Test Tube Racks

Compact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")

Reusable Micro centrifuge Tube Racks are manufactured in a state of the art molding facility using high purity virgin Polypropylene (PP). These racks hold a 12 x 8 array (96) of 1.5 and 2.0ml micro centrifuge tubes on one side with smaller positions (80) for the 0.5ml with a 16 x 5 array on the...

A rack for every application Quickly change tube sizes with this adaptable polypropylene rack. Open the iris with a turn of the knob or directly insert a tube into the opening. Holds up to 12 similar size tubes. Imprinted references for easy identification. Generously-sized handles for easy...

Labcon 24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5mL and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in...

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for...

Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Station(H0381): Holds up to four wash bottles; Rotates 360° degrees;...

Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format.  One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes.  Autoclavable racks are alpha-numerically labeled and...

Dimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples to be incubated at the same temperature...

Manufactured in a state of the art molding facility using high purity polypropylene. These workup PCR racks are easily stackable and can accommodate non-skirted, semi-skirted, and skirted 96 well PCR plates. It can also accommodate strip PCR tubes and have molded alphanumeric indexing for fast and...

Racks are for 100-Cell Hinged Top Plastic Boxes. Drawer Racks allow an easy access to fewer microtube boxes at a time thus protecting other samples in the rack from warming up. Constructed of corrosion resistant stainsteel.

For Micronic:  Roborack 96 format Extra High Cover (H=3 7/17"/88.5mm)   For Fluidx:  48 Forat for Cryo Tubes with Tall Profile Lid (H=3 7/16"/88.5mm)

Adjustable shelves to fit any plate or tube rack Color-coded top and sides for easy identification Locking bar keeps plates secure For chest and upright mechanical freezers or incubators Autoclavable

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Molded in polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.

Tubes are made of autoclavable polypropylene and are available either individually or in strips of 8 or 12 detachable tubes. Tubes have a gross volume of 1.2 ml but with a cap in place, they will hold 1.1 ml. Caps are made of polyethylene and are not autoclavable. They are available individually and...

ABS SSC Class Includes 6 Canisters  Total 2ml Vial Capacity: 210  Liquid Nitrogen Capacity: 20.5 Liters  ½ CC Straw (1 Level Bulk): 1122  ½ CC Straw (10 Cane): 720  Static Evaporation Rate (Liters/day): 0.09  Normal Working Time: 135 Days  Neck...

Upright Freezer Racks for 25-Place Slid

For Micronic: Loborack 96 with Standard Cover(H=1 1/4"/31.7mm)  Loborack 96 with High Cover(H=1 1/2"/38.7mm)  For Fluidx: Low Profile 96 format rack for 0.5ml and 0.75ml tubes with Stadard Profile Lid(H=1 5/16"/32.9mm)  96 format with Protective Jacket with Lw Cover(H=1...

Racks are for 50-Cell Hinged Top Plastic Boxes. Drawer Racks allow an easy access to fewer microtube boxes at a time thus protecting other samples in the rack from warming up. Constructed of corrosion resistant stainsteel.

Thermo Scientific™ Nalgene Polypropylene Floating Microtube Racks are especially used in genetic cloning, microbiology and immunology labs. Offers excellent temperature resistance from -70° to +100°C (-94° to +212°F). Thaw, cool and incubate samples at elevated or reduced...

PREMIUM QUALITY || Test tube rack featuring a sturdy epoxy-coated steel construction that will stand up to the wear and tear of the lab ACCOMMODATES 20 TEST TUBES || Supports up to 20 test tubes that measure up to 20mm in diameter - Provides convenient insertion and removal of tubes. Rack measures...

Disposable 8-Hour Sampler Lines Maximise storage space and maintain an organized laboratory environment with the Upright Stainless Steel Freezer Rack for SBS/ANSI Footprint Tube Racks. This durable rack is designed to accommodate tube racks that comply with the SBS/ANSI footprint standard, ensuring...

12mm Test Tube Foam Rack. Color: Blue 50 tube capacity

Will not rust or deteriorate in water baths or CO2 atmospheres. Available in a variety of configurations for all popular tube sizes. Minimal of 5 is required. Specifications: Material: Stainless Steel Each Opening Rack 9/16" Tube Sizes: 13mm, 16mm, 18mm, 20mm, 22mm, 25mm, 38mm

Polypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by pushing the rack...