Spectrophotometer Cells/Cuvettes

Spectrophotometer Cells/Cuvettes

Products (152)

Compare Tool

Select up to 3 products

  • Disposable UV Cuvette

    A cost effective alternative to quartz UV-transparent Application between 220 nm and 900 nm Fits nearly all commercial photometers Superior chemical-resistance Disposable cuvettes are ideal for analysis of DNA, RNA and proteins, replacing expensive fragile quartz cuvettes. They eliminate the tedious...

  • Cuvette Holder, Pk. 5

    labForce® (powered by Thomas Scientific)

    Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

  • Thomas Rectangular Spectrophotometer Cells

    Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

  • Thomas Polystyrene Fluorometry Cuvettes

    Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The polystyrene cuvettes...

  • Thomas Polystyrene Cuvettes

    Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside dimensions....

  • Thomas Sub-Micro Cells

    labForce® (powered by Thomas Scientific)

    Designed for the measurement of very small samples Retain exterior dimensions of standard cells Volume range: 10 µL to 160 µL Path length: 10 mm The entrance to the sample compartment is hemispherical to eliminate sharp corners which can cause sample loss due to capillary action. The...

  • Thomas Square Spectrophotometer Cells

    labForce® (powered by Thomas Scientific)

    Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral range shown in listings...

  • Thomas Methacrylate Cuvettes

    Disposable Methacrylate Cuvettes Convenient and affordable Save time with no cleaning required Prevents cross-contamination Useable in the range of 285 to 750 nm. Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside...

  • Cuvette Caps, Square, Tight Fit, Cs.1000

    labForce® (powered by Thomas Scientific)

    Polyethylene Fits most standard 10 mm cuvettes Flexible fins on 8495V27 caps allow tight fit with 10 mm cuvettes from most other manufacturers.

  • Thomas Fluorescence Spectrophotometer Cells

    Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19 has a stopper; outside...

  • Thomas Methacrylate Fluorometry Cuvettes

    Disposable Methacrylate Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side Standard 10 mm Light Path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The methacrylate...

  • Cuvette Stirrers, Cs.1000

    labForce® (powered by Thomas Scientific)

    Made of disposable polystyrene Dimensions: 120 mm long by 3 mm diameter.500 stirrers in a polyethylene bag, 2 bags per case.

  • Agilent Rectangular Cell Holder

    The Agilent Technologies long rectangular cell holder comes with cell lifter and cell height adjustment screws. This cell holder is compatible to use with Cary spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

  • Screwdriver

    Agilent Technologies

    The Agilent Technologies #2 Pozi Kincrome screwdriver of 38 mm length, is suitable for general repair and maintenance purposes. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Extension Lead

    Agilent Technologies

    The Agilent Technologies long extension lead has an easy-to-use and durable design and is perfect for mounting the probe outside the sample compartment. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • UV-Vis Trans Performance Test Kit

    The Agilent Technologies UV-Vis trans performance test kit is suitable for use with chromatography or spectrometry system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Quartz Block Insert 9 X 9.5mm

    Agilent Technologies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Color Standard

    Agilent Technologies

    The Agilent Technologies color standard is suitable for use in spectrometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Cylindrical Single Cell Holder

    The Agilent Technologies single cell holder features a cylindrical design and is designed for the storage and neat organization of the cells that contain liquid sample. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Aperture mask, solid sample holder, 1 mm

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Rectangular Macro Cell

    Agilent Technologies

    Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling....

  • Accessories for BRAND UV-Cuvette Disposable Spectrophotometer/Photometer Cuvettes

    The BrandTech Accessories for BRAND UV-Cuvette are designed to enhance the utility and convenience of disposable spectrophotometer and photometer cuvettes. These accessories ensure optimal performance and ease of use in laboratory settings. They are crafted to work seamlessly with the cuvettes,...

  • Cary 50 Dissolution Tubing Spares Kit

    Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S. Domestic...

  • Flow-Through Dissolution Cell

    Agilent Technologies

    M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, z height 20mm. Compatible with Agilent Cary 100/300 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Compare Tool

Select up to 3 products