Select up to 3 products
All components are available separately. The Simport CytoSep™ Cytology Funnel offers the 1-ml fluid chamber component including the 1 ml fluid chamber, 1 ml base holder, 1 ml chamber cap, and the appropriate filter paper.
Side operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore housing.This offers a unique flexibility...
2 PARTS || Büchner funnel with straight sides, two interlocking parts and a perforated filter plate is made of high quality polypropylene SEPARATION || For use in filtration (separation of solid matter and fluid) - Two parts combine forming a vacuum seal which does not require greasing FILTER...
Providing excellent clarity and strength, this pear-shaped funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self-lubricating PTFE plug, is push-fitted to the stem of the funnel. Not Graduated.
Cylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE or metering valve stopcock plug.
For use in the Disinfectant Testing Procedure as described in the AOAC manual Cylinder ends are lightly glazed
Unsurpassed for non-vacuum, high-speed filtration, these clear funnels have internal helicoid ribs to increase the filtration speed. Vertical outer ribs prevent airlock Autoclavable polymethylpentene plastic; unaffected by corrosive liquids Heat resistant to 177ºC (350ºF)
Utility funnel set made of polypropylene or high density polyethylene. They are inexpensive, lightweight and designed for general use. Funnel set consists of 1233 series funnels: 4 oz polypropylene (1211A40), 8 oz polypropylene (1211A41), 16 oz high density polyethylene (1211A42), 32 oz high density...
KIMAX funnel used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. Funnels are constructed with heavy-walled stems, and top rims are beaded for extra strength. With a marking spot. Designed from Federal Specification DD-F-776.
Addition Funnel, Pressure Equalizing, PTFE Stopcock, Synthware, Capacity: 25-1000mL available, Joints: 14/20 or 24/40 available, Stopcock Bore: 2 and 4mm available. Funnels come with PTFE stopcock in pressure equalizing line.
Sturdy polypropylene construction is chemical resistant and steam sterilizable at 121º C (250º F). Faster filtrations with filter-step internal design. Ribs molded in outer wall prevent airlock. Parallel funnel stem, 8mm O.D, fits into most narrow mouth containers. 1226C20: top I.D. diameter: 55mm,...
Solvent Addition Funnel Top Diameter: 90mm Stem OD: 12, 19 or 28mm available Stem Length: 75,100, or 125mm available Design permits the addition of solvents to flash chromatography columns without disturbing the silica gel/packing layer.
Cylindrical shaped separatory funnel having a lower standard taper inner joint and a top outer joint, both being the same size. Graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Funnels with 14/20 and 19/22 joints are supplied complete with a...
These PYREX® Hirsch funnels have a 20mm or 30mm diameter and medium or coarse porosity fritted disc. These fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals which would attack filter paper....
60° Cone Heavy-duty polypropylene with smooth walls xternal ribs prevent air lock Steam autoclavable at 121°C (250°F)
Buchner funnels available with medium porosity (45-90 microns) or coarse porosity (90-130 microns). Fixed and removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. Buchner funnels are also available...
Separatory Funnel, conical Shape with PTFE Stopcock and Plastic Stopper.
Our Powder Funnel is made of borosilicate glass and has a 100mm diameter. Powder funnels are great for solid substances due to their short, wide stem. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm. Units are...
Graduated addition funnel featuring standard taper joints,graduations in both ascending and descending volume,protected drip tip and a glass stopcock. Graduations are calibrated from the stopcock.
Avoid breakage and corrosion with Thermo Scientific™ Nalgene™ Heavy-Duty LDPE Funnels, the toughest large funnels available. Lighter weight than glass or metal funnels, these low density polyethylene funnels provide you with long-term use. Durable large funnels are designed for...
KIMAX funnel constructed with heavy uniform walls and molded rims and fire polished stems to give a long service life. Funnels have a high resistance to chemical attack and mechanical and thermal shock. The 58° funnel angle is a Kimble exclusive, formed to an exact angle for rapid filtration. The...
Set of seven neoprene adapter cones designed to fit Buchnew and fritter glass funnels, porcelain filters without headpieces, and for reverse flow cleaning for filter crucibles. Adapters can be used to support funnels, Gooch crucibles, filter tubes and other apparatus in filtration assemblies These...
The Glass Funnel for Conv Base is designed for efficient filtering applications, providing reliable performance in laboratory operations. Made from high-quality glass, it ensures chemical resistance and clarity, facilitating precise observation during use. Its conical shape aids in smooth and rapid...