Chemglass

“T” shaped tube having serrated ends for connection of rubber, latex or Tygon® tubing.

Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. All ranges have 1º subdivisions. Thermometer has a white back and a 6 to 7mm outer diameter.

Support Stand was designed to accommodate vessels up to 10" diameter, to sit close to the support rod. Support rod is ideal for mounting stirring motors. Each of the four corners rests on a rubber cushion. The powder coated steel base measures 7.875” (200mm) W x 12.5" (316mm) deep...

Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. All ranges have 1º subdivisions. Thermometer has a white back and a 6 to 7mm outer diameter, and is calibrated for 76mm (3") immersion.

Replacement Parts For Internal Impeller Assembly Bioprocess Spinner Flasks Chemglass offers an Internal Stirring Assembly designed for BioProcess Spinner Flasks, optimizing mixing and aeration of cell cultures. Its precision-engineered components ensure efficient and uniform stirring, promoting cell...

Condenser has a specially formed spiral inner tube providing a long vapor path, ensuring good heat transfer and anti-flooding characteristics. Condenser has a standard taper outer joint at a 15° angle to the condenser and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the...

Barrett style distilling receiver used to determine the water content in petroleum or bituminous material. Receiver is made according to ASTM specifications, with the addition of the top outer standard taper joint and lower stopcock. Available with glass or PTFE stopcocks.

Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated...

With a 40% larger opening, the Large Opening Vial is specifically designed to eliminate broken needles due to the increased target area. These vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with a graduated marking spot...

Used in applications where it is necessary to wash and re-dissolve the precipitate with chemicals that would attack standard filter paper. The 60º angle on the funnel permits removal of precipitates.

This vial is designed to work in Shimadzu and Waters WISP™ 48 position auto samplers. Choose from clear or amber borosilicate. These vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with graduated marking spots.

Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. Thermometer has a white back, a 6 to 7mm outer diameter, and a standard taper 10/30 inner ground joint. All ranges have 1º subdivisions. Immersion is measured from the bottom of the...

Designed for use with small quantities where hold up between the flask and receiver must be kept to a minimum. The thermometer bulb and stem serve as column packing. Upper hose connections are for cooling lines while the lower connection is for vacuum. Available with Vigreux indentations to improve...

Manifold is a low cost solution for the concentration of product in 96, 48 or 24 well blocks. Delivers equal amounts of gas to each well to gently speed solvent evaporation. Needles are constructed of stainless steel. 96 well unit has the needed pressed into the block, while the 11, 15, 24 and 48...

Cylinders are calibrated to contain at 20°C. Supplied without stopper. For standard taper stoppers see CG-3000. Tolerances and subdivisions are the same as CG-8242.

Beaker Covers, PTFE Designed to ensure safety and cleanliness in the lab environment, these PTFE beaker covers provide a durable and chemically resistant solution for protecting your sample integrity. Crafted from Polytetrafluoroethylene, they are ideal for use in a wide range of chemical,...

Kjeldahl shape facilitates heating and stirring while permitting easy transfer of liquids or solids. Lower portion of flask fits standard heating mantles. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap®...

Pre-assembled closure and septa minimize contamination from handling. Enhance your laboratory's precision and efficiency with the Chemglass Preassembled GPI 10-425 Septa Caps. These high-quality caps are designed to provide a secure seal, safeguarding your valuable samples and substances. Engineered...

Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the user’s thumb. Sprayer is used with low pressure air (5/PSI) or rubber pressure bulb. Sprayer consists of an...

Stainless steel spring used to connect apparatus having hooks. All springs have an enlarged 1/4" ID loop at each end for easy connection to almost any size hook. Diameter of the coils on all sizes is 0.190". Length listed is the length between the loops.

TLC Developing, Latch-Lid only

Similar in design to CG-1360 but with the addition of a 2mm PTFE stopcock in the return tube. Stopcock stops the flow after the extraction is complete. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake...

Chemglass Life Sciences offers a variety of vials for Agilent's LC instruments. Our 6mL vials allow for larger sample volumes and are recommended for G2258 Dual Loop and G1367 Well Plate Autosamplers Only. Caps are sold separately.   Magnetic Headspace Caps with Septa: (All Silicone is...

Inexpensive, tapered stopper provides for a tight, leak-proof fit while the top ring permits the stopper to be easily removed. Stoppers are made of yellow Polyethylene