SP Bel-Art

Racks hold two rows of four tubes up to 20mm in diameter. Overall dimensions 108mm x 60mm x 121mm high (4 1/4 " x 2 3/8" x 4 3/4 "). Steam autoclavable at 121°C (250°F). Store and condition eight pH, Redox/ORP or ion electrodes in individual test tubes. Polypropylene rack is chemical and corrosion...

This 500 mL wash bottle is specifically designed for safe and effective storage of acetone in a laboratory setting. The red, safety-labeled, 2-color design ensures easy identification, reducing the risk of error in fast-paced environments. Made of durable polyethylene, it is resistant to a wide...

Right-to-Know safety-labeled wash bottles are OSHA compliant and pre-printed with the full color NFPA diamond and other important safety information. 53mm wide mouth for easy refilling, bottles are made of translucent LDPE (Low Density Polyethylene) and feature color caps to enhance identification....

Crafted with a focus on longevity and safety in rigorous laboratory environments, these wash bottles are essential tools for any scientific endeavor. The bottles are constructed from low-density polyethylene, promising resistance to a variety of chemicals and corrosion. The polypropylene caps...

Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic solvents,...

24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".

These economical measures are ideal for retrieving small, specific volume samples of powders or liquids. Use a separate spoon for each material sampled to avoid cross contamination. Unique flat bottom shape allows them to be used as weighing boats for additional sampling accuracy Made from white,...

Made from optical quality polycarbonate material, these plain form hydrometers are perfect for field work where breakage could be a concern. Used for measuring sodium chloride saturation of salt brines in industries including food, fishing, and transportation, they are available in models to measure...

Sturdy steel, A-shaped rack Plates rest on rubber supports Rubber pads prevent sliding Three of the rack’s ten slots are wide enough to hold double plates. Constructed of steel with a baked-on epoxy coating. Minimum width of the plate supported is 6 1/2” (16.5 cm). Overall dimensions: 7...

Double-Ended with Two Bowl Sizes These double-ended, 304 stainless steel sampling spoons have a solid, rounded shaft. Available in plain polished stainless steel or coated with Fluo-Kem® Teflon® FEP FEP complies with FDA regulations governing direct food contact applications

Screw Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm (1/2") O.D. Spring...

Easy-to-clean two-piece, polypropylene plastic Buchner funnels include a molded in perforated plate. Lightweight; not top-heavy Steam autoclavable at 121°C (250°F) Use with Vac-Ring Filter Seal (1189N06) for quick filter setup

Dispense Directly from 5 Gallon Graduated Jug without Lifting or Moving Use this 20 liter (5 gallon) jug with molded-in gradations (in gallons) to store and dispense common solutions, including janitorial cleaners, deionized / distilled water, or other aqueous liquids. Gasketed and threaded LDPE...

This rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels Includes 18...

Fits 5 sizes of tubing and will act as straight connector for the same size tubing on both ends, or will act as a reducer for any combination within the range. The inside diameter increases with notch size when needed length is cut off for unrestricted flow. These molded polypropylene connectors are...

Cyanoacrylate adhesive Bonds virtually all surfaces, including wood, leather, glass, metals, ceramics, rubber and most plastics. A single drop of fast-setting Super Glue provides an amazingly strong repair or assembly joint. Solvent free, it needs no catalyst or heat. Colorless and transparent when...

Isolate instruments from disturbing vibrations Two convenient sizes Absorb vibration down to 9 Hz Molded of dense black and white terrazzo, with four Vibro-Absorber™ cushions and neoprene feet, damping mount absorbs even the slightest vibrations. Supports up to 35 lbs. Available in two sizes,...

This corrugated cardboard receptacle is perfect for containing biohazardous waste slated for incineration. When the box is full, pull the flap to a closed position and the entire unit can be placed in the incinerator. Tabs along the top edge keep a clear 0.038mm (1.5 mil) thick polyethylene...

Specifically designed for use with 18, 24 and 36" Buchner Funnels, apply slight downward pressure and ‘sweep’ the trowel along the surface of the precipitate to quickly and efficiently smooth fissures appearing during the filtration process. Large surface area smooths fissures faster than...

Choice of vibration, sound and/or light alarms makes this timer perfect for high noise locations. Timing capacity: 99 minutes:59 seconds Count direction: up/down Vibration, light and loud buzzer sound alarms can function at one time, or be independently turned off Clock function Lay flat on a bench,...

Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to smeared...

Durable, versatile, assorted sizes Sturdy, polypropylene funnels Ridges help prevent vapor lock Recommended highly for continuous labwork Steam autoclavable at 121°C (250°F)

These micro sample tubes have a captive plug and will withstand the forces of a microcentrifuge. Polypropylene Steam autoclavable at 121°C (250°F)

Designed to fit in a standard 2” freezer rack, this 144-place PCR Tube Freezer Box will hold individual and/or strip 0.2ml PCR tubes. Designed for ULT freezer storage at temperatures down to -86°C Durable and impervious to moisture Clear polycarbonate lid and base and alpha-numeric index...