Filters, Syringe

mdi Nylon-66 membrane Syringe filters type SYGN incorporate a Nylon-66 membrane with a binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified...

mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought. These filters are ethylene...

Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.

Pistol-shaped, with diaphragm-type pump, for filling and delivery from most pipets size 1 mL to 75 mL Silicone rubber nozzle socket takes pipets with 3 to 9.5 mm o.d. mouths Internal intake and discharge valves are operated by spring-loaded buttons on handle; finger pressure controls flow. Check...

Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable.

High-quality Econofilters are shipped in large packs and are ideal for busy labs that need fast, efficient filtration. Ideal for busy, high-volume labs Choose from a variety of membrane types and pore sizes   Agilent Technologies products are intended for sale/shipment within the US only....

An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in Fine...

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

Finneran 25mm Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

Safe, convenient laboratory pipetting Pipets over 2,000 times without recharging Lightweight (<10 oz.), compact (<7 in.) and totally portable with power built into the handle filtered, fail-safe nosepiece provides positive protection for electronic components and prevents cross-contamination...<>

EZFlow 13mm and 25mm Sample Prep Syringe Filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety...

Minisart NML: Sterile and reliable filtration of small to medium volumes. Complete ready-to- connect filter units with Surfactant Free Cellulose Acetate (SFCA) membrane.

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and...

mdi Hydrophilic Polypropylene membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure...

Non-sterile, sample prep membrane filters 7 membrane types Female Luer-Lock inlet, male Luer-slip outlet Solvent resistant polypropylene housings PES, GMF, Polypropylene and Cellulose Acetate membranes are certified for Ion Chromatography The polypropylene housings with all Target syringe filters...

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10 bar)...

An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in...

mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum...

This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents Non-sterile

Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis. Provide superb chemical resistant for solvents or for aggressive aqueous liquids.

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore...

mdi PTFE membrane Syringe filters type SYTG incorporate a PTFE membrane with a multi-layered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified...

EZFlow 25mm High Particulate Syringe Filters are designed for high throughput filtration of viscous and particle-laden solutions. The syringe filter contains a filter membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm...