Polystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…

Polycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

Polystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…

2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

Mid-Size Cr-Free Grinding Vial Set: For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25…

Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

These cryogenic gloves are designed to protect the hands and arms from the hazards associated with ultra-cold materials. Highly recommended when operating the 6770 and 6870 Freezer/Mills. These multi-layer-insulated gloves are lightweight and flexible, allow excellent dexterity, and are comfortable…

Microvial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground…

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…

Shallow, thin-walled aluminum cap for reinforcing XRF pellets. Commonly used in the production of pressed power sample disks for XRF but also used for OES and other analytical techniques. Forms the bottom and sides of the finished pellet. Features Makes sample disks easier to remove from…

Pre-flared, shallow, thin-walled aluminum cap for reinforcing XRF pellets. Commonly used in the production of pressed power sample disks for XRF but also used for OES and other analytical techniques. Forms the bottom and sides of the finished pellet. 31 mm wide x 8 mm deep. Produces pellets 31 mm x…

Kapton® thin window film for XRF liquid sample cups. 0.3 mil (8µm) thick. Supplied as continuous roll 2-7/8 in. (73 mm) wide, 50 ft. (15 m) long. FEATURES Often considered the closest thing to a “bombproof” XRF window film Incredibly strong and heat resistant…

Acid washed grinding beads are treated to remove fine particles and contaminants. Sold in package of 100.

Frosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…

Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

Deep-well reinforced titer plate with a 96-well format. Each square well has a volume of 1.4 mL and a working volume of 1.0 mL. Compatible with our 2010 Geno/Grinder due to the toughened wells that withstand bead beating. This plate can also be used with the 1600 MiniG.

Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

Disposable closed X-ray cell with collar used throughout theworld for fast, dependable, reproducible running of liquidsamples in XRF spectrometers. Includes a polyethylene snap-ringand cup with snap-post vent and reservoir. Requires thin windowfilm. Sold in bags of 100. Features …

Square well sealing mat specifically designed for the 2205 96-Well Reinforced Titer Plate. Sold in package of 50.

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls.

The Cryo-Blade™ is an ultra high-capacity cryogenic grinder for sample preparation and processing of up to 1 kg of sample. The Cryo-Blade automatically dispenses liquid nitrogen to allow the sample to reach cryogenic temperatures and then activates a grinding phase to pulverize samples,…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

6906 Short Cryogenic Transfer Hose: 4 ft. (1.2 m) long flexible stainless steel hose suitable for transferring cryogenic fluids such as liquid nitrogen. Fitted with a 3/8 in. (9.5 mm) NPT male fitting on one end and a CGA295 female fitting on the other end. Compatible with the 6905 Portable…

Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

NOTE: These products are only available for sale to Domestic U.S. Customers.

13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.