Each Chamber is an anodized aluminum block. Excellent temperature conductors. Use with hot plates or with our Ice Pans & Ice Buckets. NOTE: Does not fit CoolSafe System; use separately

‘KEEP YOUR COOL’ - Reagents are kept at ~5°C for approximately 3 hours NO MESS - No more messy ice baths, frozen nontoxic gel is contained in a sealed molded cavity. EXTRA TIME - Extends safe working time temperature sensitive reagents

Pre-cut, peel-off, labels sized to fit microcentrifuge tubes Tubes with tags slide easily in and out of rotors Chemically inert polyester Will not dry up or fall off Easy to write on Smear resistant Microcentrifuge Tube Tough-Tags withstand steam-autoclaving, boiling…

A convenient holder for a microplate, tilted at a 30° angle to comfortably view samples and pipette without strain. Each stand has a neoprene pad and rubber mounting to prevent slippage of the plate and stand.

Unique "trough within a trough" maximizes reagent recovery Convenient pour-off spouts on all four corners A wide base provides stability and avoids spills Graduated marks on inside wall Superior design provides stronger sidewalls Sterilized by gamma irradiation …

Holds 5 standard pipettes and 2 multi-channel pipettes Multi-channel pipettes store on the side and are held in place by spring-loaded clasps Upper portion holds up to 7 rolls of Cry-Tags® and/or Tough-Tags® and can also hold frequently used items such as markers Four section…

Gel Drying Frames allow researchers to quickly and easily dry gels between two sheets of cellophane without the use of expensive heat/vacuum gel dryers. The 24 x 24cm frames allow for drying of larger format gels, while the 14 x 14cm frames are ideal for mini gels and other smaller formats.

Thermal Transfer Labels for Storage in Temperatures from -40°C to 150°C For Use with Thermal Transfer Printers Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance Specially coated for use with a resin ribbon that provides the best…

Permanently label mutliple microplates with clear Well Orienter Stickers. Each well is clearly marked with its corresponding row number and column letter for easy cross-referencing. The paper backing is scored in the middle allowing for easy aligning on the underside of the plate.

Durable and thick (4.4mil) yet easily pierced with a pipet tip Prevents well-to-well contamination, sample spillage and evaporation Polyethylene film that provides excellent adhesion to plastic microplates Non-cytotoxic, sterile, solvent resistant and waterproof Stays solidly in place…

Chemically inert polyester Will not dry up or fall off Easy to write on Smear-resistant Sidewall Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling.…

Stickers for labeling petri dishes PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the label's protective backing…

Use for labeling samples stored at room temperature and not exposed to chemicals and/or caustic agents. Teeny Writers are perfect general use lab markers. Thomas No. 1221R53 : The "Original Teeny Writer" has an extra fine tip. Recommended for writing on all our labels for samples…

?Screw-down frames go together faster than ever Frames can be screwed together while sitting flat on a bench, further prevent damage to gels Large wingnuts tighten easily and create even pressure for holding gels 14 x 14cm and 24 x 24cm sizes available Kit Contents: 2 frame sets, 8…

Easy-to adhere stickers have side-by-side 20 x 20mm grids (1mm squares) for microscopes slides Virtually all cells and specimens placed on top of Slide-Grids can be counted and/or sized Use with dry specimens or suspended specimens Inert and stable under most laboratory conditions

Permeable and inert Reusable after cleaning Can be cut to size with scissors Can be used as a permeable stacking spacer and support for gels during stain and destain procedures Polypropylene mesh is approximately 1/3 mm thick with 1 mm strand spacings and approximately 70% void volume. This…

Durable - Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable Super Insulating - Preserves ice up to 30% longer than conventional ice pans Stackable - Designed with an inner edge enabling the pans to stack on top of one another for easy…

Prevents well-to-well contamination, evaporation and spillage Ideal for PCR applications, RNase and DNase free Strong 2.3 mil thick polyester film Non-cytotoxic and sterile Functional from -40°C to +125°C Two scored end tabs for easy positioning

Our label sheets are specially designed to permanently accept laser printing. We offer several different sizes in a variety of colors.

Universal, three position acrylic stand with neoprene pad for supporting tube racks. Fixed angles at 25°, 35°, and 45° Size: Holds racks up to 5.50” high and 8.50” wide Ideal Uses: Holding tube-filled racks at a comfortable positing for easier pipetting

Tough-Spots are chemically inert and flexible white and colored polyolefin labels that adhere to most plastics as well as glass and metals. These labels withstand temperatures from +100°C to -196°C (vapor and liquid phase nitrogen storage, up to moderate oven temperatures) and can…

Gas permeable sealing membranes for microtubes Multiple uses Thermal and chemical stability Centrifuge compatible Gamma irradiated Breathable Breathe-Easy and Breathe-Easier microtube sealing membranes offer two rates of gas exchange to meet your requirements for cell…

Fine Detail: Print text & barcodes with 300 DPI resolution, Easy to Use: Comes with Label LIVE design software for Windows and macOS, Easy Adjustment: Fully adjustable sensor for use with a variety of label sizes, Wide Print Width: Full-size print up to 4" (102mm), High Capacity: Fits roll…

Label Size: 1.28" x 0.50" (33mm x 13mm) Ideal Use: 0.5ml tubes Sheet Layout: 5 across - 17 down Labels/Sheet: 85 Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack" U of M: 2,125/pack Rainbow Pack: 1 includes 5 sheets of each color: Blue, Green,…

1177Z78 Standard soft rubber brayer Creates uniform seal 1177Z79 Deluxe firm rubber brayer Even distribution of force Thumb pockets for better control Ergonomic handle

Our label sheets are specially designed to permanently accept laser printing. Sheet Size: 8.5" x 11" (216mm x 279mm) Ideal Use: Cut to Size U of M: 20 sheets/pack

Top loading Secure Cutting edge The Tough-Tags Station securely holds up to six standard size boxes of Tough Tags. It's top loading so users can easily insert rolls or remove empty boxes. A specially designed top rail holds tags securely in place. Built-in cutting edge allows easy liner…

The Autoradiography Ruler Set (ARS) is an orientation and measurement device that exposes metric ruler markings directly onto x-ray film. By means of a specially formulated phosphorescent dye compund and a unique emission filter, the ARS serves as an ideal non-radioactive substitute for radioactive…

Biodegradable - Using a special additive to PET, our reservoirs will safely degrade over time. 100% Eco Friendly - Each case of Bio-Pure Reservoirs are packed in bio-degradable bags and recycled cardboard cases

Label Size: 1.625" x 0.625" (41mm x 16mm Ideal Use: General Purpose Sheet Layout: 4 across - 16 down Labels/Sheet: 64 Colors: White U of M: 1,600/pack