The AREC.T is a digital heating magnetic stirrer with a white ceramic hot plate, that ensures excellent resistance to chemicals and scratches, is extremely easy to clean and is suitable for observing color changes (e.g. during titration, etc.). AREC.T is the first hot plate stirrer with an…

Digital magnetic stirrer guaranteeing continuous operations both at low and high speed. Designed to meet the highest requirement with exclusive programming options and safety.

Fully automatic Kjeldahl distillation unit, with external titrator connection, for your analyses concerning different applications such as determining ammoniacal nitrogen, protein determination, nitrogen content (Kjeldahl or direct alkaline distillation), nitric nitrogen (after reduction/Devarda),…

BOD Sensor is the innovative, mercury-free and extremely reliable solution for BOD analysis. Easy to handle, quick and easy to read. A microprocessor-controlled pressure transducer transfers the Biochemical Oxygen Demand value directly to the display: results are displayed directly in mg/l with no…

Effective performance for excellent dispersion, homogenization and mixing The OV 625 Digital incorporates cutting-edge technologies and high levels of engineering expertise, to guarantee high shearing force and excellent homogenizing, emulsifying, suspending and mixing performance for a wide range…

Single-position and two-position heating plates with aluminum top and temperature regulation Excellent Performance Uniform heat distribution with coated aluminum alloy heating plate Excellent resistance to chemicals Maximum temperature 370°C Accepts up to 15 liter…

The AREX 5 Digital is the perfect solution for temperature-sensitive laboratory applications where precise and accurate thermoregulation of the sample is required to ensure maximum reproducibility. The AREX 5 Digital can be connected to external probes Pt100 and Pt1000 or to the VTF for…

VELP Scientifica open circulating baths are designed for those applications where accurate temperature requirements are needed including sample preparation, temperature control and thermostating material testing and much more. Selection of Combination Circulator combines with 5 or 7…

The ECO 6 is designed to process 6 samples (200 ml test tubes, Ø 42 mm) simultaneously. Electronic temperature control ensures temperature regulation from ambient to 200 °C and the analysis time can be set from 1 to 199 minutes or continuous. A LED display shows the temperature and time…

Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods. High Performance Rapid analysis – 2 hours vs. 6 hours with manual systems Reliable results High reproducibility Back-pressure pump prevents…

The VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.

The FC S Series is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. FC S Series is available in two configurations: FC4S, with 4 independent positions FC6S,…

Thomas No. 1198F83: Stirring shaft with floating blades: The two blades that open as the speed rises generate an axial flow in the container, from the top towards the bottom. Particularly recommended for stirring in narrow-neck containers, e.g. flasks. Thomas No. 1198F84: Stirring shaft with…

The TX4 is a digital vortex mixer with adjustable stirring speed and two operating modes, sensor or continuous, for an outstanding repeatability. Thanks to the revolutionary IR sensor mode, an infrared system (IR) detects the presence of the test tube and the vortex mixer automatically starts…

Kit to connect UDK 149 to SI Analytics potentiometric titrators TL 5000, TL 7000, TL 7750, TL 7800 for higher sample throughput and direct output of the final result. Kit to connect UDK 149 to Mettler potentiometric titrators T5, T7, T9, G10S, G20S for higher sample throughput and direct output of…

The JLT Series is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. JLT Series is available in two configurations: JLT 4, with 4 positions JLT 6, with 6…

Hot plate stirrer with a square, white ceramic heating plate extremely resistant to corrosion and easy to clean.

The ROTAX 6.8 is suitable for waste treatment plants, waste-water treatment plants and laboratories involved in environmental analyses. An easy to use instrument with a digital display and speed settings ranging from 0 to 30 rpm. Precise and extremely safe, the ROTAX 6.8 offers excellent performance.

Entry-level Kjeldahl distillation unit for your analyses concerning different applications such as determining ammoniacal nitrogen, protein determination, nitrogen content (Kjeldahl or direct alkaline distillation), nitric nitrogen (after reduction/Devarda), phenols, volatile acids, cyanides and…

The MULTI-HS hot plate stirrers have a unique system of warnings: when the plate temperature reaches 50 deg C the display will show a residual hot plate message preventing potential burning. The Safety Lock feature avoids possible alteration of the working conditions or unintentional modification…

A wide range of consumables designed for accurate and reliable Kjeldahl analysis. The addition of a suitable catalyst, along with high temperature, have influence on the speed and the efficiency of the mineralization in Kjeldahl analysis. Achieving the highest level of performance in a…

VELP Scientifica has developed a range of peristaltic pumps useful for transferring liquids in industry sectors like pharmaceutical, food, biotechnological, chemical, beverage. Simple Operation Minimum maintenance (just replace the tube) Easy cleaning – no contact of liquid…

The FP4 is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. It is a portable model with four stirring places, designed to be used on-site, as it can be powered…

The Universal H-Stand ensures stability and compatibility with all VELP Overhead Stirrers. It is possible to adjust the stand in order to adapt it to an uneven surface.

The DLS is a digital overhead stirrer for medium-low viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs…

Solvent extraction system suitable for the separation of a substance or a group of elements from solid and semi-solid samples according to the Randall technique. Beats Ordinary Soxhlet Extractor Up to 5 times faster than traditional Soxhlet (hot solvent vs. cold solvent) Low…

Wide range of superior quality consumables for the day-to-day operation of your NDA. Large Choice High-quality quartz tubes, crucibles, tin foils Long-life and premium reagents and catalysts Calibration standards (EDTA, 9.57% N), o-rings, seals and fittings Quality…

The ECO 16 can be used to process 14 Ø 16 mm test tubes plus 2 Ø 22 mm test tubes simultaneously. Electronic temperature control ensures temperature regulation from ambient to 160 °C and the analysis time can be set from 1 to 199 minutes or continuous. A LED display shows the temperature and time…

Optimum solution for the acid/basic hydrolysis of food and feed samples prior to solvent extraction for total fat analysis. Improves Analysis Hydrolysis / digestion by acid or base Ensures conformity with AOAC standard No sample transfer – no sample loss Crucibles go…

Enzymatic digestion for dietary fiber analysis by enzymes heating. High Reliability Non-stop sample mixing for homogeneity Constant temperature, no overheating of samples Excellent accuracy of +0.2°C Digital timer for reproducible results Complete System …

The AREX 5 is a robust and versatile hotplate stirrer suitable for applications ranging from basic to temperature-sensitive where precise sample thermoregulation is required. The AREX 5 can work stand-alone or be upgraded to digital by connecting the VTF digital temperature controller. …

The VELP® SCIENTIFIC accessory is suitable for use with Kjeldahl digestion unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of these units. These products are made of materials which offer enhanced durability.