Select up to 3 products
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
Squibb style separatory funnel with a PTFE stopcock. Not supplied with stopper. For stoppers see CG-3000. Stopcock bore on all sizes is 2mm.
These replacement 125mL PYREX® glass separatory funnels have inner and outer 19/22 Standard Taper joints. They require Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcock plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For...
Table-top Buchner funnels with medium porosity (45-90 microns) (90-130 microns) removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16")...
Manufactured with 304 Stainless Steel, United Scientific™ REUZ™ (“re-use”) Stainless Steel Funnels include an air channel engineered for smooth, easy flow. Useful in laboratory or factory environments, the versatile funnels can be used with most liquids and powders. Carefully constructed, the...
Manufactured from thick walled borosilicate glass, funnels include a beaded rim and a fritted disc with coarse, medium or fine porosity.
Designed for particulate or biological contamination analysis of small volumes using a vacuum filter. Includes a stainless steel filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated...
These 4L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 8 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For...
for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent purification, particulate...
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
Separatory Funnel, PTFE Stopcock PTFE or Glass Stopper Capacity: 10-1000mL Stopper Joint: 14/20, 19/22, 24/40, 29/42, No. 13, No. 22, No. 27 and No. 16 available Stopcock Bore: 2 or 4mm
Perfect for micro work, filling burettes, manometers and small bottles. Polypropylene plastic Steam autoclavable at 121°C (250°F)
For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material being filtered. The disc...
FILTER FUNNEL || Filter funnel measuring 2" wide. Useful for separating solids from liquids, as well as for easier transfers of liquids to narrow mouthed containers INDUSTRIAL QUALITY || Made of chemical resistant polyethylene plastic 1.9 INCH STEM || Funnel stem measures 1.9" in length and has an...
A good quality Polyethylene powder funnel for general lab use. Dimensions are 23mm stem diameter, 105mm top diameter, and 95mm overall length. Capacity is 150ml.
Designed to handle liquids for analysis of particulate or microbiological contamination; funnels are graduated for accuracy Choose the Ultra-Ware microfiltration assembly that best fits your application Fritted Glass Support, 25 mm (4588A01) Used for general filtration. Supplied with a coarse...
Specially designed for transferring powders Polypropylene funnels with 60° angle Large bore stem minimizes bridging of powder Steam autoclavable at 121°C (250°F)
These 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel The plug...
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
Funnel Anti Splash 24 Oz. (1211A30) Product Dimensions (l x w x h) : 0x5.75x6.5in 240 ounce capacity low-density polyethylene funnels with Bronze mesh filter feature an anti-splash ring that eliminates spilling of liquids caused by the swirling action created when a liquid is poured into...
MICROFILTRATION WITH GROUND JOINT The 90 mm filtration assembly with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This unit is also recommended for filtering...
Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock cannot fall out...
KIMAX funnel constructed with heavy uniform walls and strong, molded rims and fire polished stems to give a long service life Funnels have a high resistance to chemical attack and mechanical and thermal shock 58 º funnel angle is a Kimble exclusive, formed to an exact angle for rapid filtration...