Select up to 3 products
Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
Hydrocarbon traps are basically suitable in GC for carrier gas purification, as the name suggests they are primarily used for trapping hydrocarbons. Some hydrocarbon traps, like the Supelpure® HC Hydrocarbon Trap, contain a carbon molecular sieve that also restricts the elution of moisture and...
Ideal for high-flow split applications >500 mL/min. Washerless, leak-tight seals
Heating and cooling Coils are used for cell culture temperature manipulation within the bioreactor vessel. Must be hooked up to a water circulating mechanism for heating or cooling. Specifications: Material: 316L Stainless Steel Tubing: 5/16" Overall Length: 17 5/8" Coil: 4 5/8: Number of Turns: 5
The ion source operates by electron ionization (EI) or chemical ionization (CI). The sample enters the ion source from the GC/MSD interface. This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for sale/shipment within the US only. International...
Polypropylene gas sampling bulbs have polypropylene stopcocks with free-turning Teflon® PTFE plugs. Ends accept 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Tube body is 5.1cm (2") O.D. x 22.2cm (8-3/4") long Stopcocks are 6.4cm (2-1/2") long Maximum recommended pressure is 15 psi...
Flowmeters that can measure flammable gases are becoming mandatory due to the increased use of hydrogen in chromatography. With its Ex rating, the Restek ProFLOW 6000 meter is designed specifically with explosive and flammable gases in mind. The Restek ProFLOW 6000 is the only flowmeter you need for...
General purpose columns exhibiting extremely low bleed Low polarity phase, proprietary Low bleed for excellent signal-to-noise ratio, sensitivity and mass spectral integrity Ideal for analysis of active, high molecular weight compounds with sensitive GC/MS systems Applications: Pesticides PCB...
Characteristics: Ideal for connection to mass spectrometers. High reusability. Isothermal use only. Material Composition: Ceramic-filled PTFE Maximum Temperature: 250°C
Tubes have round bottoms and include a sandblasted marking spot for labeling samples. Tubes that are 9 in. L are for making standards and for use with tip-off manifolds. Economy and disposable Wilmad NMR tubes are best used for high-throughput NMR spectroscopy. (All economy tubes come with caps)...
The Perfect Combination of Low Bleed, Thermal Stability, and Easy Puncturability!Molded Thermogreen LB-2 septa are manufactured from high quality, low bleed material using the same exclusive LB-2 rubber formulation that chromatographers are accustomed to using. The difference is that molded septa,...
Includes twelve hex keys (Allen wrenches): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", and 5/16".
Supelpak-2SVM is purified Amberlite XAD2 that has been specially cleaned and tested for optimal performance in the capturing and extraction of semivolatile organics. Packaged in glass containers. Application: Supelpak(TM)-2SVM may be used in the separation media for LPLC/TLC/paper chromatography....
Programmable Sample Dispensers (PSD) used with Graphite Furnace AA. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
Recommended for most mass spectrometers. Ease at cold start. Low vapor pressure 10 -7 torr. Nontoxic and noncorrosive. Compatible with buna-N, neoprene, and Viton seals. Optimum vacuum pump performance. Lowest mass spectrometer background. Recommended for optimum mass spec performance.
Made of high-quality stainless steel Meet or exceed original manufacturer's performance
Use this aluminum oxide powder to clean surfaces that contact the sample or ion beam when you encounter poor sensitivity and inadequate abundances at high masses.
3/8" Addition Port Assembly For 3, 7 and 10 liter Bioreactor Systems/Vessels. Hose barb end allows easy attachment of silicone tubing. Specifications: English Threads Fits .375" Hole In Headplate Dimensions: 2" Long Tube: 1/4" OD X 5/32' ID Material: SST 316L - Ra 32 Finish - Inside & Out With...
Two-way valves made of solid PTFE with hose nozzles. Resistant to chemicals. Very easy connection thanks to its excellent antifriction properties. Blue handles made of PP. Resistant to compression max. 1 bar Vacuum suitable up to 10 -1 mmHg Autoclavable
Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require. Connect three lines. 300 series stainless steel; stainless steel ferrules included. For 1/16" OD tubing.
Made of Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Precision ground and highly polished for spinning stability and highest resolution. Tubes have round bottoms and include a sandblasted marking spot for labeling samples. Tubes are thin-walled. Tubes...
PTFE-fused septa are suitable to overcome the degradation due to prolonged high temperatures which occurs in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE face towards the column packing. Application: Glass vials equipped...
Securely holds up to 36 headspace vials (fits 6, 10, or 20 mL vials). Vials lock in rack for convenient one-handed cap removal. Openings in the bottom of each well facilitate drainage. Alphanumeric indexing on rack simplifies sample identification. Easy to clean and fully autoclavable.*...
caps included. Synonyms: Wilmad nmr tubes; nmr sample tubes; nmr tubes Legal Information: Wilmad is a registered trademark of SP Industries