Syringe Filters

The Hamilton 700 series 10 uL syringe is suitable for use with cemented needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a temperature rating of up to 10 to 50 degree C and pressure rating of up to 2000 psig. This syringe has a needle inner diameter of...

Quick and efficient filtration of samples and all kind of solutions, solvents or gases Housing injected in Polypropylene or Acrylic Multifunctional Syringe Filters: equipped with luer-lock or luer-slip male connections for different applications Sterilized or non-sterile Available in bulk-packages...

Minisart Plus: Fast, sterile filtration of high particulate liquids. Surfactant-Free Cellulose Acetate membrane (SFCA) and binder-free glass fiber (GF) depth pre-filter.

75/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open...

EZLabpure™ syringe filters are optimized for the filtration of aqueous solutions and biological samples, featuring hydrophilic membranes that promote high flow efficiency. They are ideal for removing particulates and preparing samples prior to analytical methods such as HPLC, IC, and GC. Range...

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore...

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene...

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to filter...

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

Manufactured from Ultra High Molecular Weight (UHMW) foamed porous polyethylene Full flow design removes small particulates Fits securely on the end of a 1/8” cannula sample probe

Minisart HF: Sterile filtration and particle removal. These ready-to-use syringe filter with Polyethersulfone (PES) membrane have excellent flow speed and high filterable volume.

EZlabpure™ syringe filters are optimized for efficient sample prep of both aqueous and organic solutions. Ideal for removing particulates and clarifying samples before techniques like HPLC, IC, and GC, they’re also suitable for biological fluids, water-based media, and mild acids or...

Ideal for aqueous (non-acidic) or organic sample preparation and HPLC, GC or dissolution sample analysis. With its excellent flow characteristics, very low extractable levels and mechanical stability, Nylon offers the best combination of physical parameters to meet the most stringent analytical...

This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile, single-use...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

EZlabpure™ syringe filters are ideal for processing both water-based and solvent-based solutions, providing superior chemical compatibility and rapid filtration efficiency. Available in multiple membrane types with pore sizes of 0.2 µm or 0.45 µm, each filter is built with a...

3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and...

EZFlow 25mm sample prep syringe filters are designed for aqueous and orga-nic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are in a variety of filter...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

This 25 mm syringe filter with a Graduated Glass Fiber & Nylon membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of aqueous & mild organic solutions with high particulate levels. Low-extractable polyethylene housing Female Luer-Lok™ inlet and Male...

For particulate removal prior to HPLC analysis. Cellulose acetate membrane for biological or protein-based samples. Low nonspecific binding with limited chemical resistance. Good flow rate characteristics. HPLC certified Cellulose Acetate membrane Medical grade, virgin polypropylene housing Protein...

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open...