SP Bel-Art

Buchner funnels available with medium porosity (45-90 microns) or coarse porosity (90-130 microns). Fixed and removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. Buchner funnels are also available...

Ideal Vent for Tanks and Vats These polypropylene exhaust hoods are intended to rest on the rear edge of a tank and draw a stream of air across the top of the tank, away from the operator. An exhaust system is required. Formula for calculating required airflow for hood: 1.833 x 150 = 274.95 CFM....

Polypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by pushing the rack...

Neoprene fabrication Single piece glove Safeguards against gas, liquid or solid penetrants Clamping rings sold separately Use series 50029 for glove boxes with 6” glove ports (F50030-0000, F50028-2000) Use series 50025 for glove boxes with 8” glove ports (H50026-0000)

Can be used to transfer or ship vial or tubes. Rugged polycarbonate boxes withstand temperatures of -196°C to +121°C Select box to hold 1.2, 2.0 or 5.0 ml cryogenic vials Transparent lids are keyed for alignment and include numbering grid for sample identity 1222X70 Place: 25 Dimension: 76.2 x 76.2...

Strain or filter large particles Polyethylene perforated baskets Allows for rapid filling and draining Handy for transporting labware Chemical resistant, withstands acids and alkalis Service temperature up to 82°C (180°F)

Leaves surfaces chemically clean Protects glass Gives a perfect meniscus for precise volumetric work Each pack contains six 25 mL bottles of premixed chromium trioxide in solution, to be mixed with 9 lb. (5 pint bottle) concentrated sulfuric acid such as C746V01.

Unique  tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or...

Adheres to any clean surface, including Teflon® fluoropolymer resin coated materials, and peels off without leaving a sticky residue. Excellent for use with Write-On™ Multi-Roll Label Tape Dispensers (F13472-0000 and F13473-0000), sold separately. Pencil, ball-point pen or solvent ink marker remain...

These high-quality vacuum desiccators stay gastight allowing reliable dry storage or experiments over extended periods. Able to maintain 29in.-Hg vacuum for over 72 hours at room temperature, they provide vacuum integrity resulting in lower maintenance and greater peace of mind. Viton® 3-way...

With slightly tapered sides Cover has recessed bottom that extends approximately 11 mm into tray Listings indicate length x width at bottom x usable depth Excellent for storing, transport and sterilization of instruments Autoclavable

The polypropylene screw cap has a Viton® O-ring that allows the position of glass tubing to be adjusted as required. An O-ring on the taper provides best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing...

Lightweight, corrosion proof Molded polypropylene with rounded corners and smooth tapered sides for nesting Ideal for sterilizing instruments, bottles containing agar, deionized water and saline, along with other reagents Safely clean glassware Steam autoclavable at 121°C (250°F)

The Vac-Ring Filter Seal is a black neoprene gasket that fits Buchner funnel stems up to 22mm (7/8") diameter. Increase filtration flow rate by blocking ambient air flow during vacuum filtration. Fits Buchner funnels on vacuum flasks and regular funnels used over beakers

SP Bel-Art presents an innovatively designed wash bottle for diverse laboratory applications. Constructed from resilient low-density polyethylene (LDPE) with a wide mouth for effortless refilling, this wash bottle offers a safe and convenient solution to dispense liquids accurately. It features a...

Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf height: 3.4cm...

Permanently engraves in seconds Engrave test tubes, bottles, racks, keys, equipment, tools, electronics and more. Simply hold the Engraving Tool like a pen, press the power button, apply light pressure, and ‘write,’ to permanently mark most materials including glass, plastic, wood,...

Space saving rack Holds 5-8 rings 7.5” D x 6.75”H Autoclavable Simple rack for organizing and storing with minimum space requirements. Holds rings with a minimum I.D. of 0.7”. Circular base is 7.5” diameter and 6.75” high.  

The Ellipso-Spoon® Sampler has a specially curved shape that permits contact with all corners of bottles and containers preventing material loss. Crystals, powders, granulated and solid substances and thick liquids are easily retrieved. Autoclavable. Offset, deep spoon end retrieves material...

This versatile, rugged tray with lid is ideal for safely storing small items or holding instruments while autoclaving. Stacks with identical trays and lids to maximize cupboard and shelf storage capacity Shallow depth is useful for holding small vials or bottles in a water bath or on ice Inside...

Transparent, general purpose bags, useful for sample storage, protective wrapping, etc. Offered in two gauges Can be heat-sealed or tied shut. Ties are not supplied (see 1304J55).

SP Bel-Art's Easy-Squeeze LDPE Wash Bottle is engineered for efficient and clean dispensing of deionized water. Featuring a drip-free and sputter-free design, this bottle minimizes waste and contamination risks. The color-coded design, with a blue PP closure, allows easy identification among other...

Economical Weighted base for safety Ten slots for placement Perfect for storing clean, used, treated or untreated plates. Wide handles provide a secure grip during transportation. Polypropylene material reduces chipping and cracking. Flat area provided on rack for labeling. Dimensions: 8 x 15 x 9...

Sterileware® scoops are the perfect shape and size for taking samples, especially from wide-mouth containers. Individually sealed and sterilized in a polyethylene bag Bright red color reduces the chance of the scoop being accidentally left behind in a sample; can serve as a code to avoid cross...