Test Tube Racks

Drying Rack, Pegboard, Acrylic, Glassware Our acrylic pegboards are made out of 3/4" thick clear acrylic. Pegboards can be supplied with a frosted back to diffuse light, if desired. Pegs are available in white or black and in three different lengths. Bevels can be added at the bottom to pitch water...

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 13/16? (20.6 mm) Tube Size: 18mm Spacing: 4x6 Holds 24 Tubes Dimensions: 5 1/2" X 3 3/4" X 3" Minimum...

Racks feature handles at both ends to accommodate freezers with right- or left-handed doors. Drawer racks facilitate access to samples without having to remove the entire rack from the freezer. Easily retrieve sample boxes by simply sliding out the individual rack drawer and then sliding the boxes...

The 80 Well Micro Tube Racks are designed with 80 wells in a 16 x 5 configuration with each well numbered for convenient sample identification. Rack dimensions are 9"L x 2-1/16"D with a well diameter of 10.5mm. Available in 9 original colors plus 5 fluorescent colors, this assortment of...

Meet your tracking and packaging requirements for solid or liquid sample storage with Thermo Scientific™ Nunc™ Low-Profile 5.0mL Externally-Threaded Universal Tubes. A robust solution for solid or liquid sample storage, tubes feature 2D barcodes, graduations, a white patch for labeling,...

Racks feature handles at both ends to accommodate freezers with right- or left-handed doors. Open configuration lets you store a multiple combination of box sizes Easily access boxes from either side of rack Sturdy corrosion-resistant stainless steel construction for long-term use Limited Lifetime...

Corning CoolRack thermo-conductive tube modules eliminate variability which originates from tubes placed directly into ice, dry ice, alcohol baths, water baths and other temperature sources. Place the CoolRack module directly onto a temperature source between -196°C to >100°C and it will...

These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special blend of...

The Clinical 4-Way Tube Rack is the only tube rack specifically designed to hold round, flat & conical blood collection and culture tubes. It holds multiple tube sizes without multiple racks.  

The ideal solution to store cleanroom booties or shoes. Stainless steel Super Erecta shelving combined with rods and tabs allow you to create customized compartments to fit your needs.Load capacity: 2,000 lbs.

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 9/16? (39.6mm) Tube Size: 38mm Spacing: 3x4 Holds 12 Tubes Dimensions: 6 3/4" X 5 1/8" X 5" Minimum...

Chest Freezer Rack for Matrix Boxes, Capacity 10 Boxes

Reusable Polypropylene (PP) multi-combination Freezer racks have 24 places in a 6 x 4 Array for 0.5ml, 1.5ml - 2ml size micro tubes. These can maintain the temperature of less than 4°C for almost 3.5 hours at room temperature and are fully autoclavable. These racks can be used for transportation of...

Polypropylene racks contain grids on both sides. One side holds 1.5/2.0ml microcentrifuge tubes with extra smaller positions for 0.5ml tubes, and the other side holds 0.5ml microcentrifuge tubes with extra positions for 1.5/2.0ml microcentrifuge tubes. The 96 place rack contains 12 x 8 arrays. The...

Clear, TPX® rack with polypropylene posts securely holds up to fifty-four 100mm Petri dishes. Shipped flat, they can be assembled in minutes. Easily viewed through the clear base and divider Dishes can be removed with one hand Built-in handle provides easy transport Rubber feet help prevent rack...

The Reversible 96-Well Tube Rack has easy-to-grasp tabs for sample handling and storage. Accommodates 96 wells for 0.5 mL tubes on one side and 96 wells for 1.5/2.0 mL tubes on the reverse side New vibrant colors! Raised rings around the 1.5 to 2.0 mL wells make tubes easier to remove Molded Grid...

Ice Rack™ - detachable lid, tube platform, and base, numbered cavities, 6/cs 72 × 0.5mL tubes accepts snap cap and screw cap 0.5mL to 0.65mL tubes 72 × 1.5mL tubes accepts snap cap and screw cap 1.5mL to 2.0mL tubes 100 × 1.5mL tubes accepts snap cap and screw cap 1.5mL to...

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 9/16? (39.6mm) Tube Size: 38mm Spacing: 4x6 Holds 24 Tubes Dimensions: 10" X 6 3/4" X 5" Minimum Requirement:...

Works with Denville 81 & 100 place Hinged polypropylene cryo vial boxes, R8110 and R8310 series

Increased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.

Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part 1910.1030...

Thermometer Rack. Suitable for holding up to 25 thermometers in the correct vertical position, thus avoiding mercury separation, which may occur when thermometers are stored improperly. Manufactured from 1/4" high density polyethylene, the rack is sturdy and will not tip. Sides have large...

Lower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;...