Glass & Disposable Chromatography Columns

Graphite-Vespel ferrules are composed of 85% Vespel polyimide and 15% graphite. These ferrules are ideal for MS applications as their nonporous material prohibits oxygen contamination, and they can withstand temperatures as high as 350°C. They are also widely used in GC inlets and detectors as they...

Bond Elut C8 has very similar properties to C18, but is not as retentive for nonpolar compounds due to its shorter hydrocarbon chain. This results in reduced carbon loading. C8 is an excellent replacement for C18 when analytes are too strongly retained for effective elution. The potential for polar...

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to...

Agilent offers various Intuvo GC columns (compatible only with Intuvo 9000 GC System) for the increasingly demanding analysis of environmental contaminants, including pesticides and polycyclic aromatic hydrocarbons (PAH), as well as volatile and semivolatile compounds. This product is only available...

The same Bondesil sorbent packed into Bond Elut cartridges is available in bulk for large-scale purification or packing custom cartridges. Bondesil bulk silica, carbon, and polymeric sorbents are designed for ultraselective chemical separation. The average particle size of Bondesil sorbents are 40...

The Agilent universal Y-splitter ultra inert press fit column connector made of high quality material is ideal for GC. Application: For GC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Bond Elut SAX is a strong anion exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking, CP-Sil...

Agilent SLE products use a broad-performance, inert diatomaceous earth sorbent for rapid, general sample preparation. Chem Elut and Tox Elut are economical SLE choices, available in buffered and unbuffered configurations. This product is only available to U.S. Domestic Customers. For research use...

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to...

Agilent J&W CP-Wax 52 CB is a high-polarity polyethylene glycol (PEG) phase with a wider temperature range than nonbonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature...

Scaling up from analytical HPLC to preparative HPLC can be costly and time-consuming. To avoid wasting supplies-and valuable samples-you must reliably predict the separation you will achieve when you scale to manufacturing levels. Agilent can help you rise to the challenge-whether you are scaling a...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to...

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless...

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,...

The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond,...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Bond Elut ENV, a PS-DVB polymer, is designed for the extraction of polar organic residues. It contains 125 µm spherical particles, advantageous for high volume, fast flowthrough applications. This product is only available to U.S. Domestic Customers. For research use only, not to be used in...

Agilent J&W DB-WAX is ideal for food, fragrance, and flavor applications. The column's lower temperature limit of 20 °C improves resolution of analytes with low boiling points. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent J&W CP-Sil 43 CB is a chemically bonded and cross-linked, moderately polar column with a 25% cyanopropyl/25% phenyl/50% dimethylpolysiloxane phase for specific selectivity. It separates aromatic from aliphatic hydrocarbons and is equivalent to a OV-255 column. This product is only available...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Agilent J&W HP-PLOT Al2O3 KCl is the least polar alumina phase and is deactivated with sodium chloride. It is the standard column choice for light hydrocarbon analysis, particularly C1 to C8 hydrocarbon isomers. Excellent for the quantification of dienes, especially propadiene and butadiene from...