Buffer Solutions

Buffer Solutions

Products (1429)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • TG-SDS Buffer (Tris-Glycine-SDS) 10X Solution

    The Bio Basic Inc. TG-SDS buffer (tris-glycine-SDS) 10x solution is suitable for laboratory and research use.

  • 1.0 M Tris HCl pH 7.8, 1L, Liquid (sterile filtered)

    1.0 M Tris HCl pH 7.8 is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 7.8. Meticulously prepared using ultra pure reagents dissolved in highly polished...

  • pH Buffer Powders

    Micro Essential

    Triple protective foil envelope of aluminum, polyethylene and paper which keeps the buffers dry and free flowing Makes a precise buffer solution when dissolved in 500 mL of distilled water Five envelopes per package 

  • Fluka Silver nitrate concentrate for 1L standard solution, 0.01  M AgNO3 (0.01 N)

    Chemical name: Silver nitrate Chemical synonyms: Silver nitrate solution Product Brand: Analytical Density (g/cm3): 1.04 Molecular weight: 169.87 Molecular formula: AgNO3 UN Number: UN 3082

  • Fluka Silver nitrate concentrate for 1L standard solution, 0.5  M AgNO3 (0.5N)

    Chemical name: Silver nitrate Chemical synonyms: Silver nitrate solution Product Brand: Analytical Molecular weight: 169.87 Molecular formula: AgNO3 Chemical purity: 99.5-100.5% UN Number: UN 3264

  • PIPES

    MP Biomedicals

    PIPES is a zwitterionic N-substituted aminosulfonic acid "Good" buffer. PIPES is used to buffer glutaraldehyde fixative solutions when fixing plant and/or animal tissue samples. This will help prevent the loss of lipids. It is also used to buffer glutaraldehyde and formaldehyde when fixing...

  • TISAB III, Standardized

    Composition: Water 67%, Ammonium Chloride 26%, Ammonium Acetate 5%, 1,2-Cyclohexylenedimaine Tetraacetic Acid 2%, Cresol Red 0% Density: 1.13 Color: Colorless liquid Physical State: Liquid pH Range: 4.8 to 5.2 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT...

  • Amino Acid Mix

    Amino Acid Mix

  • FLUKA Buffer solution pH 12.0 (20 °C)

    Honeywell Research Chemicals

    di-sodium hydrogen phosphate / sodium hydroxide solution Synonym(s): Sodium phosphate buffer solution; Buffer solution from phosphoric acid/di-Sodium hydrogen phosphate; Phosphoric acid/di-Sodium hydrogen phosphate solution Density: 1.00 g/mL at 20 °C

  • Fluka Potassium permanganate solution volumetric, 0.02  M KMnO4 (0.1N)

    Chemical name: Potassium permanganate solution Product Brand: Analytical Density (g/cm3): 1 Molecular weight: 158.03 Molecular formula: KMnO4 UN Number: UN 3082

  • 30mg/ml Gentamicin

    30mg/ mL Gentamicin, 1 mL, 100 Tubes per pack, Sterile. 3 pack.

  • ACES, Biological Buffer

    Spectrum Chemical

    CAS No.: 7365-82-4

  • 2XYT Agar Plates with Ampicillin-100, Sterile

    1.6% Tryptone, 1.0% Yeast Extract, 0.5% Sodium Chloride, 1.5% Agar, 100µg/ mL Ampicillin Sodium Salt

  • FLUKA Buffer solution pH 10.0 (20°C)

    Honeywell Research Chemicals

    borax / sodium hydroxide

  • CSPW1 Buffer

    Omega Bio-tek

    For Research Use Only. Not for use in diagnostic procedures.

  • 70% Ethanol

    70% Ethyl Alcohol

  • 10% Saline Solution, Sterile

    10% Saline Solution, Sterile. 10 mL Per Tube, 25 Per Pack. 4 pack.

  • Fluka Buffer solution pH 7.0 (20oC) potassium dihydrogen phosphate / disodium hydrogen phosphate,  with fungicide, traceable to SRM from NIST

    Chemical name: Buffer solution pH 7.0 (20 °C) Chemical synonyms: Potassium sodium phosphate buffer solution Density (g/cm3): 1 UN Number:

  • Buffer, reference standard pH 10.00±0.01 (25 °C)

    MDL Number: MFCD00130682 Storage: 15-25C Application: Buffer, reference standard has been used for pH meter calibration for adjusting pH of drug solutions and human neuroblastoma culture medium.

  • CertiPUR® Buffer Solution

    Density 1.001 g/cm 3

  • Bicine Buffer (0.5 M, pH 8.5)

    Components: Bicine(500 mM), Sodium Hydroxide(For pH adjustment) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 8.5 ± 0.15 Storage: 2-8°C

  • Buffer, Reference Standard, pH 1.07 ± 0.01 at 25°C

    pH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget...

  • LB Agar Plates with Chloramphenicol-15, Sterile

    1.0% Tryptone, 0.5% Yeast Extract, 1.0% Sodium Chloride, 1.5% Agar, 15µg/ mL Chloramphenicol

  • 10mg/mL Chloramphenicol Solution, Sterile

    10mg/ mL Chloramphenicol

  • < Previous
  • > Next

Compare Tool

Select up to 3 products