaltic pump tubing.

  • 700 uL/min self-asp capillary

    700 µL/min self-aspirating sample capillary for ST nebulizer. 0.80 mm i.d., blue marker

  • CTFE Liquid Fitting - male

    CTFE Liquid fitting - male with barb end

  • Type C PFA ST3 Nebulizer for NexION 2000/1000

    Type C PFA ST3 Nebulizers are made from high purity, HF-resistant PFA. Included is a fluoropolymer nebulizer gas line and a 1/4-28 fitting. The sample uptake rate is controlled by the diameter of the external capillary or probe. Included in the NexION 2000's PFA-Platinum HF-Sample Introduction Kit...

  • GemTip Cross-Flow II Tip Kits

    The Tip Kit includes a clear sapphire sample tip and a red ruby argon tip. The tips are constructed of PEEK with the gem inserts noted for maximum corrosion resistance.

  • EzyFit Glass Mixing T-piece

    Replacement mixing chamber/combiner for internal standard kit.

  • Male Barb CTFE Fitting for Peripump Union for NexION 2000/1000

    Four Male Peripump Union barb fittings are included in the NexION 2000 ICP-MS Base Configuration's Consumable Kit (N8150054), Core Configuration's Consumable Kit (N8150055), Productivity Configuration's Consumable Kit (N8150056), and Semi Configuration's Consumable Kit (N8150057).

  • Gem tip Cross-Flow II Tip Kits for Optima 8x00

    The PerkinElmer GemTip Cross-Flow II Tip Kit is for use with the Optima 8x00 ICP-OES. Excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids. The Tip Kit includes a clear sapphire sample tip and a red ruby argon tip....

  • 100 µL/min PFA MicroFlow Nebulizer, Carbon fiber probe, 100 cm long

    This nebulizer self-aspirates at low-flow rates with any autosampler and provides the same benefits of the PFA MicroFlow nebulizer. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is...

  • TUBING-PFA 0.5MM ID

    TUBING-PFA 0.5MM ID

  • Concentric Type CT SilQ + Nebulizer for NexION 2000/1000

    Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow...

  • PEEK Mira Mist Nebulizer 0.2-2.5 mL/min Uptake Rate for Avio 200/500 and Optima 2x00/3x00/4x00/5x00/7x00 DV/8x00

    The PEEK Mira Mist ® nebulizer produces excellent mist and can handle high level of particulates in sample. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features include standard pressure (45 psi), low sample flow and enhanced parallel path design.

  • Nebulizers And Nebulizer Supplies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • ICP-OES Nebulizers

    Agilent Technologies

    Agilent offers a wide range of concentric and microconcentric glass nebulizers to facilitate sample introduction for a variety of ICP-OES measurements. Nebulizer styles can accommodate samples with up to 20% total dissolved solids (TDS) and slurry samples containing more than 20% total dissolved...

Compare Tool

Select up to 3 products