GC Equipment & Instruments

Synonym: StableFlex™ 2CM SPME FIBER PK3,50/30UM DVB/CARBOXEN-PDMS Application Odor Compounds Footnote Coating bonded to a flexible fused silica core, yielding a more suitable coating on a less breakable fiber. There may be a slight difference in extraction selectivity compared to the same...

Manufactured from 316L stainless steel with electropolish finish RA 32 or better inside and out. Used for GL45 sidearms. Includes polypropylene blue open top screw cap and white silicone liner. Individual ports for liquid additions or redundant vent overlay VSA vessels for acid. Specifications: For...

Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require. Fused silica adaptor ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize...

Fits 8 mm OD liners Restek's Graphite Sealing Rings are designed to provide a secure and reliable seal for Thermo Scientific TRACE, 8000, 8000 TOP, and Focus SSL instruments. These sealing rings are manufactured from high-purity graphite, offering excellent thermal stability and chemical resistance....

Designed specifically for Agilent GCs, the 4.0mm ID Cyclo Double Taper Inlet Liner serves to improve the accuracy and precision of your analytical results. This liner, equipped with split/splitless inlets, ensures the effective vaporization of samples while minimizing sample loss. The double taper...

These plastic caps will easily slip over the ends of packed GC columns to protect them during storage. Application: Plastic column cup maybe used to close the immunoaffinity chromatography column used for separating cross-linked protein complexes adhering to P1 protein of Mycoplasma pneumonia.

Our most popular grade of tubing. Recommended for: Chromatography applications Gas delivery systems Lower pressures Inert applications Maximum temperature of 450°C in an inert atmosphere.

EI (electron ionization) filaments meet or exceed original manufacturer's performance. Every filament is subjected to QC tests, including heat, electrical current, and resistance. Samples from each filament manufacturing lot are installed in an MSD for in situ testing.

L/H Stainless Steel Pitch Blade Impeller Assembly For 10 liter Vessels. Specifications: Material: 316L Stainless Steel w/ Electropolish Finish Left Hand Dimensions: 3 1/4" Usually Requires 2 Each

Stainless Steel Port Assembly, for 6 Liter Low Profile Vessel with Vertical Side Arms. Use for the addition or removal of liquids or media within the vessel. Specifications: 45mm Blue Polypropylene Screw Cap White Silicone Gasket 316l Stainless Steel Electropolished, Ra 32 Finish Or Better Inside...

Water Jacketed Low Profile Over Head Drive Vessel w/ 6 Sidearms 6L Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 300mm Od X 325mm Overall Height With Six (6) Vertical 45mm Sidearms Supplied With: 100mm Pp Blue Screw Cap & White Silicone Liner & Six (6) 45mm Sidearms...

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: #4 Hose Barbs For 1/2" Id Tubing Material: Type 1 Class A Borosilicate Glass Supplied: 45mm Polypropylene Blue Cap & Pouring Ring Size 3-6L

Clear Fused-Quartz (CFQ), is a naturally occurring material. It has a high dielectric constant and low levels of paramagnetic impurities. This NMR tube is suitable for use in routine testing in EPR spectropscopy, excluding UV irradiation and samples with low sensitivity. Synonyms: Wilmad nmr tubes;...

Shigemi NMR microtubes offer high precision quality in NMR spectroscopy. The NMR microtubes are made out of a special type of hard glass wtih excellent chemical durability, and are magnetic susceptibility matched to each of the solvents they are identified with.The Symmetrical NMR microtube consists...

MilliporeSigma's Hellma absorption cuvettes are precision-engineered for spectroscopic analysis, providing accurate optical measurements. These cuvettes are crafted from high-quality materials to ensure transparency and minimize light scattering. They are suitable for use with a wide range of...

The Norell Standard Series NMR tubes are redesigned to eliminate tube wall and bottom variations. This improves shimming times and sample reproducibility.Manufactured out of ASTM Type 1 Class B glass, or commonly referred to as N-51A, these NMR tubes are designed for auto-sampling systems and...

Hellma® absorption cuvettes, standard cells, Macro with PTFE stoppers (spectral range 200-2,500 nm, pathlength 10 mm, chamber volume 3,500 muL) are available in high-performance Suprasil quartz material. The highest level of sensitivity in the measurement can be achieved by suitably selecting the...

Septum is a very important component of syringe injection system. They are usually fabricated from elastomeric, self-sealing materials such as silicone rubber, neoprene or fluoroelastomers. It is suitable to conveniently introducing the sample without causing the system to leak. Improper septa...

Port Plug Assembly. Specifications: Used in 3, 7, and 10L Bioreactors Includes O-Ring and Hex Nut

Usable to 350 °C inlet temperature.* Ultra-low bleed minimizes background signal. New plasma coating eliminates sticking in the injection port. Precision molding ensures consistent, accurate fit. Septa have a CenterGuide design to minimize coring. (Not available on 6 mm, 7 mm, 8 mm, 9.5 mm, 10...

This new range of premium quality NMR sample tubes feature color-coded banding and caps and a MHz rating that allows instant visual identification to tube grade and application. No more mix ups after cleaning.Precision grade NMR tubes are made from Type I, Class A, thin-wall (0.38 mm) borosilicate...

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime. Use partitioned tubes for general purpose work and when you need the best detection limits with samples that have low...

Agilent’s QuickSwap microfluidic switch accessory and pre-swaged fused silica tubing restrictors can increase the productivity of your Agilent 5973N and 5975 inert MSD systems, allowing you to change columns without venting the MSD. QuickSwap microfluidic switch not included. These restrictors...

Offering increased efficiency and performance, the Restek 0.75mm ID Straight/SPME Inlet Liner is a vital component for Agilent GCs equipped with split/splitless inlets. Designed to introduce samples into the Gas Chromatography system, this liner ensures optimal heat transfer from the heating block...