SP Bel-Art

Ideal for any lab setup, SP Bel-Art's Round Spinbar Magnetic Stir Bars offer efficient and reliable stirring of solutions in closed containers, greatly minimizing the risk of contamination. Crafted with high-quality materials, they ensure a consistent and powerful magnetic connection with the...

Graduations are always visible The clamps fit standard support rods, 12.5mm (1/2") and includes an adapter to fit to narrower 9.5mm (3/8") rods. Polypropylene is chemical resistant and autoclavable at 121°C (250°F).

This cost-effective tool is used for scraping up cell lysates and harvesting tissue cultures from various cell culture dishes. The slim blade (15mm, 0.6") is perfect for work in 35 and 60mm Petri dishes as well as 6 and 12 well cell culture clusters. These Cell Lifters are able to be used again- as...

Seamless, rotational-molded polyethylene tanks Lightweight and easy-to-handle Available with and without faucet Resistant to most acids and all alkalis Made with top flanges, includes covers and can be supplied with spigots, fittings, dams, partitions etc.

Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.  • Fingers allow simultaneous decanting to save valuable time  •...

Easily recover stirring bars from containers using the Spinbar® Magnetic Retriever. Offered in two different lengths (12" and 18"), each retriever has a polyethylene rod, 9.5 mm diameter, with Alnico magnet sealed in one end and loop on opposite end.

This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak...

Features Fritware® Porous Polyethylene Disc High-density polyethylene bell-mouthed fitting with a sealed-in, coarse porosity polyethylene disc at the large end results in smaller bubbles. 30.5cm long (12") x 6.35mm ID (1/4") low-density polyethylene tube is fitted to the other end...

Epoxy-coated steel wire, holds six bottles in 60 mm square grids on two levels Bottom level has rails to hold the tip of the conical bottom of the bottles Dimensions are 8-3/8” x 5-1/2” x 4” (20.8 x 13.5 x 10.2 cm H) Perfect for conical and round bottom bottles that can't stand up...

The Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large...

Flexible vinyl cover slips are packaged with interleaved tissue for protection. Provides a refractive index similar to glass Unbreakable, safer than glass Used in biological and medical labs as well as educational applications

Prevents Stirring Bars from Pouring Out When Emptying Containers The Magnetic Stirring Bar Arrester holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container. 9.5mm (3/8") thick polyethylene 51mm (2") diameter with a...

Dual-action cleaner prevents fogging and is anti-static Economical: one drop per lens is effective! Polyethylene bottle features turret-type dispensing of a single drop or stream Bottle size: 59ml (2oz) Dimensions: 35mm (1-3/8") diameter x 100mm (4") tall 2 per bag Keep lens cleaner handy...

Adheres to any clean surface, including Teflon® fluoropolymer resin coated materials, and peels off without leaving a sticky residue. Pencil, ball-point pen or solvent ink marker remain legible under the most demanding laboratory conditions. Colored paper with rubber resin adhesive resists...

Scienceware White Sterileware Scoops are the perfect shape and size for taking samples, especially from wide-mouth containers. Stays vertical when packed or unpacked for use as weighing boat Long handle keeps hand away from sample High-impact, FDA grade polystyrene Sterilized by Gamma Irradiation,...

Makes pouring liquids from large cylinders into other vessels easier Polypropylene-molded cylinders have a double scale with raised numerical graduations for easy reading Hexagonal base makes the cylinder stable and roll proof Chemically resistant and steam autoclavable at 250°F (121°C) Hand opening...

Polyethylene Needle type O-ring seal prevents back pressure liquif from escaping through the operating knob Used with Scienceware® aspirator bottles and tanks Outlet accepts 16mm I.D. (5/8") tubing 0210D02 fits standard steel drums

Steam autoclavable at 121°C (250°F). Dimensions: 210mm x 70mm x 35mm H (8 ¼" x 2 ¾" x 1 3/8"). Two-level polypropylene rack organized and stores twenty 1.5ml tubes in numbered wells. Tubes protrude 25mm (1") for easy removal.

Economical Block Dry Ice Maker for On-Demand Easy to set up and use, this compact device saves the time and expense of receiving a dry ice delivery. Can be attached to a liquid CO₂ cylinder (not included) equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice...

Spinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube; can be...

White Polypropylene Available in an assortment of sizes FDA approved Excellent for storing liquid or dry stock Can be used for samples Jars are autoclavable at 121°C (250°F) Caps have PE foam lining and are not autoclavable

These fittings ensure a tight, secure connection between tubing having different inner diameters (I.D.). Chemical-resistant polypropylene plastic for use with a wide range of liquids or gases FDA-grade for direct contact with food, drugs, and cosmetics Autoclavable Overall Dimensions: 0210B65 : 41.3...

The danger of being cut and infected by sharp biohazard waste materials is minimized by using safety pouch Safely contains sharp-edged items for disposal Made of 10 mil thick solid paperboard which opens to an oval shape by folding bottom flaps. After inserting objects, the top flaps are closed and...

Spinfin® magnetic stirring bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Maintains its position in a vessel and will not wobble Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction...