Select up to 3 products
Prevent serious injuries! These holders are designed to prevent free-standing gas cylinders from tipping over and injuring personnel. The cast aluminum holder can be secured to a wall or the side of a work bench. Each mount will secure a cylinder 4-15 inches in diameter.
Made of Pyrex® borosilicate glass (unless otherwise noted) for compatibility with ground joints, valves, and vacuum racks. Precision ground and highly polished for spinning stability and highest resolution.Tubes have round bottoms and include a sandblasted marking spot for labeling samples. Tubes...
Available in Vespel, graphite, or Vespel/graphite material. Vespel Ferrules 100% high-temperature polyimide Stable to 350°C Durable, leak-tight Graphite Ferrules Preconditioned to eliminate outgassing High-purity, high-density graphite Smoother surface and cleaner edges than conventional...
Ideal for all cell culture applications, insect, plant and bacterial. Reduced height vessels maximize incubator space. Specifications: 100mm Neck For Cap Assembly And Overhead Drive 45mm Vertical Sidearm Accept Port And Thermowell Assemblies Or Probes Supplied With 100mm Center Cap, 45mm Caps And...
IOB assembly uses smooth bearing action and fits under the 100mm screw cap with PTFE cap seal and silicone gasket. Allows for smoother and better mixing inside the spinner flasks. Specifications: Sizes: 3-6L
Septum is a very important component of syringe injection system. They are usually fabricated from elastomeric, self-sealing materials such as silicone rubber, neoprene or fluoroelastomers. It is suitable to conveniently introducing the sample without causing the system to leak. Improper septa...
Extended tip NMR pipettes for retrieving and adding sample in the NMR tube. Enhance the precision and accuracy of your molecular research with this NMR pipette tip. Designed for high-performance, it ensures seamless, contamination-free transfer of samples to NMR tubes for comprehensive analysis....
Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require.
Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.
Low Profile Stainless Steel Impeller, for 3 L Low profile Vessel. Specifications: Rigid Non-Warping Paddles Locking Ring Ensures That Impeller Stays In Place During Operation Designed For Use With Bellco Cap Assembly (#7764-10100) Impeller Assembly Height Adjustment Material: 316L Stainless Steel...
Tray main cable assembly, used with series 7693 automatic liquid sampler systems, model 7693A. Enhance the functionality of your gas chromatography system with Agilent Technologies' Tray Main Cable Assembly. Expertly designed for use with Series 7693 Automatic Liquid Sampler Systems, this...
Easy to install Attach to same fittings as original manufacturer's equipment Built-in frits in cat.#s 22820, 21610, 23031, and 23032 retain fine particles; adsorbents remove both moisture and hydrocarbons.
3/4" Septum Port w/cap and stopper. Specifications: 316 L Stainless Steel Ra 32 Finish
Liquid leak detectors are suitable to detect leaks. It is easy to use and inexpensive. When squirted on fitting, a leak becomes visible by the continuous formation of bubbles in the liquid. It is recommended to be used for leakage detection of fittings which have temperature below 100C. Legal...
caps included. Synonyms: Wilmad nmr tubes; nmr sample tubes; nmr tubes Legal Information: Wilmad is a registered trademark of SP Industries
Stainless Steel port plug fits onto stainless steel headplate for 3 & 7 Liter bioreactor vessel. Specifications: Material: 316L Stainless Steel w/ Electropolish 1/2-20 TPI Threads For 1/4" Port on Headplate Includes: Stainless Steel 1/428" Nut & O-Ring, Stainless Steel 1/4" Port Plug
Precision Wilmad NMR tubes are suitable for high field NMR spectroscopy. NMR tube has an open-top, screw-thread cap with a PTFE/silicone septum that permits addition of reactants or samples via syringe through the cap. Also good for sample storage. Caps and septa are replaceable.Excellent for...
General description Styrene/divinyl benzene co-polymer Retention Mechanism: Reversed-phase or Adsorption Sample Matrix Compatibility: Aqueous solutions Particle Size: 80-160 μm; Spherical Shape; Pore Size: 110- 175 Å; Surface Area: 900 m 2 /g Highly crosslinked, neutral,...
POLYGOSIL® Irregular silica phases for LC, C18 (ODS) modified for reversed-phase (RP) applications Features Irregular silica for analytical application, pH stability 2–8 Available pore sizes 60, 100, 300 and 1000 Å Available particle sizes 5 µm, 7 µm and 10 µm
Vertical Disk Impeller Specifications: Material: 316L Stainless Steel For Bioreactor System
1 16 stainless steel tubing cutter produces square, smooth cuts Eliminates tubing distortion Cuts hard or soft copper, aluminum, brass, stainless steel, Monel alloy, or titanium Replaceable cutting wheel
The coaxial set is recommended for high field experiments under 600 MHz.Features: •Switch between three unique sample ratios during external referencing experiments •Ideal for variable temperature experiments as materials is the same between the tubes and spacer •In the complete set the insert and...
Include loop, nut and ferrule, 1/16 in. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
The Norell Standard Series NMR tubes are redesigned to eliminate tube wall and bottom variations. This improves shimming times and sample reproducibility.Manufactured out of ASTM Type 1 Class B glass, or commonly referred to as N-51A, these NMR tubes are designed for auto-sampling systems and...