MISC2

316L stainless steel compression fitting for use with 1/4" tubes. Useful for addition and withdrawal of contents from bioreactor vessel. Can fit 10mm port on 3L and 7L metric bioreactors. Specifications: 316L Stainless Steel Fits 10mm Port Size: 1/4"

PD 98059 (PD98059) | CAS 167869-21-8 | Calbiochem | 25MG

Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate. Specifications: 316l Stainless Steel Finish Ra 32 Or Better...

The Bellco Low Profile Brushless Digital Roller Drum Drive is an all purpose roller drum for blood, tissue culture, cells and virus applications. The standard speed ranges are 0.5 to 15 (7736-61115) and 2 to 60 RPM (7736-51115) with other speed ranges available as custom items. Two drums are...

Standardized sorbents ensure reliable results every time. EMD Millipore’s broad spectrum meets all kinds of needs. In TLC, silica gel 60 sorbent is considered the most versatile. Our assortment of silica gel 60 features different grades with particle sizes ranging from 5-40 µm: silica with a gypsum...

30 Laboratory Hood Fiberglass 30 Laboratory Hood; bypass airflow design; one piece molded, corrosion-resistant fiberglass exterior liner; 3/16" thick clear tempered vertical-rising safety glass sash, pivoting air foil; right side fixture panel factory-prepared to accept up to three service fixtures,...

Crafted with precision, the Sodium Chloride Conductivity Standard ensures accurate calibration for conductivity meters. It is particularly beneficial for researchers and scientists who require precise measurements of electrical conductivity in various solutions. With a conductivity of 10 S/cm, this...

For standard base unit only. Roller drum accepts 30mm tubes, 128 tubes per drum. For those in need of a robust and efficient solution for mixing or agitation in laboratory settings, look no further than this 128 Position Roller Drum. Designed to accommodate 30mm tubes, it offers a generous 18...

This peptide is a 29 amino acid fragment generated from rabies virus glycoprotein (RVG). This peptide specifically binds to the acetylcholine receptor expressed by neuronal cells.

Melittin, a 26-residue bee venom peptide, is known to induce murine antibodies specific for its hydrophilic C-terminus of residues 20 to 26 and T-cell responses specific for its hydrophobic mid-region. This peptide is an anti-inflammatory agent, it inhibits the lyme disease spirochete.

Synonyms: 2′-Deoxyadenosine 5′-triphosphate sodium salt solution; dATP Purity:<0.9 % (dndp); 99% (dntp) storage: −20°c unspsc code: 12352200 ridadr: nonh for all modes of transport application: quality function tested in rt-pcr. tested for absence of contaminating...<>

SPME INJECTION SLEEVE, 0.75MM ID PK5

Formic Acid, Technical - 500 ml

Stainless steel blade holder mounted on plastic covered stainless steel handle and is fully autoclavable. 5/8 X 1/4" BLADE X 7 3/4" HANDLE. Size: small

 HTS Accessory Tray,12" x 12" for Micro-plates.   Specifications:          Dimensions: 30 x 30cm        Holds 24 Micro-Plates        

Offered by MilliporeSigma, this (+/-)-cis-3-Methylfentanyl hydrochloride solution presents a powerful tool for precise scientific analysis. Contained in a convenient, 0.5 mL ampule, this solution of 100 µg/mL in methanol serves as an excellent reference material for a variety of applications...

This offering is a 10mg quantity of Aprotinin, a potent proteolytic enzyme inhibitor. Renowned for its ability to slow down fibrinolysis, it plays a pivotal role in the prevention of blood clot breakdown. The 10mg format ensures sufficient quantity for various laboratory applications, all the while...

Cooling Valve Assembly Specifications: 1 Valve Model, 230v Supplied With: Plastic Hose Connector (1 Per Valve) Push Fitting (1 Per Valve) M3 X 5 Screw & #5 Int. Lock-Washer (2 Per Valve) (1) Stainless Steel Base Plate (4) Rubber Feet (1) Solenoid Valve Sub-Assembly

Multipacks are the most economical way to purchase the most commonly used syringes. They are shipped in a convenient box offering maximum protection during transport and storage.

Manufactured from 316L stainless steel with electropolish finish.   Specifications:          Material: 316l Stainless Steel With Electropolish Finish        Dimensions: 1/2"X 7...

Provides Automatic Switching From Main Tank To Auxiliary Tank Rear Panel Has Hose Barbs For Gas Connection 9x5x7" Mounts On Top Of Any Standard Co2 Incubator Alarm Sounds When Tank Pressure Drops Below 5 Psi Do Not Exceed 50psi. Operating Instructions: Tun On The Power Switch Located On The Back Of...

These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon, vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silicone gasket. Specifications: Designed For...

Adjustable anti-foam probe works by conductance. Rising level in bioreactor contacts the probe to trigger the controller for addition of anit-foam or addition / withdraw of media to maintain proper liquid level. Fits into 18 mm port on 3L metric head plate. Supplied with nut, washers and o-rings....

PERKIN ELMER INLET LINERS - For Perkin Elmer Autosystem, 6.2 mm O.D. 92 mm Length High temperature deactivation Manufacturer’s guarantee to fit Economically priced All liners are manufactured to the original equipment tolerances and are deactivated using a proprietary high temperature gas...