WTW
-
The WTW heavy-duty DO probe maintenance kit is the perfect kit to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories.
-
The portable WTW ProfiLine meter series is available in three (3) series versions, the 3110/3205-Basic series, 3210-Professional series and 3310-Advanced series, each with a distinct level of sophistication for the independent measurement of pH, conductivity, or dissolved oxygen. All versions have…
-
Alkaline Reagent
WTWThe WTW MZ/NH3/CN alkaline reagent is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is mainly used for cyanide measurements and alkaline solution. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Conductivity measuring cells with graphite electrodes in two and four pin models for standard measurements in aqueous solutions in the field and in the lab No measuring errors due to cable, polarization effects or changes of the electrical edge field Highest precision and linearity …
-
IDS ORP electrodes are used to measure oxidation or reduction potentials in waterous solutions - with integrated temperature sensor Safe measured values due to signal processing in the sensor Integrated temperature sensor NTC 30 kOhm for precise value documentation Best possible GLP…
-
Nitrification inihibitor, light protected bottle with content 25 ml. Concentration 5 g/l allylthiourea.
-
IDS Depth Probes
WTWMPP IDS – the digital multi-parameters (up to three main parameters) depth probes with built-in depth measurement to use in profile measuring Depth measurement of pH, conductivity, dissolved oxygen, turbidity - up to three main parameters simultaneously, including depth and…
-
Membrane-covered galvanic dissolved oxygen sensors to measure in water and waterous solutions - low-maintenance and no polarization time, required For instant measurement Easy air calibration with water vapor saturated air in the calibration vessel User friendly and long operation…
-
Chloride standard solution traceable to SRM from NIST NaCl in H2O 1000mg/l Cl Certipur®
-
pH/ORP electrodes are the most commonly used electrochemical sensors. At the same time, they provide the most sensitive measuring signals and must be serviced and calibrated on a routine basis. The concept of IDS sensors precisely takes effect here. Digital data transfer without interferences…
-
The StirrOx® G not only ensures the necessary flow with its stirrer, but also the mandatory mixing of the samples. It fits perfectly into the funnel of the Karlsruhe bottles or with a funnel set also in Winkler bottles.
-
Digital high performance multi-parameter device with three inputs for pH, ISE, conductivity and dissolved oxygen and comprehensive GLP functions Wireless ready Simultaneous measurement with three independent measuring channels Fatigue proof reading on brilliant color display …
-
The WTW buffer solution with a volume capacity of 1000 mL is mainly formulated in chemical laboratories for the measurement and analysis of sodium content in chemical samples. Application: For Sodium Measurements
-
The WTW MultiLine IDS series of meters are the first of their kind, redefining the way electrochemical measurements are conducted. The innovative, digital technology of the MultiLine IDS series eliminates the need for dedicated meters for specific parameter measurements; now, measuring is simply a…
-
Robust, membrane-covered galvanic dissolved oxygen sensor for applications in flowing waters, fish hatcheries, aeration basins and more fields. With screw-on protection. The special membranes achieve stable measured values, especially in the aeration basin and similar applications with strongly…
-
Nephelometric or transmittance measuring - The nephelometric measurement at 90° scattered light is advantageous for lower turbidity, whereas the transmission measurement at 180° is beneficial for medium to high turbidity values: With increasing turbidity, restray and scattering effects between…
-
The portable WTW ProfiLine meter series is available in three (3) series versions, the 3110/3205-Basic series, 3210-Professional series and 3310-Advanced series, each with a distinct level of sophistication for the independent measurement of pH, conductivity, or dissolved oxygen. All versions have…
-
All in one - one for all! photoLab® 7100 VIS of 320 – 1100 nm supports the fastest and affordable routine analysis via barcoded test kits for round and rectangular cuvettes. More than 250 methods are available for water analytics, galvanics and general lab analytics. Special…
-
Electrodes 4258A53 electrode allows ORP measurements to be performed with all WTW pH/mV meters. Requires 4258A57 cable for use with Inolab Meters.
-
Multi 3320: The Environmental Expert The Multi 3320 for measurement of pH, ORP, ISE, conductivity and dissolved oxygen (electro chemical) is a perfect meter for environmental applications in ground and surface water, aqua culture, waste water treatment plants and much more. An integrated ISE…
-
The spectrophotometer photoLab® 7600 UV-VIS combine routine analysis with spectral analysis and pioneering procedure OptRF. Menu-guided operation OptRF for standard parameters COD, NO3, NO2 in the outlet of municipal wastewater treatment plants Multi-layer AQA Application…
-
Technical buffering solutions for pH 4.01, pH 7.00 and pH 10.01: pH 4.01, pH 7.00 and pH 10.01 are available in the practical 50mL bottles as well as in 1L special bottles with dosing device and pour spout. The buffer 10.0 is a special case: It is only still suitable for…
-
pH/Cond 3320: Professional pH/conductivity meter with 2 inputs (DIN, 8 pin socket), backlit graphic display, for mobile application with data logger and USB interface. Single instrument including short instruction manual, CD-ROM and batteries, cable. pH/Cond 3320 SET 2: …
-
SenTix®: Standard electrodes with gel and precision electrodes with liquid gel electrolyte for pH measurements in lab applications and in the field Maintenance-free gel reference system across the entire product life Quick repsonse time by good connection to the medium for electrodes…
-
WTW offers decades of expertise in high quality, rugged conductivity cell technology, and now the new IDS conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors. Two models are available to cover the entire…
-
Armings with protective baskets made of stainless steel or plastic to use TetraCon® conductivity measuring cells as well as CellOx® oxygen sensors. Protection of the sensors against damage Robust design Easy mounting
-
OxiTop® IS
WTWRespirometric OxiTop® measuring system for BOD self check measurement with undiluted samples – measuring ranges up to 4,000mg/l BOD possible Simple handling without dilution series Data security by built-in measured value memory Suitabe for immediate use Complete…