Select up to 3 products
No membranes to change - just replace the sensor once a year Probe stores wet or dry
Measure pH in samples as small as 10 microliters (1/10 of a drop) with great accuracy Compatible with most laboratory pH meters Well-suited for biological assays; use in containers such as 96-well plates, microcentrifuge tubes, culture tubes, serum cups, and NMR tubes Virtually unbreakable - feature...
4210B10 Optimal temperature range: 0 - 40°C Constructed with a clog-free Sure-Flow junction. Includes 60 mL of refill solution. Uses easily replaceable 4210B03 plastic membrane module. 4210B13 Highly selective for calcium over other divalent cations Polymer-membrane electrode measures calcium in...
Accessories: Ionic Strength Adjusting Solution (ISA) adjusts the pH of standards and samples used in ammonia measurements. Ammonia Standard Solutions; 0.1 M ammonium chloride or 1,000 ppm as N. Replacement Membranes or Membrane Caps; Loose membranes for probes with O-Ring membrane holder; membrane...
Built-in temperature sensor lets you take ATC readings with a single probe Includes a FREE electrode saver bottle to extend electrode life Feature a BNC connector for pH and a waterproof 6-pin connector for temperature All-in-One Waterproof electrodes feature a built-in temperature sensor for taking...
Orion ISE Reconditioning Solution for Sodium Electrode Ensure the accuracy and longevity of your sodium ion selective electrodes with this high-quality reconditioning solution. Specifically formulated to rejuvenate and maintain the optimal performance of your electrodes, this solution offers a...
pH combination electrode with plug head, Glass shaft, 3 x ceramic junction, gel electrolyte, Silamid®-reference system, sphere membrane, A-glass, length 120 mm, 12 mm Ø, -5...+80 °C, 0...14 pH
In order to to achieve long sensor life and faster electrode response times, it is recommended to store electrodes in our storage solution. It is an acid-buffered solution that ensures the regeneration of the electrode in addition to provide an optimized storage.
These single-junction electrodes are available with sealed epoxy body, or refillable glass body. Ideal for flat surface measurements such as paper or skin
The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature. Combine durability...
TRUEscience white smart cap supplied with Epoxy bodied pH electrode. Also requires compatible Android device or can be added to an existing kit for measuring multiple samples simultaneously. 1x smart pH cap in White, with beaker clip and temperature sensor attached 1x Epoxy bodied double junction pH...
Use to take mV readings Choose a single-junction electrode for field, clean water, and general-purpose applications; choose a double junction electrode for most applications including field, dirty water, heavy metals, and organics. Both models have a pin-type junction that provides low electrolyte...
Peek Shaft, Open Junction "Safelock" closing ring Silver ion trap pH-sensitive glass membrane Contains no poisonous heavy metals but consists solely of non-polluting silver/silver chloride components. An Argenthal element developed by Ingold provides a lead-off system which offers...
Permanently gelled Ag/AgCl electrolyte 0 to 12 pH range 0° to 80°C (32° to 176°F) temperature range Wick junction 5.93 in. long (15cm) x 0.25 in. diameter (6mm) body, 0.18 in. diameter (10mm) cap BNC Connector A routine wick junction, gel-filled pH measurement electrode with extended...
Use Thermo Scientific™ Orion™ pH Electrode Filling Solution with pH electrodes and reference electrodes. Packaged as five 2 oz. (5 x 60mL) bottles.
Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity
pH electrode for titrations in non-aqueous media, Glass shaft, ground joint-junction, electrolyte L 5034, Ag/AgCl-reference system, sphere membrane, A-glass, length 170 mm, 12 mm Ø, 0...+40 °C, 0...14 Ph
Calibration solution (4153R53) does not contain hazardous chemicals, is stable for up to one year (unopened) and can be used directly from the bottle with no mixing or diluting.
4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. Made...
Ideal for field, plant, or educational applications Connector type: BNC Waterproof
With an integrated temperature sensor, this maintenance-free gel-filled electrode covers most applications and offers automatic temperature compensation. Special features Unbreakable, chemically resistant POM shaft Integrated NTC 30 kΩ temperature probe Application Aqueous media in general,...
These economical electrodes are ideal for field, clean water, and general-purpose applications. Single-junction, epoxy-body, gel-filled pH electrodes Pin-type junction provides low electrolyte flow for long life High range of 0 to 14 pH 3 foot (1 meter) cable
Combined glass pH electrode with a movable easy-to-clean sleeve junction. Acid/base titrations in non-aqueous media. The all-rounder for uncritical non-aqueous sample matrices. Plug & Play sensor with integrated sensor chip for secure handling. Features and Benefits Sensor Chip A41 glass...