Chromatography Vials

Chromatography Vials

Products (661)

Compare Tool

Select up to 3 products

  • Headspace Vials & Cap

    Agilent Technologies

    Headspace vials and caps are used in headspace gas chromatography analysis because of their ability to withstand the pressure from gas. Agilent headspace vials come in two basic sizes (10 mL headspace vials and 20 mL headspace vials). Both flat bottom and round bottom styles are available for use in...

  • 11 mm Poly Crimp Seals, Molded Septa

    For use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the vial neck...

  • Round Bottom Headspace Vials

    Agilent Technologies

    Crimp top Use with 20 mm crimp caps Two sizes: 23 x 75 and 23 x 46 mm Round bottom glass headspace vials feature a 20 mm beveled crimp top that creates a much tighter seal than you get with a flat crimp surface. Vials are designed for use with Perkin-Elmer, Tekmar and Varian. Vials are heat annealed...

  • Standard Opening Screw Top Vial Kit

    The Agilent Technologies standard opening screw top vial kit includes black 8 mm cap features polypropylene construction. The bi-layer septa layering features PTFE/silicone construction and has GC, GC & GC/MS, LC, LC & LC/MS technique. This product is only available to U.S. Domestic Customers. For...

  • Vials, pre-cleaned and assembled

    Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows:1. Wash containers in hot water using laboratory grade non-phosphate detergent.2. Rinse three times with copious amounts of tap water to remove detergent.3. Rinse three times with ASTM Type I...

  • Screw cap, phenolic

    MilliporeSigma

    Screw caps (black phenolic hole cap, for use with 7 mL vial with 15-425 thread) are available as hole caps for use with sealing septa. Caps are offered in phenolic resin. Phenolic hole caps can withstand a maximum temperature of 149C.

  • Headspace vial, beveled top, rounded bottom volume

    Headspace vials are available in several sizes. The style and diameter of headspace vials depend on the autosampler. Vials with rounded bottoms are sturdier and more resistant to pressure than the flat bottom vial. The rounded bottom version was created to allow the vial, when transported by a...

  • VIAL 0.8ML CLEAR PP

    National Scientific
  • 2 mL, 11 mm Crimp Top Vial with PTFE/Red Rubber Closure-Kit

    Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Crimp Top Vials and 100 preassembled Aluminum Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack.Guaranteed for fit and compatibility,...

  • Screw Top Vial

    Agilent Technologies

    The Agilent Technologies 2 mL clear screw top vial has a borosilicate glass construction with low metal content and is used for safeguarding samples from destabilizing or leaching. The unique thread design of the vial ensures a watertight and airtight seal, sold as 100 per pack. This product is only...

  • Crimp Top Vial & Cap

    Agilent Technologies

    The Agilent Technologies 2 mL clear crimp top vial and cap features a wide opening that helps in targeting larger samples. This vial is packaged safely to avoid breakage and contamination, sold as 100 per pack. This product is only available to U.S. Domestic Customers. For research use only, not to...

  • Vial Kit

    Agilent Technologies

    Agilent vial kit, for Waters, includes screw top vial (12 x 32 mm), 2 mL, 9 mm, clear, write-on spot, cap (12 mm) with preslit PTFE/silicone septa, similar to Waters 186000307C, National Scientific C4000-95W, Chromacol MEL, La-Pha-Pack 11 23 1051. Application: For Waters This product is only...

  • Vials, screw top

    MilliporeSigma

    Application: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.

  • Inserts for 2 mL large opening vials

    Insert fits 12 x 32 mm vials with large opening (6.0 mm)

  • Vials, screw-top

    MilliporeSigma

    Graduated. Autoclavable borosilicate USP Type 1 glass. PTFE faced rubber septum. Legal Information: V-Vial is a registered trademark of Wheaton Industries, Inc.

  • Storage Vial Kit

    Agilent Technologies

    Agilent 4 mL screw top glass vial, 12 mL screw top glass vial, 22 mL screw top glass vial, and 40 mL screw top glass vial storage vial kits contain screw top glass vials constructed from Type 1 borosilicate glass. Available as both clear glass vials or amber glass vials, open top screw caps with...

  • Crimp Top Headspace Vial

    Agilent Technologies

    Headspace vials and caps are used in headspace gas chromatography analysis because of their ability to withstand the pressure from gas. Agilent headspace vials come in two basic sizes (10 mL headspace vials and 20 mL headspace vials). Both flat bottom and round bottom styles are available for use in...

  • Screw neck vials, N 18

    Screw neck vials for storage of liquid samples (8 mL, 12 mL, 16 mL, 24 mL) Normally used in combination with closed top screw caps Sample container available for the 8 and 12 mL screw neck storage vials For vials >= 20mL please also refer to screw neck vials N 24 with their appropriate closures...

  • Wide Opening Crimp Top Vials

    Agilent Technologies

    40% larger opening than standard narrow opening vials 12 x 32 mm Tightly controlled crown for improved crimping Precision-formed neck designed for optimal robotic arm handling The wide opening crimp cap provides a larger taget area for improved autosampler needle accuracy. Select from four cap...

  • Insert for 2 mL standard opening vial

    Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

  • 8-425 Screw Caps with Septa

    Agilent Technologies

    8-425 Screw Caps without Septa (2714S28) Open top polypropylene screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) Open top...

  • 2 ml Vial Caps/Septa

    Agilent Technologies

    Agilent 2 mL crimp top vials are crimp vials constructed from type 1 borosilicate glass. The unique low metal content nature of the high-quality material can help to protect your sample from destabilizing or leaching. Our associated crimp vial caps come with a choice of either PTFE/silicone, PTFE...

  • Screw Top Vial

    Agilent Technologies

    The Agilent Technologies 2 mL clear screw top vial has a borosilicate glass construction with low metal content and is used for safeguarding samples from destabilizing or leaching. The unique thread design of the vial ensures a watertight and airtight seal, sold as 50,000 per pack. This product is...

  • Screw Cap with Septa Vial

    Agilent Technologies

    The Agilent Technologies screw cap with septa vial and a write-on label is used in laboratories and the wide opening of 9 mm ensures operational flexibility. Application: For Wide Opening (9 mm) This product is only available to U.S. Domestic Customers. For research use only, not to be used in...

Compare Tool

Select up to 3 products