Delicate Lab Cleaning Wipes

Ultimate 60™ are a light weight 100% polyester cleanroom wipe with laser sealed edges. The heat of the laser beam cuts and melts each fiber along the edges, therefore reducing the chances of particle emission. Each wipe is laundered in a class 10 cleanroom, individually inspected and sealed in...

Nonwoven hydroentangled polyester/cellulose blended wipes Dispensed from center-pull roll in a reusable canister Presaturated wipe refills are available Strong and durable Low levels of particles and extractable contaminants Each package is individually lot numbered Applications Excellent wipe for...

TechniCloth wipers are fabricated from a hydroentangled, nonwoven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic wiper. With its low particle counts, low extractable levels and...

Clean Room Hydrophilic super absorbent foam wiper is ideal for screen cleaning applications in Solar Cell Production UltraSORB Wipers are highly absorbent wipers that combine excellent ESD characteristics with Class 100 cleanliness. Due to its sponge-like wiping capability, fiber-free construction...

Tabbed base holds box in place Mounts horizontally or vertically Clear acrylic plastic Small holders can be used with small Kimwipes® and large holders can be used with large Kimwipes and Kaydrys®. Dimensions: small: 5 1/4” W x 5” L x 3 1/4” D; large: 5 1/4” W x 12...

PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 µm filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in a reclosable slider bag, PolySat is convenient for cleaning sensitive surfaces in controlled environments.

TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while...

M1 polyester knit wipes are made with a hi strength continuous filament polyester yarn in a double knit, no run interlock pattern. A unique quilting pattern is used in the 2-ply polyester wipes for optimum contamination & liquid holding capacity, resulting in the most absorbent, clean &...

M1 polypropylene wipes are made from pure, lint free & chemically inert 100% meltblown polypropylene with Isopropyl Alcohol & WFI (Water for Injection) in precise saturation level provide excellent wipe down/pick up with economy in mind. This material & chemistry has excellent...

The C30 Cleanroom Wiper is a nonwoven, hydro-entangled wiper made of 55% cellulose and 45% polyester. It is soft, absorbent and the material is low linting. The extractables are 0.110 for deionized water and 0.171 for isopropyl alcohol. Wiper sizes come in 4x4, 6x6, 9x9, 12x12, and 18x18 and...

M1 Technology Sealed Border, Class 10 Polyester Knit Wipers Basis Weight: (g/m2) 138 Weight Balance Thickness (mm) 0.50 Caliper Sorptive Capacity Intrinsic (mL/g) 2.88 IEST-RP-CC004.3-8.1 Extrinsic (mL/m2) 413 IEST-RP-CC004.3-8.1 Extractables (mg/g) DI Water, DIW 0.0079 IEST-RP-CC004.3-7.1.2...

The ChemWipes are surface wipes for the detection and quantification of toxic chemicals on surfaces. The ChemWipes are available for: Aromatic diisocyanates e.g. toluene 2,4-diisocyanate (2,4-TDI), toluene 2,6-diisocyanate (2,6-TDI) and 4,4'-methylene diphenyl diisocyanate (MDI) Mercury and...

Synergy is an especially effective wipe. It is tough, abrasion resistant, very absorbent, and virtually free of particle generation. It is comprised of a synergistic blend of virgin polypropylene and cellulose that is layered and ultrasonically bonded into a uniform, super-tough layered fabric....

For cleaning optics, wiping up spills or dying delicate labware 100% pure cotton, clean, absorbent and non-abrasive Will absorb six times their own weight of solvents and aqueous solutions Reagent grade quality Meets all lab requirements Lint-free 9 inch squared 8-ply pad (2904A20) unfolds to 18 x...

Wipes, M1-Technology (E) CR Microfiber 70% Polyester, 30% Nylon Yarn 9" x 9" Sealed Edges Cleanroom 100 Laundered and Double Bagged Flat Packed Precision Cleaning of fine surfaces for glass, stainless and optics, 231gm/m2 basis weight.

Non-Woven Microfiber Pre-Sat Wipes: 80G/M2 Non-woven mechanically split microfiber sustrate compatible with ISO Class 5-6 (Class 100-1000) environments, Clean cut edges, Pre-saturated with ultra pure 70% IPA/30% DI Water, Best choice for contaminant "pick-up" and abrasion resistance in...

Non-woven cloth Cleans eyeglasses Strong cleanroom grade non-woven cloth is soft and lint-free Individually dispensed wipes are handy and ready for instant use Packaged 100 per polyethylene canister; reclosable container

The Polynit Wipe is made from filament polyester and is knitted in a special stitch which reduces degradation of the wipe and subsequent particle generation. The Polynit Wipe is specifically designed for ISO Class 5 or cleaner environments and is exceptionally low in particles and extractable...

ValuClean® Plus is a hydroentangled rayon/polyester nonwoven recommended for ISO Class 5-8 environments. It offers exceptional absorbency, durability and cleanliness at an economical price point. Due to its 50% rayon content, ValuClean® Plus has best-in-class absorbency, reducing actual wiper usage...

Soft-Tech® wipers feature a soft crepe finish which enhances pick-up and absorption. They are also low linting, which reduces surface contamination. The wipers come in portable dispensers with a split-film cover that protects the wipers from outside contaminants, while reducing lint and...