Test Tube Racks

Flame Retardant Color: Charcoal Long wearing Chemical and solvent resistant Float on H20 bath with full tube and sample Ideal for refrigerated or frozen storage samples All tubes can be decanted simultaneously Low profile: Will not tip over easily Lightweight: Weighs less than two ounces Holds and...

Polypropylene rack is designed to hold six Nessler cylinders. Flat lower deck is white to provide a reflective surface. Chemical and corrosion resistant rack can be autoclaved at 121°C (250°F).

PREMIUM QUALITY || Test tube rack featuring a sturdy polypropylene construction that will stand up to the wear and tear of the lab. Comes in blue or white color ACCOMMODATES 6 TEST TUBES || Supports up to 6 test tubes that measure up to 25mm in diameter - Provides convenient insertion and removal of...

Securely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height Requires two...

Keeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C...

These rugged autoclavable storage boxes are molded in polycarbonate, and can be used at temperatures of -150°C to 121°C. Designed to hold 100 each 0.5ml microcentrifuge tubes, or 64 each 1.5ml tubes. The numbered grid on transparent lid is keyed in one position to prevent misalignment. Lid...

Racks feature handles at both ends to accommodate freezers with right- or left-handed doors. Great for storing large quantities of slide boxes Get organized for easier retrieval of samples Easily access boxes from either side of rack Sturdy corrosion-resistant stainless steel construction for...

Racks feature handles at both ends to accommodate freezers with right- or left-handed doors. Adjustable clips offer the flexibility to hold 2"or 3" boxes or a combination of 2" and 3" boxes. Removable clips adjust to hold both standard 2" and 3" boxes Easily access boxes from either side of rack...

ABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height (mm): 673.1 Exterior Diameter...

For Matrix: 500ul (0,5ml) Latch Rack (H=1 1/16"/27.48mm) For Micronic: Loborack 96 with Low Cover (H= 15/16"/23.8mm) For FluidX: Low Profile 96 format for 0.5ml and 0.75ml tube w/low profile lid (H=1"/26.0mm) For Abgen: 0.3ml 2D Barcoded Storage Rack (H=1 1/8"/28.45mm)

Conveniently store microtiter plates. Included locking rods keep plates in place Handles on either side for quick storage and retrival of rack Corrosion-resistant stainless steel construction for durability

Use these vertical racks with a wide variety of chest freezers and liquid nitrogen tanks. Dual handles make it easy to place racks in and out of freezers and nitrogen tanks. Aluminum racks offer better temperature uniformity in vapor phase in liquid nitrogen tanks Lightweight aluminum construction...

PREMIUM QUALITY || Premium quality test tube stand featuring a sturdy beech wood construction that will stand up to the wear and tear of the lab DUAL FUNCTION || Rack holds 13 tubes - top shelf of rack holds seven tubes up to 20mm and bottom holds six tubes up to 25mm. Features 6 draining pins....

Organize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam...

Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be used to...

Produced from polypropylene (PP) Autoclavable Excellent rack for benchtop use or freezer storage.   Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well racks have translucent...

Great alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto...

Rack for 15mL & 50mL centrifuge tubes, orange, ships flat & is simple to assemble. Holds twenty 50mL and thirty 15mL centrifuge tubes.

Corning CoolRack thermo-conductive microfuge tube modules eliminate variability which originates from tubes placed directly into ice, dry ice, alcohol baths, water baths and other temperature sources. Place the CoolRack module directly onto a temperature source between -196°C to >100°C...

Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can be stacked...

The culture tube rack is designed for roller culture tubes. Manufactured from 303 stainless steel construction. Includes spring clips that prevent tubes from moving in the rack.

Upright Freezer Drawer Rack for storage bottles, 3 drawers 22 x 9 1/8 x 5 1/2" (L x H x W)

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x 12. 9260B25 and...

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter