Chemglass

Used with Viton O-Rings and threaded outer joints for making grease-free, vacuum tight seals on 14/10 MINUM-WARE® glassware components. The 8-425 size is used on the sidearm of Hickman still head and MW-81 GC collection vial, while the 13-425 is used on the MW-56 two neck flask sidearm.

Erlenmeyer flask with a standard taper outer joint. For stoppers see CG-3000. This set of Erlenmeyer flasks is designed with outer joints, offering a practical solution for a wide range of experimental procedures. The flasks' unique design includes a broad flat base for stability and a narrow...

Features: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  Supports Reactors from 300mL to 5L.  Removable Polyethylene Spill Tray.  Adjustable Middle Support Bracket is Vertically Adjustable. It Accepts Our 100 and 150mm...

Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa. 

Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large permanent white letters make the capacity clearly visible. Flasks are calibrated "To Contain" at Class A tolerances, per ASTM E288...

Chamber for use in drying small quantities of material in dram vials. Can also be used in the transfer of materials from glovebox to glovebox or to the vacuum line. Lower vessel has a flat bottom permitting it to be stood upright on the bench or in a glovebox. Top adapter has a 0-4mm Chem-Vac™...

Similar to CG-1728, but graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Supplied complete with listed size stopper. For replacement stoppers see CG-3018. Dimensions are the same as CG-1726.

Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping.” Traps have a 24/40 top outer joint and the listed size of lower inner joint.

Reservoirs used for storing high performance, low pressure liquid chromatography mobile phase. Complete reservoir system includes a plastic coated graduated bottle, a standard cap assembly, and solvent and sparging filters. Cap assembly fits GL45 threaded bottles and has a PTFE bulkhead with three...

Clear fused quartz socket joint. For clamps see CG-150.

Flasks are designed for culturing organisms that require a large surface area to volume ratio. Available with a plain 59mm ID neck, 38mm OD Delong style neck or GL-45 screw neck supplied with a vented cap.

Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and...

With a 40% larger opening, these vials are specifically designed to work in robotic arm auto samplers. They also incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with graduated marking spots, and silanized.

General purpose column having a PTFE stopcock, reservoir of the listed capacity and a top spherical socket joint. Glass wool (not supplied) is used to support the column packing. Column is constructed using MEDIUM WALL TUBING. Can be used as a gravity eluted column or a flash column (as described by...

   MINI FORCEPS, TWEEZERS, POLYSTYRENE 3 1/2-inch (90 mm) PS - polystyrene

Thermometer is mineral spirit filled to eliminate workplace and environmental hazards associated with mercury. Constructed on two types of tubing sealed together below the scale, where the stem portion is made of very fine bore glass to minimize correction factors at immersion depths other than the...

Similar to CG-1402, but with the height above the disc increased by 33% for greater capacity. Not recommended for use where pressure would exceed 15 PSI.

Blade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.

Reusable PTFE sleeve with knurled, reinforced gripping ring for easy removal. Sleeve has reinforcement ribs on the outer surface that provide a vacuum tight seal to 1 mbar and also prevent the sleeve from sticking. Sleeve is .008in thick.

Economical thermocouple gauge has fast response and high stability. Gauge is supplied either in a bench top case with handle or panel mount style. Gauge utilizes a 8-pin Hastings-Raydist DV-6M thermocouple gauge tube having a 10ft cord. Gauge tube is threaded with 1/8 " male NPT for use with...

Bonded closures feature clear PTFE/Silicone bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Closures are available in both pre-slit and non-slit designs

Blue polypropylene vented cap has a 0.22µm PTFE hydrophobic membrane to allow gas exchange while preventing contamination. They are autoclavable at 121°C. Must be used with our 70mm silicone gasket

PTFE TIPHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.