Filtering Funnels & Adapters

This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and...

Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402. Improved design incorporates a delivery stem being sealed within the inner joint to prevent breakage....

The GVS Analytical Funnels & Monitors meet the standard method requirements for a disposable device. Each sterile analytical funnel and monitors include a removable NC membrane.  Analytical funnels are ready-to-use 100 ml filtration units with membrane and culturing devices. After...

Buchner Funnel, Fritted Disc, Inner Joint Capacity: Avilable in multiple capacities ranging from 15-600mL Joint: Multiple Joint sizes available Frit OD: ranging form 20-90mm Porosity: Medium and Course available Not recommended for filtration where pressure will exceed 15 psi

This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The...

Graduated addition funnels similar to 7268 series, except with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is either 2 or 4mm bore PTFE plug. Bot

Designed for bacteriological analysis where it is necessary to sterilize the filter holder with the membrane filter in place. The glass surface is coated with PTFE to avoid filter damage and membrane adhesion during autoclaving. Complete set includes a PTFE-faced borosilicate glass funnel and...

Used in applications where it is necessary to wash and re-dissolve the precipitate with chemicals that would attack standard filter paper. The 60º angle on the funnel permits removal of precipitates.

Heavy wall glass powder funnel. Angled to fit in multi-neck flasks and reactor heads. Standard taper inner bottom joint.

Applications Aseptic filtration Pharmaceuticals and biologics Suspended Solids testing for municipal, surface, ground, and drinking water Rocker MF Series are optimized for microbiological testing Lid on KP 47U can be vented aseptically using disposable syringe filter (luer slip connection)

Filter Funnel with Perforated Plate. To be used in conjunction with vacuum source to filter and collect fluids.

The CoorsTek Buchner funnel is used for separation and filtration of solids from liquids. The fixed perforated plate at the bottom contains small pores that allow the liquid to pass through while retaining the solid particles. It has glazed inside and out except for rim. Ceramic Buchner funnel...

Pressure equalizing, addition funnel featuring standard taper joints, protected drip-tip, equalizing arm and double scale graduations calibrated from the stopcock. Available PTFE stopcock styles are standard, metering or needle valve. Top stopper is not included.

Sartoclear Dynamics® Lab kits are designed for rapid harvesting 15 mL to 1,000 mL volumes of cell cultures in the lab, enabling clarification and sterile filtration to be performed in one step. These kits simplify the process by fully eliminating the centrifugation step otherwise needed for...

Fritted filter funnel has a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-961-01 0-4mm Chem-Vac™ Chem-Cap® valve. Top outer joint is the same size as the lower inner joint. Capacity listed is that above the fritted disc....

Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402.

Easy-to-clean two-piece, polypropylene plastic Buchner funnels include a molded in perforated plate. Lightweight; not top-heavy Steam autoclavable at 121°C (250°F) Use with Vac-Ring Filter Seal (1189N06) for quick filter setup

Buchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.

Specifically designed for use with 18, 24 and 36" Buchner Funnels, apply slight downward pressure and ‘sweep’ the trowel along the surface of the precipitate to quickly and efficiently smooth fissures appearing during the filtration process. Large surface area smooths fissures faster than...

Durable, versatile, assorted sizes Sturdy, polypropylene funnels Ridges help prevent vapor lock Recommended highly for continuous labwork Steam autoclavable at 121°C (250°F)

KIMAX funnel used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. With a marking spot Constructed with heavy-walled stems, and top rims are beaded for extra strength Designed from Federal Specification DD-F-776

Sartorius single-use polystyrene (PS) storage bottles are designed for safe, secure storage of tissue culture media and sera, buffers, and other aqueous solutions. Features & Benefits Single-use polystyrene bottles for storage of media, buffers, and other aqueous solutions Bottles featuring a...

Enhance your lab's filtration process with the Filtropur V100, Vacuum filtration unit. This innovative piece of equipment provides fast and efficient filtration of fluids in a laboratory setting. Its advanced design ensures consistent operation, while the sturdy construction promises long-lasting...

Funnel has a sealed-in glass fritted disc of the listed porosity. Useful wherever filter paper or membranes cannot withstand the chemical attack of the filtrate. Constructed with heavy wall stems and the top of the funnel is beaded for additional strength. Not recommended for use where pressure...