Glass Joints & Adapters

Synthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The PTFE stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus. Similar to CG-1016, but made entirely of PTFE.

With standard taper joints and indentations to support packing. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.,/p>

With standard taper outer or spherical socket joint at one end and a hose connection at the other end.

Ideal for use as a vent or for the introduction of pressure/vacuum. Inner Standard Taper joint at one end and vertical hose connection at the other Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Synthware inlet adapter with a standard taper inner joint. Design allows introduction of reactants below the surface. The serrated hose connections have an O.D. of 10 mm.

Helps reduce cross contamination Size 1 hose connection Popular joint sizes Easy sample concentration and clean up Kontes luer adapter converts standard taper glassware to a luer joint. Adapter is available in most popular joint sizes and includes an integral vacuum connection. Adapter use a female...

Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration with the exception of CG-1030-45 which has an O.D. of 14mm.

Synthware distilling adapter with top compression cap. With same size standard taper inner joints on bottom and side arm. Cap accomodates 5.0 - 7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton o-ring.

Peptide Synthesis Vessel, Solid Phase, Vacuum, Synthware, Capacity: 10-100mL available, Frit Porosity: Medium abd Coarse availabe, Frit OD: 15-40mm available, GL Thread: 14 or 25 available, Hose Connection OD: 8mm, Supplied with PTFE lined screw cap and straight bore stopcock with 2mm bore.

Barrett style distilling receiver used to determine the water content in petroleum or bituminous material. Receiver is made according to ASTM specifications, with the addition of the top outer standard taper joint and lower stopcock. Available with glass or PTFE stopcocks.

These PYREX® angle connecting adapters have a sidearm at an approximately 75° angle from the lower joint. The lower end and sidearm are equipped with inner 19/22 Standard Taper joints, and the upper end with an outer 19/22 Standard Taper joint. This tube is also a replacement part for...

Distillation Adapter, Microscale, Synthware, Joints: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

With return line to allow excess solvent to return to boiling flask. Suitable for ASTM D 95 and E 123. Joints are 24/40.

Designed for use with small quantities where hold up between the flask and receiver must be kept to a minimum. The thermometer bulb and stem serve as column packing. Upper hose connections are for cooling lines while the lower connection is for vacuum. Available with Vigreux indentations to improve...

With the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. For best result, use D272440.

Glass standard taper joint adapters featuring a drip tip and a right angle ground glass tube sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

Thermometer Adapter, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.

35/20 Socket joint to #7 Ace-Thred, 90 degree adapter with 0-5mm valve. Manufactured by Ace Glass, this manifold adapter integrates seamlessly into your laboratory glassware setup. It features a socket joint on one side and an Ace-Thred connection on the other, facilitating a seamless transition...

Peptide Synthesis Vessel, Solid Phase, Synthware, Capacity: 10-100mL available, Frit Porosity: Coarse or Medium available, Frit Diameter: 15-40mm Available, GL Thread: 14 or 25, Arm OD: 8mm, Supplied with a PTFE lined cap and T-bore PTFE stopcock with 2mm bore.

Vigreux distilling column with indentations over the entire length for improved vapor-liquid contact. KIMAX® column has a Standard Taper outer joint at the top and a Standard Taper inner joint at the bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type...

Similar to D451414-series but with the uptake tube vacuum jacketed to improve distillation performance. The jacket eliminates the possibility of condensation or recrystallization of distillate in the sidearm. With 2mm PTFE stopcock.

Adapter, #15 O-ring joint to 14/20, 19/22 or 24/40 inner joint Ideal for rigorous laboratory applications, this adapter features a #15 O-Ring joint to inner joint configuration. Designed to facilitate a secure connection between two pieces of glassware, it ensures a leak-proof environment for safe...