Select up to 3 products
With standard taper outer joint at the top, and inner joints on the bottom and sidearm, all being the same size. Inner joints are at a 75º angle to one another.
Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa.
Horizontal design of bubbler allows for in line connection and purging of apparatus. Hose connection has a 9mm OD middle serration. Complete with standard taper inner joint.
Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum
Similar to CG-1512 recovery flasks, but plastic coated to prevent injury from broken glass and spillage of hazardous materials.
Pyrex® or Duran® borosilicate plate glass. The 1/16in, 1/8in and 1/4in thick plates have edges that are cut and swiped. The 1/2in thick and over have ground edges.
Replacement Lid only. The Chemglass Replacement Lid is specifically designed for TLC developing tanks, ensuring a snug fit to prevent solvent evaporation during chromatographic processes. Made from durable materials, it withstands the chemical environments typical of TLC applications. This...
CLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,...
13.5 Rubber Stopper Similar to CG-3026 except with one hole. These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with...
Stir Bar Kit, Magnetic, PTFE, Mirco, To Consist Of The Following: 6ea CG-2003-12, 6ea CG-2003-14, 6ea CG-2003-16, 3ea CG-2003-10, 3ea CG-2003-13, 3ea CG-2003-17.
Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom...
These convenience packs come with 100 bonded closures and vials packed seperately. Closures with bonded septa are not attached.
Flasks are designed for culturing organisms that require a large surface area to volume ratio. Flask has 3 baffles on lower outside edge to help oxygen transfer to the culture medium. Available with a plain 59mm ID neck, 38mm OD Delong style neck or GL-45 screw neck supplied with a vented cap.
The 8" Eco Funnel is make of HDPE and has a 2000mL fluid capacity. Features an easy to use lid, gasket and positive latch to close the lid and maintain an airtight seal. A filter is also built into the interior to reduce the loss of magnetic stir bars and other items when emptying the contents...
Allows introduction of reactants below the interior surface. Hose connection has a O.D. of 10mm at the largest serration and is bent downward at a 90º angle to the inner joint.
Chemically inert PTFE beakers can withstand temperatures up to 260°C. Enhance your laboratory's functionality with these low form PTFE beakers. Known for their resistance to heat and chemical reactions, these beakers make an ideal addition to any scientific setting. They are designed to...
Adapters for use with AF-0060 thru AF-0062 vacuum manifolds that permit the manifold to be utilized with a multitude of standard glassware or tubing products. The AF-0070 adapters are to be used with either a Cajon® fitting on the main ports or at the ends of the manifold with heavy wall rubber...
Safety Pie Plate Holder keeps up to Four pie wedges securely locked together on the hotplate Aluminum construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced for...
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
Micro impinger designed for sampling of small volumes of air at low jet velocity, as per EPA Method 6. Impinger bottle is graduated from 5 to 30mL in 5mL subdivisions. Both the bottle and stopper have 24/40 standard taper joints. The nozzle being replaced with an extra coarse fritted gas dispersion...
Thin wire thermocouple is 30-gauge x 36" long, completely encased in PTFE for submersion in reaction. Excellent for use with small volumes, it can be inserted through rubber septa.
From the reliable brand of Chemglass, comes a pair of dark blue forceps, designed with flat rounded tips for gentle and accurate handling. Measuring 5 inches or 127mm in length, these forceps provide an optimal balance between control and reach. Manufactured from polypropylene, these forceps boast...
Porous fused quartz discs. Porosity sizes are as listed and differ from porosities of borosilicate discs.
Screw thread tube for replacement on apparatus using the GL thread, which is manufactured to I.S.O. specifications. (GL is the I.S.O. designation for GLASS.) To be used with a CG-196 solid cap with liner or a CG-195 cap with aperture and CG-197 silicone sealing ring.